Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 245-612-0 | CAS number: 23363-14-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_physical-and-chemical-properties.png)
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 11 September 2017 to 02 November 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Version / remarks:
- 2012
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- pycnometer method
- Key result
- Type:
- density
- Density:
- 1 680 kg/m³
- Temp.:
- 20 °C
- Key result
- Type:
- relative density
- Density:
- 1.68
- Temp.:
- 20 °C
- Conclusions:
- Under the conditions of this study the density of the test material has been determined to be 1.68 x 10³ kg/m³ at 20.0 ± 0.5 °C with a relative density of 1.68.
- Executive summary:
The density of the test material was investigated in accordance with the standardised guidelines OECD 109 and EU Method A.3, under GLP conditions.
The testing was performed using a pycnometer, duplicate determinations were performed to ensure a reproducibility of less than ± 20 kg/m³ was obtained.
In calibration, the reference cell volume and sample cell volume were within the defined tolerance (90.953 ± 1.0 cm³ and 149.225 ± 1.0 cm³ for the reference and sample cell volumes respectively) the gas comparison pycnometer was therefore considered acceptable for use.
Under the conditions of this study the density of the test material has been determined to be 1.68 x 10³ kg/m³ at 20.0 ± 0.5 °C with a relative density of 1.68.
Reference
CALIBRATION
Table 1: Pressure readings and the calculated volume for the reference and sample cells
Determination |
P1 (psig) |
P2 (psig) |
P3 (psig) |
P4 (psig) |
Reference Cell Volume (cm³) |
Sample Cell Volume (cm³) |
1 |
17.120 |
6.486 |
17.037 |
8.447 |
90.843 |
148.940 |
2 |
17.097 |
6.476 |
17.036 |
8.446 |
90.784 |
148.891 |
3 |
17.130 |
6.490 |
16.964 |
8.408 |
90.954 |
149.114 |
- Mean reference cell volume : 90.860 cm³ Mean sample cell volume : 148.981 cm³
- As the reference cell volume and sample cell volume were within the defined tolerance (90.953 ± 1.0 cm³ and 149.225 ± 1.0 cm³ for the reference and sample cell volumes respectively) the gas comparison pycnometer was therefore considered acceptable for use.
SAMPLE
Table 2: Pressure readings, calculated volumes and density values obtained for the test material
Determination |
Replicate |
P1(sample) (psig) |
P2(sample) (psig) |
Volume (cm³) |
Density (kg/m³) |
Mean Density (kg/m³) |
1 |
A |
17.013 |
7.273 |
27.3 |
1.68x10³ |
1.68x10³ |
B |
17.046 |
7.285 |
27.2 |
1.68x10³ |
||
C |
17.006 |
7.265 |
27.2 |
1.69x10³ |
||
2 |
A |
17.110 |
7.416 |
30.2 |
1.68x10³ |
1.68x10³ |
B |
17.042 |
7.387 |
30.2 |
1.68x10³ |
||
C |
17.504 |
7.586 |
30.2 |
1.68x10³ |
- Mean density: 1.68 x 10³ kg/m³
- Relative density : 1.68
- Temperature : 20.0 ± 0.5 °C
- Duplicate determinations were performed to ensure a reproducibility of less than ± 20 kg/m³ was obtained.
Description of key information
Under the conditions of this study the density of the test material has been determined to be 1.68 x 10³ kg/m³ at 20.0 ± 0.5 °C with a relative density of 1.68.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.68
Additional information
The density of the test material was investigated in accordance with the standardised guidelines OECD 109 and EU Method A.3, under GLP conditions. The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).
The testing was performed using a pycnometer, duplicate determinations were performed to ensure a reproducibility of less than ± 20 kg/m³ was obtained.
In calibration, the reference cell volume and sample cell volume were within the defined tolerance (90.953 ± 1.0 cm³ and 149.225 ± 1.0 cm³ for the reference and sample cell volumes respectively) the gas comparison pycnometer was therefore considered acceptable for use.
Under the conditions of this study the density of the test material has been determined to be 1.68 x 10³ kg/m³ at 20.0 ± 0.5 °C with a relative density of 1.68.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)