Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice: Do not get in eyes, on skin, or on clothing. Do not breathe vapor or mist. Immediately remove substance contaminated clothes and wash affected skin areas with soap and water

Eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep eye wide open while rinsing.

Skin contact: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Ingestion: Do not induce vomiting without medical advice. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately.

Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician or poison control center immediately.

Self-protection of the first aider: Avoid contact with eyes, skin and clothing.

Most important symptoms and effects, both acute and delayed: No information available.

Indication of any immediate medical attention and special treatment needed, notes to physician: Treat symptomatically.

Fire-fighting measures

Suitable Extinguishing Media: Use water spray. Carbon dioxide (CO2). Foam. Dry chemical.

Extinguishing media which shall not be used for safety reasons: Do not use water jetstream.

Specific hazards arising from the chemical: Causes severe burns. Produce flammable and toxic gases on contact with water.

Protective equipment and precautions for firefighters: Corrosive hazard. Wear protective gloves/clothing and eye/face protection. In case of fire: Wear self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Avoid contact with skin and eyes. Do not breathe vapor or mist. Keep people away from and upwind of spill/leak.

Environmental precautions: Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Do not flush into surface water or sanitary sewer system.

Methods and materials for containment and cleaning up: Prevent spreading over a wide area (e.g. by containment or oil barriers)

Methods for cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Handling and storage

Handling: Do not breathe vapor or mist. Do not eat, drink or smoke when using this product. Do not get in eyes, on skin, or on clothing. Do not ingest. Wear personal protective clothing. Handle in accordance with good industrial hygiene and safety practice. Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation.

Storage: Keep tightly closed in a dry and cool place. Keep in properly labeled containers. stainless steel. Polyethylene containers.

Shelf life: No information available

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
3267
Shippingopen allclose all
Labels:
8
Special provisions / remarks
Remarks:
UN3267, Corrosive liquid, basic, organic, n.o.s., (Benzyltrimethylammonium hydroxide), 8, PGII
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
3267
Shipping information
Proper shipping name and description:
Benzyltrimethylammonium hydroxide
Special provisions / remarks
Remarks:
UN3267, Corrosive liquid, basic, organic, n.o.s., (Benzyltrimethylammonium hydroxide), 8, PGII

Air transport (UN RTDG/ICAO/IATA)

UN number:
3267
Shipping information
Proper shipping name and description:
Benzyltrimethylammonium hydroxide
Special provisions / remarks
Remarks:
UN3267, Corrosive liquid, basic, organic, n.o.s., (Benzyltrimethylammonium hydroxide), 8, PGII
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls: Ensure adequate ventilation, especially in confined areas. To protect against splashes from pouring. Avoid formation of aerosol.

Personal Protective Equipment

Eye Protection: Tightly fitting safety goggles. If splashes are likely to occur, wear:. Face protection shield.

Skin Protection: Chemical resistant apron. Impervious clothing. Rubber gloves. Nitrile rubber. Neoprene gloves.

Hand Protection: Rubber gloves. Nitrile rubber. Neoprene gloves.

Respiratory protection: In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.

Protective equipment: Ensure that eyewash stations and safety showers are close to the workstation location.

General Hygiene Considerations: Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product. Take off all contaminated clothing and wash it before reuse. Wash hands before breaks and immediately after handling the product.

Environmental Exposure Controls: Prevent product from entering drains.

Stability and reactivity

Reactivity: No information available

Chemical Stability: Stability Stable under normal conditions.

Possibility of hazardous reactions: Hazardous Reactions Hazardous polymerization does not occur.

Conditions to Avoid: To avoid thermal decomposition, do not overheat.

Materials to avoid: Strong acids. Strong oxidizing agents.

Hazardous Decomposition Products: Thermal decomposition can lead to release of irritating and toxic gases and vapors, Amines, Alcohols

Disposal considerations

Disposal Considerations: Dispose of contents/containers in accordance with local regulations. Do not discharge product into the aquatic environment without pretreatment (biological treatment plant). Can be incinerated, when in compliance with local regulations

Waste from residues/unused products: Should not be released into the environment. Treat rinsing as for product disposal

Contaminated packaging: Empty remaining contents. Triple rinse containers