Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 276-602-4 | CAS number: 72363-26-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 17 May 2016 to 19 May 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 016
- Report date:
- 2016
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 431 (In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method)
- Version / remarks:
- 28 July 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.40 (In Vitro Skin Corrosion: Transcutaneous Electrical Resistance Test (TER))
- Version / remarks:
- 30 May 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- UK GLP
Test material
- Reference substance name:
- 4-[(1-amino-9,10-dihydro-4-hydroxy-9,10-dioxo-2-anthryl)oxy]-N-(3-ethoxypropyl)benzenesulphonamide
- EC Number:
- 276-602-4
- EC Name:
- 4-[(1-amino-9,10-dihydro-4-hydroxy-9,10-dioxo-2-anthryl)oxy]-N-(3-ethoxypropyl)benzenesulphonamide
- Cas Number:
- 72363-26-9
- Molecular formula:
- C25H24N2O7S
- IUPAC Name:
- 4-[(1-amino-9,10-dihydro-4-hydroxy-9,10-dioxo-2-anthryl)oxy]-N-(3-ethoxypropyl)benzenesulphonamide
- Details on test material:
- Identification: FAT 40444/B
Lot: PCR92X140707(China)
Appearance: red powder
Constituent 1
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No. of test material: Sponsor Batch Number PCR92X140707 (China)
- Expiration date of the lot/batch:14 October 2019
- Purity: 95.4 %
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: 4 °C in the dark
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- other: target cells are epithelial, derived from human skin, and formed into a stratified, cornified epithelium
- Cell source:
- other: No specified as study used an EpiDerm™ Reconstructed Human Epidermis Model Kit from MatTek
- Source strain:
- other: Not applicable
- Details on animal used as source of test system:
- Not applicable
- Justification for test system used:
- Recognised in vitro test for corrosivity
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDerm™ Reconstructed Human Epidermis Model Kit
- Tissue batch number(s): 23337
- Delivery date: 17 May 2016
- Date of initiation of testing: 17 May 2016
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 °C
- Temperature of post-treatment incubation (if applicable):
REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: Rinsing was achieved by filling and emptying each tissue under a constant soft stream of DPBS to gently remove any residual test item.
- Observable damage in the tissue due to washing: None
- Modifications to validated SOP: none
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1.0 mg/mL
- Incubation time: 3 hours
- Spectrophotometer: Anthos 2001 microplate reader
- Wavelength: 562 nm
NUMBER OF REPLICATE TISSUES: 2
CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
- Fresh tissues
- Procedure used to prepare the killed tissues (if applicable):
- N. of replicates: 2
- Method of calculation used:
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION:
PREDICTION MODEL / DECISION CRITERIA (choose relevant statement)
- The test substance is considered to be non-corrosive to skin if [complete, e.g. the viability after 3 minutes exposure is greater than or equal to 50 % and the viability after 1 hour exposure is greater than or equal to 15 %.] - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 25 mg, used as supplied
NEGATIVE CONTROL
- Amount(s) applied (volume or weight): Sterile distilled water
- Concentration (if solution): not applicable
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 50µL
- Concentration (if solution): 8.0N Potassium hydroxide - Duration of treatment / exposure:
- 3 and 60 minutes
- Duration of post-treatment incubation (if applicable):
- 3 h
- Number of replicates:
- Duplicates
Results and discussion
In vitro
Resultsopen allclose all
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 3 minute exposure
- Value:
- 107.3
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: No indication of corrosion
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 60 Minute exposure
- Value:
- 98.7
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: No indication of corrosion
- Other effects / acceptance of results:
- Quality Criteria
The mean OD562 for the negative control treated tissues was 1.701 for the 3 Minute exposure period and 1.906 for the 60 Minute exposure period. The negative control acceptance criteria were therefore satisfied. The relative mean tissue viability for the positive control treated tissues was 3.4% relative to the negative control following the 60 Minute exposure period. The positive control acceptance criterion was therefore satisfied. In the range 20 to 100 % viability the Coefficient of Variation between the two tissue replicates of each treatment group did not exceed 30 %. The acceptance criterion was therefore satisfied.
Any other information on results incl. tables
The relative mean ciabilities for each treatment group were:
Exposure period | Percentage viability | ||
Negative control | Positive control | Test item | |
3 minutes | 100* | 3.5 | 107.3 |
60 minutes | 100* | 3.4 | 98.7 |
*The mean viability of the negative control tissues is set to 100 %.
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- FAT 40444/B was considered to be non-corrosive to the skin.
- Executive summary:
The purpose of this test was to evaluate the corrosivity potential of FAT 40444/B using the EpiDerm™ Human Skin Model after treatment periods of 3 and 60 minutes. Corrosion is directly related to cytotoxicity in the EpiDerm™ tissue. Cytotoxicity is determined by the reduction of MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide) to formazan by viable cells in the test item treated tissues relative to the corresponding negative control. The results are used to make a prediction of the corrosivity potential of the test item. The study was carried out according to OECD guideline 431 and EU method B.40. Duplicate tissues were treated with the test item for exposure periods of 3 and 60 minutes. The test item produced a sufficient amount of color that may interfere with the end point optical density readings. Therefore, additional tissues were incorporated into the testing for color correction purposes. These tissues were treated identically with the exception of not being placed onto MTT. Negative and positive control groups were treated for each exposure period. At the end of the exposure period the test item was rinsed from each tissue before each tissue was taken for MTT loading. After MTT loading each tissue was placed in 2 mL Isopropanol for MTT extraction. At the end of the formazan extraction period each well was mixed thoroughly and triplicate 200 µL samples were transferred to the appropriate wells of a pre-labeled 96 well plate. The optical density (OD) was measured at 562 nm (OD562). Data are presented in the form of percentage viability (MTT reduction in the test item treated tissues relative to negative control tissues). The relative mean viabilities for each treatment group were as follows:
Exposure period Percentage viability Negative control Positive control Test item 3 minutes 100* 3.5 107.3 60 minutes 100* 3.4 98.7 *The mean viability of the negative control tissues is set to 100 %.
The quality criteria required for acceptance of results in the test were satisfied. So based on the study results, FAT 40444/B was considered to be non-corrosive to the skin.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.