Registration Dossier

Administrative data

First-aid measures

Remove contaminated clothing. If danger of loss of consciousness, place patient in recovery position and transport accordingly. Apply artificial respiration if necessary. First aid personnel should pay attention to their own safety. If difficulties occur: Obtain medical attention.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water. If irritation develops, seek medical attention.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion:
Rinse mouth and then drink plenty of water.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, dry powder
Special hazards arising from the substance or mixture
carbon oxides, nitrogenous compounds, amine derivatives
The substances/groups of substances mentioned can be released in case of fire. Under certain conditions in case of fire other hazardous combustion products may be generated.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid inhalation. Avoid contact with the skin, eyes and clothing.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Sweep/shovel up.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Precautions for safe handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated place. Protect against moisture.
Storage stability:
Storage temperature: -20 - 40 °C
Storage duration: 6 Months
From the data on storage duration in this safety data sheet no agreed statement regarding the warrantee of application properties can be deduced.
Low storage temperature can cause increasing viscosity of substance/product.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Class:
Not classified as a dangerous good under transport regulations
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Class:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Marine transport (IMDG)

Class:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Air transport ICAO/IATA

Class:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Respiratory protection in case of vapour/aerosol release.
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other
Manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment.

Stability and reactivity

Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
No data available.
Formation of flammable gases:
Remarks:
Forms no flammable gases in the presence of water.
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
When preparing reactive systems it must be observed that the ratio of retention time to reaction time is short. Reacts with acids.
Conditions to avoid
No special precautions other than good housekeeping of chemicals. Avoid humidity.
Incompatible materials
Substances to avoid:
acids, strong bases, Moisture
Hazardous decomposition products
Possible decomposition products:
amines, carbon oxides, nitrogenous compounds, The substances/groups of substances mentioned can be released in case of fire.

Disposal considerations

Incinerate in suitable incineration plant, observing local authority regulations.
A waste code in accordance with the European waste catalog (EWC) cannot be specified, due to dependence on the usage.
The waste code in accordance with the European waste catalog (EWC) must be specified in cooperation with disposal agency/manufacturer/authorities.
The UK Environmental Protection (Duty of Care) Regulations (EP) and amendments should be noted (United Kingdom).
This product and any uncleaned containers must be disposed of as hazardous waste in accordance with the 2005 Hazardous Waste Regulations and amendments (United Kingdom)
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling after being thoroughly cleaned.