Registration Dossier

Administrative data

First-aid measures

General advice: In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Inhalation: Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if
necessary. Consult a physician.
Skin contact: Wash off immediately with plenty of water for at least 15 minutes. Take off all contaminated clothing immediately. Consult a physician.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Ingestion: Do NOT induce vomiting. Call a physician immediately.

Fire-fighting measures

Suitable extinguishing media: Water spray, Dry powder, Foam, Carbon dioxide (CO2)
Further information: Standard procedure for chemical fires.

Accidental release measures

Personal precautions: Use personal protective equipment.
Environmental precautions: Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Use mechanical handling equipment. The material taken up must be disposed of in accordance with regulations.

Handling and storage

HANDLING
Safe handling advice: Wear personal protective equipment. Avoid contact with skin and eyes.
Advice on protection against fire and explosion: No special protective measures against fire required.
General advice
Avoid subsoil penetration.
Do not flush into surface water or sanitary sewer system.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
No dangerous good

Exposure controls / personal protection

The maximum allowable workplace concentrations for respirable and inhalable dusts are to be observed.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection: No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where dust, fibres and smoke occur, use self-contained breathing apparatus or breathing apparatus
with a type P2 or P3 filter, in compliance with EN 143.
Hand protection: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the
gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the
contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time
measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:Material: butyl-rubber;Break through time: >= 480 min;Material thickness: >= 0.7 mm
gloves suitable for splash protection:Material: Nitrile rubber/nitrile latex;Break through time: >= 30 min;Material thickness: >= 0.4 mm
Eye protection: Tightly fitting safety goggles
Skin and body protection: Protective suit
Hygiene measures: Take off all contaminated clothing immediately. Use barrier cream regularly.
Protective measures: Wear suitable gloves and eye/face protection. Avoid contact with the skin and the eyes. General industrial hygiene practice.

Stability and reactivity

Hazardous decomposition products: No decomposition if stored normally.

Disposal considerations

Product: Can be incinerated, when in compliance with local regulations.