1-methyl-N,N',N''-tris(1-methylpropyl)silanetriamine

Toxicity to microorganisms

Link to relevant study record(s)

Reference

Endpoint:

activated sludge respiration inhibition testing

Type of information:

experimental study

Adequacy of study:

key study

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

other: Guideline study. The study was conducted according to the appropriate OECD test guideline, and in compliance with GLP.

Qualifier:

according to guideline

Guideline:

OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test

GLP compliance:

yes (incl. QA statement)

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: 6432JL
- Expiration date of the lot/batch: 08/99
- Purity test date: not reported

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: in the original container, at room temperature in the dark.
- Stability under test conditions: Hydrolyses in water
- Solubility and stability of the test substance in the solvent/vehicle: n/a
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: n/a


OTHER SPECIFICS:
Colourless liquid.
Purity 92.6%

Activated sludge, microorganisms from a domestic waste water treatment plant; sewage plant Groβ-Zimmern, Germany.

Analytical monitoring:

no

Vehicle:

no

Details on test solutions:

PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: The test substance was directly weighed into the test flasks. Then, the test flaskes were filled each with 284 ml tap water to give concentrations of 10, 32, 100, 320 and 1000 mg/l.
The flasks were filled according to the scheme given in Table 1 in "any other information on materials and methods including tables".
Samples were prepared in about 15 minute intervals. Thereafter, the pH of the samples was noted, and aeration started using compressed air at a flow-rate of approximately 0.6 l/min.
- Controls: Control - Sewage feed, activated sludge and dilution water with no test substance. Positive control: 3,5-Dichlorophenol at concentrations of 10, 32 and 100 mg/l.
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): n/a
- Concentration of vehicle in test medium (stock solution and final test solution(s) or suspension(s) including control(s)): n/a
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): not reported

Test organisms (species):

activated sludge of a predominantly domestic sewage

Details on inoculum:

- Laboratory culture: no
- Name and location of sewage treatment plant where inoculum was collected: Groβ-Zimmern, Germany
- Method of cultivation: not reported
- Preparation of inoculum for exposure: The sludge was washed by centrifugation and the supernatant liquid phase was decanted. The solid material was re-suspended in tap water and again centrifuged. The latter procedure was repeated twice. An aliquot of the final sludge suspension was weighed, dried and and the ratio of wet sludge (g) to its dry weight (g) determined. Based on this ratio, calculated aliquots of washed sludge suspension, corresponding to 2 g dry material per litre, were made up with tap water. To this mixture, 50 ml synthetic sewage feed per litre was added daily starting four days prior to use, and the sludge was kept at room temperature under continuous aeration until use. Immediately before use the dry weight if the sludge was determined to be approximately 2 g/l. The pH of the activated sludge was deterrmined to be pH 7.7.

Test type:

static

Water media type:

freshwater

Limit test:

no

Total exposure duration:

3 h

Test temperature:

23°C

pH:

7.7

Dissolved oxygen:

Start: 5.1-6.7 mg O2/L
End: 6.1-8.2 mg O2/L

Salinity:

n/a

Conductivity:

not reported

Nominal and measured concentrations:

Nominal: control, 10, 32, 100, 320 and 1000 mg/l

Details on test conditions:

TEST SYSTEM
- Test vessel: Glass flasks
- Type (delete if not applicable): open / closed: not reported
- Material, size, headspace, fill volume: Glass, 1 litre in size, 500 ml fill volume
- Aeration: Yes with compressed air at approximately 0.6 litres/minute
- No. of vessels per concentration (replicates): 1
- No. of vessels per control (replicates): 2
- No. of vessels per vehicle control (replicates): n/a
- No. of vessels per abiotic control (replicates): n/a
- Sludge concentration (weight of dry solids per volume): 2g dry material/litre
- Weight of dry solids per volume of reaction mixture per unit of time: not reported
- Nutrients provided for bacteria: Synthetic sewage feed
- Biomass loading rate: not reported
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: tap water
- Particulate matter: not reported
OTHER TEST CONDITIONS
- Adjustment of pH: No
- Photoperiod: not reported
- Light intensity: not reported
- Details on termination of incubation: For the measurement of respiration rate, a well-mixed sample of each test medium was poured into a Karlsruher flask after exactly 3 hours incubation time, and was not further aerated. The oxygen concentration was measured with an oxygen electrode and was recorded for about 10 minutes. During measurement, the samples were continuously stirred on a magnetic stirrer.
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :Respiration rate measured after 3 hours. pH and oxygen concentrations were determined at the start and the end of the test in all concentrations.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: approximately 3.2
- Justification for using fewer concentrations than requested by guideline: n/a
- Range finding study: no

Reference substance (positive control):

yes

Remarks:

3,5-Dichlorophenol

Duration:

3 h

Dose descriptor:

EC50

Effect conc.:

715 mg/L

Nominal / measured:

nominal

Conc. based on:

test mat.

Basis for effect:

inhibition of total respiration

Duration:

3 h

Dose descriptor:

other: EC20

Effect conc.:

378 mg/L

Nominal / measured:

nominal

Conc. based on:

test mat.

Basis for effect:

inhibition of total respiration

Details on results:

- Any observations (e.g. precipitation) that might cause a difference between measured and nominal values: none reported
- Effect concentrations exceeding solubility of substance in test medium: not reported
- Adsorption (e.g. of test material to the walls of the test container): none reported
- Blank controls oxygen uptake rate: Oxygen consumption 0.301-0.311 mg O2/L min
- Coefficient of variation of oxygen uptake rate in control replicates: % deviation: 3.2

Results with reference substance (positive control):

- Results with reference substance valid?
- Relevant effect levels: EC50 10 mg/l
- Other:

Reported statistics and error estimates:

EC50 and EC20 calculated by probit analysis

Table 2: Influence of test substance on oxygen consumption of activated sludge

Flask no.	Treatment	Concentration (mg/l)	Oxygen consumption (mg O2/l min)	Inhibition (%)	pH value start*	pH value end*	Oxygen concentration (mg O2/l min) start*	Oxygen concentration (mg O2/l min) end*
1	Control	-	0.311	-	7.5	8.3	6.7	6.9
10	Control	-	0.301	-	7.4	8.1	5.5	6.0
mean			0.306
% deviation			3.2
5	Test substance	1000	0.076	75.3	8.2	9.3	5.4	8.2
6	Test substance	320	0.323	-5.7	8.2	8.5	5.6	6.5
7	Test substance	100	0.291	4.9	7.8	8.3	5.5	7.7
8	Test substance	32	0.337	-10	7.5	8.2	5.1	6.2
9	Test substance	10	0.320	-4.6	7.5	8.2	5.7	6.1

 *start and end of 3-hour aeration

Validity criteria fulfilled:

yes

Conclusions:

An ASRI 3hr EC50 value of 715 mg/l and an EC20 of 378 mg/l have been determined for the effects of the test substance on respiration inhibition of activated sludge.

Description of key information

An ASRI 3 hour EC₅₀ value of 715 mg/l and an EC₂₀ of 378 mg/l have been determined for the effects of the test substance on respiration inhibition of activated sludge.

Additional information

An ASRI 3 hour EC₅₀ value of 715 mg/l and an EC₂₀ of 378 mg/l (nominal test concentration) have been determined for the effects of the test substance on respiration inhibition of activated sludge, in compliance with OECD guideline 209.