Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,
consult an eye specialist.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Note to physician:
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.

Fire-fighting measures

Suitable extinguishing media:
water, dry extinguishing media, carbon dioxide, foam
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent
systems. Dispose of fire debris and contaminated extinguishing water in accordance with official
regulations.

Accidental release measures

Personal precautions:
Avoid dust formation. Ensure adequate ventilation.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater. Discharge into the environment must be
avoided.
Methods for cleaning up or taking up:
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling
Avoid the formation and deposition of dust.
Protection against fire and explosion:
The product is capable of dust explosion. Prevent electrostatic charge - sources of ignition should be
kept well clear - fire extinguishers should be kept handy.
Storage
Further information on storage conditions: Keep container tightly closed. Protect contents from the
effects of light.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Breathing protection if breathable aerosols/dust are formed. Particle filter with medium efficiency for
solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN
374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of
dust).
General safety and hygiene measures:
Wearing of closed work clothing is recommended. Avoid contact with the skin, eyes and clothing.
Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Disposal considerations