Reaction product of 3-[4-(2-aminoethylamino)-6-(4-sulfoanilino)-1,3,5-heterocycle-2-ylamino]benzensulfonic acid, ammonia water, sodium chloride and {mixture of [poly(1~4)chlorosulfonylphthalocyaninato-N29,N30,N31,N32]copper(II), [poly(1~3)chlorosulfonyl (tribenzo[b,g,l]pyrido[2,3-q]-5,10,15,20-tetraazaporphyrinato-N21,N22,N23,N24)]copper(II),[poly(1~2)chlorosulfonyl(dibenzol[b,g(or b,l)dipyrido[2,3(or 3,2)-l,q (or g,q)]-5,10,15,20-tetraazaporphyrinato-N21,N22,N23,N24)] copper(II) and [monochlorosulfonyl(benzo[b]tripyridol[2,3(or 3,2)-g,lq]-5,10,15,20- tetraazaporphyrinato- N21,N22,N23,N24)] copper(II)

Flammability

Administrative data

Endpoint:

flammable solids

Type of information:

experimental study

Adequacy of study:

key study

Study period:

29 January 2009 to 23 February 2009

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

other: Study conducted in compliance with agreed protocols, with no or minor deviations from standard test guidelines and/or minor methodological deficiencies, which do not affect the quality of relevant results.

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2009

Report date:

2009

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

EU Method A.10 (Flammability (Solids))

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Remarks:

Date of inspection: 19 August 2008; Date of signature: 29 January 2009

Test material

Reference

Name:

Unnamed

Type:

Constituent

Details on test material:

Sponsor's identification : H-CB sodium salt
Description : blue solid
Lot number : MB-2
Date received : 04 December 2008
Storage conditions : room temperature in the dark

Results and discussion

Flammable solids

Test procedure:

burning time (test type not further specified)

Remarks:

or specified in description of method (migrated information)

Remarks on result:

other: The pile failed to ignite during the two minutes that the Bunsen flame was applied.

Pyrophoric solids

Test procedure:

ignition time on contact with air

Remarks:

Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).

Remarks on result:

no ignition on contact with air (not further specified)

Remarks:

corresponding to 'no' in migrated source record.

Pyrophoric liquids

Test procedure:

ignition time on contact with air

Remarks:

Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).

Remarks on result:

no ignition on contact with air (not further specified)

Remarks:

corresponding to 'no' in migrated source record.

Any other information on results incl. tables

Preliminary screening test

The pile failed to ignite during the two minutes that the Bunsen flame was applied.

The result of the preliminary screening test obviated the need to perform the main test.

Moisture content

	Determination A	Determination B
a) Mass of loss bottle (g)	20.6950	19.8381
b) Mass of loss bottle and test material (g)	21.3764	20.8743
c) Mass of loss bottle and test material after  drying (g)	21.6511	20.8475
Moisture content (% w/w)	2.578	2.586
Mean moisture content (% w/w)	2.582

Applicant's summary and conclusion

Interpretation of results:

other: not highly flammable

Conclusions:

The test material has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.

Executive summary:

The flammability (solids) was determined by measuring the burning rate of test material prepared as a pile of set dimensions. Testing was conducted using Method A10 Flammability (Solids) of Council Regulation (EC) No 440/2008 of 30 May 2008.

The test material has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.