Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 423-300-7 | CAS number: 128554-52-9
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General information: Immediately remove any clothing contaminated by the product.
· After inhalation:
Supply fresh air and call for doctor for safety reasons.
In case of unconsciousness bring patient into stable side position for transport.
· After skin contact:
Instantly wash with water and soap and rinse thoroughly.
If skin irritation or rash occurs: Get medical advice/attention.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
· After swallowing:
Rinse out mouth and then drink plenty of water.
Seek immediate medical advice.
In case of persistent symptoms consult doctor.
· After inhalation:
Supply fresh air and call for doctor for safety reasons.
In case of unconsciousness bring patient into stable side position for transport.
· After skin contact:
Instantly wash with water and soap and rinse thoroughly.
If skin irritation or rash occurs: Get medical advice/attention.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
· After swallowing:
Rinse out mouth and then drink plenty of water.
Seek immediate medical advice.
In case of persistent symptoms consult doctor.
Fire-fighting measures
· Suitable extinguishing agents
Carbon dioxide (CO₂), extinguishing powder or water spray/fog. Fight larger fires with water spray/fog or
alcohol-resistant foam.
· For safety reasons unsuitable extinguishing agents Water with a full water jet.
Special hazards arising from the substance or mixture
Nitrogen oxides (NOx)
Carbon monoxide (CO) and Carbon dioxide (CO₂)
Advice for firefighters
· Protective equipment: Wear self-contained breathing apparatus.
· Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Carbon dioxide (CO₂), extinguishing powder or water spray/fog. Fight larger fires with water spray/fog or
alcohol-resistant foam.
· For safety reasons unsuitable extinguishing agents Water with a full water jet.
Special hazards arising from the substance or mixture
Nitrogen oxides (NOx)
Carbon monoxide (CO) and Carbon dioxide (CO₂)
Advice for firefighters
· Protective equipment: Wear self-contained breathing apparatus.
· Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Avoid causing dust.
Remove all ignition sources.
Do not breathe dust.
Avoid contact with skin and eyes.
Environmental precautions:
Do not allow to enter drainage system, surface or ground water.
Inform respective authorities in case product reaches water or sewage system.
Methods and material for containment and cleaning up:
Ensure adequate ventilation.
Collect mechanically.
Send for recovery or disposal in suitable containers.
Dispose of the material collected according to regulations.
Ensure adequate ventilation.
Avoid causing dust.
Remove all ignition sources.
Do not breathe dust.
Avoid contact with skin and eyes.
Environmental precautions:
Do not allow to enter drainage system, surface or ground water.
Inform respective authorities in case product reaches water or sewage system.
Methods and material for containment and cleaning up:
Ensure adequate ventilation.
Collect mechanically.
Send for recovery or disposal in suitable containers.
Dispose of the material collected according to regulations.
Handling and storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of dust.
Any deposit of dust which cannot be avoided must be removed regularly.
Do not breathe dust.
Avoid contact with skin and eyes.
· Information about protection against explosions and fires: Keep ignition sources away - Do not smoke.
Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers:
Observe all local and national regulations for storage of water polluting products.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Store in cool, dry conditions in well sealed containers.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of dust.
Any deposit of dust which cannot be avoided must be removed regularly.
Do not breathe dust.
Avoid contact with skin and eyes.
· Information about protection against explosions and fires: Keep ignition sources away - Do not smoke.
Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers:
Observe all local and national regulations for storage of water polluting products.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Store in cool, dry conditions in well sealed containers.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- none
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- none
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- none
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- none
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
· Components with critical values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the compilation were used as basis.
Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Keep away from foodstuffs, beverages and food.
Do not eat, drink or smoke while working.
Instantly remove any contaminated garments.
Do not breathe dust.
Avoid contact with the eyes and skin.
Wash hands during breaks and at the end of the work.
· Breathing equipment: Use breathing protection in case of dust formation.
· Protection of hands:
Protective gloves
To avoid skin problems reduce the wearing of gloves to the required minimum.
Check the permeability prior to each renewed use of the glove.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
· Penetration time of glove material
Protective gloves should be replaced at first signs of wear.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses
· Body protection:
Protective work clothing
Protective clothing should be selected specifically for the working place.
· Components with critical values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the compilation were used as basis.
Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Keep away from foodstuffs, beverages and food.
Do not eat, drink or smoke while working.
Instantly remove any contaminated garments.
Do not breathe dust.
Avoid contact with the eyes and skin.
Wash hands during breaks and at the end of the work.
· Breathing equipment: Use breathing protection in case of dust formation.
· Protection of hands:
Protective gloves
To avoid skin problems reduce the wearing of gloves to the required minimum.
Check the permeability prior to each renewed use of the glove.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
· Penetration time of glove material
Protective gloves should be replaced at first signs of wear.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses
· Body protection:
Protective work clothing
Protective clothing should be selected specifically for the working place.
Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
To avoid thermal decomposition do not overheat.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: Strong oxidizing agents
Hazardous decomposition products:
Carbon monoxide (CO) and Carbon dioxide (CO₂)
Nitrogen oxides (NOx)
No decomposition if used according to specifications.
To avoid thermal decomposition do not overheat.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: Strong oxidizing agents
Hazardous decomposition products:
Carbon monoxide (CO) and Carbon dioxide (CO₂)
Nitrogen oxides (NOx)
Disposal considerations
Waste treatment methods
· Recommendation Disposal must be made according to official regulations.
· Waste disposal key number: According to local/national regulations.
· European waste catalogue:
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packagings:
· Recommendation:
Empty contaminated packagings thoroughly. They can be recycled after thorough and proper cleaning.
Packagings that cannot be cleaned are to be disposed of in the same manner as the product.
· Recommendation Disposal must be made according to official regulations.
· Waste disposal key number: According to local/national regulations.
· European waste catalogue:
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packagings:
· Recommendation:
Empty contaminated packagings thoroughly. They can be recycled after thorough and proper cleaning.
Packagings that cannot be cleaned are to be disposed of in the same manner as the product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
