Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures


General advice: In the case of accident or if you feel unwell, seek medical advice immediately. When symptoms persist or in all cases of doubt seek medical advice.


Protection of first-aiders: First Aid responders should pay attention to self-protection, and use the recommended personal protective equipment when the potential for exposure exists.


If inhaled: If inhaled, remove to fresh air. Get medical attention if symptoms occur.


In case of skin contact: Wash with water and soap as a precaution. Get medical attention if symptoms occur.


In case of eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention immediately.


If swallowed: If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.


 


Most important symptoms and effects, both acute and delayed


Risks: Causes serious eye damage.


 


Indication of any immediate medical attention and special treatment needed


Treatment: Treat symptomatically and supportively.


(source: IPD-AC SDS, version 3.1).

Fire-fighting measures

Extinguishing media


Suitable extinguishing media: Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical.


 


Unsuitable extinguishing media: None known.


 


Special hazards arising from the substance or mixture


Specific hazards during fire-fighting: Exposure to combustion products may be a hazard to health.


Hazardous combustion products: Carbon oxides.


 


Advice for firefighters


Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.


Specific extinguishing methods: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.


(source: IPD-AC SDS, version 3.1).

Accidental release measures

Personal precautions, protective equipment and emergency procedures


Personal precautions: Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.


 


Environmental precautions


Environmental precautions: Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g. by containment or oil barriers). Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.


 


Methods and material for containment and cleaning up


Methods for cleaning up: Soak up with inert absorbent material. For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill with suitable absorbent. Local or national regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which regulations are applicable.


 


Reference to other sections


See sections "Handling and storage", "Exposure controls/personal protection", Toxicological information, Ecological information and "Disposal considerations".


(source: IPD-AC SDS, version 3.1).

Handling and storage

Precautions for safe handling


Technical measures: See section "Exposure controls/personal protection".


Local/Total ventilation: Use only with adequate ventilation.


Advice on safe handling: Avoid inhalation of vapour or mist. Do not swallow. Do not get in eyes. Avoid prolonged or repeated contact with skin. Wash skin thoroughly after handling.Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Take care to prevent spills, waste and minimize release to the environment.


Hygiene measures: If exposure to chemical is likely during typical use, provide eye flushing systems and safety showers close to the working place. When using do not eat, drink or smoke. Wash contami-nated clothing before re-use.


 


Conditions for safe storage, including any incompatibilities


Requirements for storage areas and containers: Keep in properly labelled containers. Keep tightly closed. Store in accordance with the particular national regulations.


Advice on common storage: Do not store with the following product types: Strong oxidizing agents.


(source: IPD-AC SDS, version 3.1).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Contains no substances with occupational exposure limit values.


Exposure controls


Engineering measures: Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.


 


Personal protective equipment


Eye protection:


Wear the following personal protective equipment:
Safety goggles
Equipment should conform to I.S. EN 166


 


Hand protection: Material: Chemical-resistant gloves.


Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. Breakthrough time is not determined for the product. Change gloves often! For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.


 


Skin and body protection: Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).


 


Respiratory protection: No personal respiratory protective equipment normally required.


(source: IPD-AC SDS, version 3.1).

Stability and reactivity

Reactivity


Not classified as a reactivity hazard.


 


Chemical stability


Stable under normal conditions.


 


Possibility of hazardous reactions


Hazardous reactions: Can react with strong oxidizing agents.


 


Conditions to avoid


Conditions to avoid: None known.


 


Incompatible materials


Materials to avoid: Oxidizing agents


 


Hazardous decomposition products


No hazardous decomposition products are known.


(source: IPD-AC SDS, version 3.1).

Disposal considerations

Waste treatment methods


Product: Dispose of in accordance with local regulations. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.


 


Contaminated packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal. If not otherwise specified: Dispose of as unused product.


(source: IPD-AC SDS, version 3.1).