Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information:
In case of accident or if you feel unwell seek medical advice (show label or SDS where possible).
After inhalation:
Provide fresh air.
After contact with the skin:
Wash with plenty of water or water and soap. In the event of a visible skin change or other complaints, seek medical advice (show
label or SDS where possible).
After contact with the eyes:
Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.
After swallowing:
Give several small portions of water to drink. Do not induce vomiting.

Most important symptoms and effects, both acute and delayed
Any relevant information can be found in other parts of this section.

Indication of any immediate medical attention and special treatment needed

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
water mist , extinguishing powder , alcohol-resistant foam , carbon dioxide , sand .
Extinguishing media which must not be used for safety reasons:
water spray , water jet .

Special hazards arising from the substance or mixture
Hazardous decomposition products: alcohols . Do not allow extinguishing water to enter sewerage, the soil or inshore waters.

Advice for firefighters
Special protective equipment for fire fighting:
Use respiratory protection independent of recirculated air.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment (see section Exposure controls/personal protection). Keep unprotected persons away. Avoid contact with eyes and skin.Avoid inhaling mists and vapours. If material is released indicate risk of slipping.

Environmental precautions
Prevent material from entering surface waters, drains or sewers and soil. Contain any fluid that runs out using suitable material
(e.g. earth). Retain contaminated water/extinguishing water. Dispose of in prescribed marked containers.

Methods and material for containment and cleaning up
Do not flush away with water. For small amounts: Absorb with a liquid binding material such as diatomaceous earth and dispose
of according to local/state/federal regulations. Contain larger amounts and pump up into suitable containers. Clean any slippery
coating that remains using a detergent / soap solution or another biodegradable cleaner. Exhaust vapours.
Further information:
Eliminate all sources of ignition.

Reference to other sections
Relevant information in other sections have to be considered. This applies in particular for information given on personal
protective equipment (section 8) and on disposal (section Disposal considerations).

Handling and storage

Precautions for safe handling
General information:
Avoid exposure by technical measures or personal protective equipment.
Precautions for safe handling:
Ensure adequate ventilation. Keep away from incompatible substances in accordance with section Stability and reactivity. Avoid breathing
dust/vapor/mist/gas/aerosol. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Spilled substance
increases risk of slipping.
Precautions against fire and explosion:
Flammable vapors may accumulate and form explosive mixtures with air in containers, process vessels, including partial, empty
and uncleaned containers and vessels, or other enclosed spaces. Keep away from sources of ignition and do not smoke. Take
precautionary measures against electrostatic charging. Cool endangered containers with water.

Conditions for safe storage, including any incompatibilities
Conditions for storage rooms and vessels:
Use seal-tight containers.
Advice for storage of incompatible materials:
not applicable
Further information for storage:
Protect against moisture. Keep container tightly closed and store in a cool, well ventilated place. Do not carry out refill operations
in storage rooms.

Specific end use(s)
No data are available.

Transport information

Land transport (ADR/RID)

UN number:
1993
Proper shipping name and description:
Entzündbarer flüssiger Stoff, n.a.g. .((Chlormethyl)triethoxysilan)
Chemical name:
(Chlormethyl)triethoxysilan
Language:
German
Class:
3
Classification code:
F1
Packaging group:
III
Labels:
3; flammable liquids
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1993
Proper shipping name and description:
Entzündbarer flüssiger Stoff, n.a.g. .((Chlormethyl)triethoxysilan)
Chemical name:
(Chlormethyl)triethoxysilan
Language:
German
Class:
3
Classification code:
F1
Packaging group:
III
Labels:
3; flammable liquids
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1993
Proper shipping name and description:
Flammable liquid, n.o.s..((chloromethyl)triethoxysilane)
Chemical name:
(Chloromethyl)triethoxysilane
Class:
3
Packaging group:
III
EmS code:
F-E, S-E
Labels:
3; flammable liquids
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1993
Proper shipping name and description:
Flammable liquid, n.o.s..((chloromethyl)triethoxysilane)
Chemical name:
(Chloromethyl)triethoxysilane
Class:
3
Packaging group:
III
Labels:
3; flammable liquids
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Maximum airborne concentrations at the workplace:
CAS No. Material Type mg/m3 ppm Dust fract. Fibre/m3
64-17-5 Ethanol AGW 960,0 500,0
-
Ethanol (CAS no. 64-17-5): Refer to Technical Rules for Hazardous Substances "TRGS 900" for more details on the German AGW.

Exposure controls
Exposure in the work place limited and controlled
General protection and hygiene measures:
Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. Do not eat, drink or smoke when handling. Wash hands
at the end of work and before eating. Avoid exposure - obtain special instructions before use. Keep working clothes separately.
Personal protection equipment:
Respiratory protection
In case of long or strong exposure: gas mask filter ABEK .
Hand protection
Protective gloves made of butyl rubber . Gloves suitable for up to 60 minutes' use. The selection of appropriate gloves not only
depends on the material, but also on other quality characteristics, and may vary depending on the manufacturer. Please observe
information from your glove supplier in terms of permeability and breakthrough time.
Eye protection
tight fitting protective goggles .
Skin protection
protective clothing, protective goggles/face protection . Clean work clothes regularly. After handling make sure skin is cleansed
and protected.

Exposure to the environment limited and controlled
Prevent material from entering surface waters and soil. Do not introduce large amounts into purification plants.

Further information for system design and engineering measures
Use only in closed systems. In the event of fill operations, ensure technical measures to minimise exposure.

Stability and reactivity

Reactivity; Chemical stability; Possibility of hazardous reactions
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
Relevant information can possibly be found in other parts of this section.

Conditions to avoid
none known

Incompatible materials
Reacts with: water , basic substances and acids . Reaction causes the formation of: ethanol .

Hazardous decomposition products
Under the effect of humidity, water and protic agents: ethanol .

Disposal considerations

Waste treatment methods
Material
Recommendation:
Dispose of according to regulations by incineration in a special waste incinerator. Observe local/state/federal regulations.
Uncleaned packaging
Recommendation:
Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used.
Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.
Waste Disposal Legislation Ref.No.(EC)
It is not possible to determine a waste code for this product in accordance with the European Waste Catalogue (EWC) since it is
only possible to classify it according to how it is used by the customer. The waste code is to be determined within the EU in liaison
with the waste-disposal operator.