Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Inhalation: Move to fresh air. Get medical attention immediately if symptoms occur.

Skin: Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.

Eyes:  Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion: Do NOT induce vomiting.. Get medical attention if symptoms occur.

Fire-fighting measures

Suitable extinguishing media: Foam, Dry chemical, Water, Carbon dioxide (CO2)

Extinguishing media which must not be used for safety reasons: Do not use a solid water stream as it may scatter and spread fire.

Special exposure hazards arising from the substance or preparation itself, its combustion products, or released gases: Under conditions giving incomplete combustion, hazardous gases produced may consist of carbon monoxide

carbon dioxide (CO2)

nitrogen oxides (NOx)

Sulfur oxides (SOx)

Potential dust explosion hazard

Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective suit.

Environmental precautions: Dike and collect water used to fight fire.

Accidental release measures

Personal precautions: Use adequate ventilation. Keep away from heat and sources of ignition.

Environmental precautions: Do not discharge into the drains/surface waters/groundwater.

Methods for cleaning up: Contain spillage, pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container

for disposal according to local regulations (see section 13). Use mechanical handling equipment

Additional information: Consult trained personnel. Consider the information for "Personal Protection" in chapter 8 of this Safety Data Sheet.

Handling and storage

HANDLING

Hygiene measures: When using, do not eat, drink or smoke. Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Advice on safe handling: Avoid contact with skin, eyes and clothing. Do not breathe vapours/dust. Provide sufficient air exchange and/or exhaust in work rooms.

Incompatible products: oxidizing agents

Protection - fire and explosion: Take measures to prevent the build up of electrostatic charge. Avoid dust formation. Keep away from heat and sources of ignition. Potential dust explosion hazard.

Reduce the release of the substance or mixture to the environment: See Section 8: Environmental exposure controls

Temperature class: T3

Dust Explosion Group: ST1

STORAGE

Material storage: Store in a cool/low-temperature, well-ventilated, dry place away from heat and ignition sources. Keep away from direct sunlight.

Incompatible products: oxidizing agents

Technical measures/Storage conditions: Keep tightly closed in a dry and cool place.

German storage class: 11: Combustible solids.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
ADNR: Container and Tanker
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Hand protection: protective gloves

   - Suitable material: nitrile rubber

   - Type: Tricotril (Company KCL) or comparable article; or refer to glove manufacturer's recommendation

   - Evaluation: according to EN 374: level 6

   - Material thickness: approx. 1.5 mm

   - Break through time: 480 min

   

   - Suitable material: butyl-rubber

   - Type: Butoject (Company KCL) or comparable article; or refer to glove manufacturer's recommendation

   - Evaluation: according to EN 374: level 6

   - Material thickness: approx. 0.7 mm

   - Break through time 480 min

2. Body protection: protective suit

3. Eye protection: Safety glasses

4. Respiratory protection: No personal respiratory protective equipment normally required

Stability and reactivity

Reactivity: Stable

Chemical Stability: Thermal decomposition can take place above 210°C.

Possibility of hazardous reactions: None reasonably foreseeable.

Incompatible Materials: oxidizing agents

Hazardous decomposition products: Thermal decomposition can take place above 210 °C., Sulfur oxides, nitrogen oxides (NOx)

Disposal considerations

Product information: Disposal required in compliance with all waste management related state and local regulations. The choice of the appropriate method of disposal depends on the product composition by the time of disposal as well as the local statutes and possibilities for disposal

Uncleaned empty packaging: Contaminated packaging should be emptied as far as possible and after appropriate cleansing may be taken for reuse