Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-534-4 | CAS number: 107-94-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: In vitro validated method and GLP.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 010
- Report date:
- 2010
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 435 (In Vitro Membrane Barrier Test Method for Skin Corrosion)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- 3-chloropropionic acid
- EC Number:
- 203-534-4
- EC Name:
- 3-chloropropionic acid
- Cas Number:
- 107-94-8
- Molecular formula:
- C3H5ClO2
- IUPAC Name:
- 3-chloropropanoic acid
- Details on test material:
- - Name of test material (as cited in study report): 3-Chloropropionic Acid (3-CPA)
- Physical state: solid, colorless
- Analytical purity: 98.8%
- Lot/batch No.: DEFM094405
- Storage condition of test material: at room temperature
Constituent 1
Test animals
- Species:
- other: in vitro
Test system
- Details on study design:
- Preparation of the Test Item:
500 mg of the test substance were evenly distributed directly atop the BIOBARRIER.
Controls:
- Negative control:
Citric Acid (10%) in Aqua dest. (AppliChem, Lot No.: 9H002452)
- Positive control:
Nitric Acid (69%); (AppliChem, Lot No.: 7K002481)
Dose groups:
1.- Negative control: 500 μL Citric Acid (10%) in Aqua dest.
2.- Positive control: 500 μL Nitric Acid (69%)
3.- Test item: Solid, 500 mg
The test was performed on a total of seven BIOBARRIERS per dose group (four BIOBARRIERS for the test item; one each for the positive and negative control and one as color control).
The test was carried out with the CORROSITEX TM Assay Kit (In vitro International; Irvine, CA 92614). Test kits are available for one, two or four test substances.
BIOBARRIER Preparation:
The preparation was completed as least 2 hours prior to running tests. The entire content of the BIOBARRIER diluent was added to the vial of BIOBARRIER matrix powder. The vial was heated to 68 ºC (± 1 ºC) in a water bath under smooth agitation. After complete dissolution (approximately 20 min.) the solution was allowed to sit for 5 min to allow any air bubbles to rise to the surface. 200 μL of the BIOBARRIER were pipetted into each membrane disc. The BIOBARRIERS were set on the tray and kept in the cold (2-8 ºC) for at least two hours.
Categorization Test:
This step established the category of cut-off times for the sample. 100 mg of the test item were added to the tubes labeled Tube A and Tube B. After shaking a color change was observed in either tube and color was matched to the corresponding color charts on the CORROSITEX TM Testing Protocol Poster. Test material having high acid/alkaline reserves are defined as Category 1 materials, while those with low acid/alkaline reserves are defined as Category 2 materials. If no color change had been observed in either tube, CONFIRM reagent was added to Tube B. After shaking, the resulting color was matched to the color chart on the CORROSITEX TM Testing Protocol Poster.
Classification Test:
This step determined the appropriate Packing Group for the test sample. The CDS (Chemical Detection System) vials were warmed to room temperature (17-25 ºC) before using. Vials 1-4 were utilized for sample replicate testing. The vial labeled (+) was utilized for a positive control sample, the vial labeled (-) for a negative control. The vial labeled C served as a CDS color control. One BIOBARRIER disc was added on top of the first vial. 500 mg of the test item were applied evenly on the top of the BIOBARRIER disc and starting time was recorded. This step was repeated for the remaining vials, staggering each start time by e.g. 10 seconds. The start time difference for each vial was subtracted from the final time to determine the net response time. As soon as a reaction had been observed, the time was recorded.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- other: other: COOROSITEX TM
- Value:
- 6.21
- Remarks on result:
- other:
- Remarks:
- Basis: mean (min). Remarks: Corrosive. (migrated information)
In vivo
- Irritant / corrosive response data:
- The test substance was compatible with the CORROSITEX TM Assay, as assessed in the qualification step. The chemical has been categorized to category1. A direct color change was observed in tube A and the category was read from the CORROSITEX TM color chart.
The mean time required to activate the CDS was 6.21 ± 0.24 min.
Any other information on results incl. tables
Classification Test
|
CORROSITEX TM Time (min) |
Color change |
Consistency change |
Replicate 1 |
6.25 |
yes |
no |
Replicate 2 |
5.83 |
yes |
no |
Replicate 3 |
6.25 |
yes |
no |
Replicate 4 |
6.50 |
yes |
no |
Mean± SD |
± 0.24 |
yes |
no |
|
|
|
|
Positive control |
1.33 |
yes |
no |
Negative control |
108.00 |
yes |
no |
Applicant's summary and conclusion
- Interpretation of results:
- Category 1B (corrosive)
- Remarks:
- Migrated information Criteria used for interpretation of results: EU
- Conclusions:
- In this study under the given conditions the test substance showed corrosive effects. The test substance is classified as "CORROSIVE", subcategory 1B according to the UN GHS, as the mean time to activate the CDS was >3 - 60 min (6.21 ± 0.24 min) (category 1). The test substance is therefore assigned to Packing Group 2 and to EU Risk-Phrase (R34).
- Executive summary:
In the present study the skin corrosive potential of 3-Chloropropionic Acid (3-CPA) was analysed. Corrosive chemicals are, dependent on their grade of corrosivity, able to break through the bio-barrier membrane employed in the "In Vitro Membrane Barrier Test (CORROSITEX TM Assay)" and subsequently activate the underlying CDS. Hence, the time necessary to activate the CDS allows to distinguish between corrosive and non-corrosive test substances. Additionally, it is possible to assess the dermal corrosion hazard potential including the subcategorisation of corrosive substances as permitted in the UN GHS (corrosive subcategory 1A, 1B and 1C) and the assignment to EU Risk Phrases (R35, R34, no label).
Hereby, the test item was placed atop of the bio-barrier membrane. CDS activation was assessed as a color change or a change in consistency. The time required to activate the CDS was matched with given thresholds.
In this study under the given conditions the test substance showed corrosive effects. The test substance is classified as "CORROSIVE", subcategory 1B according to the UN GHS, as the mean time to activate the CDS was >3 - 60 min (6.21 ± 0.24 min) (category 1). The test substance is therefore assigned to Packing Group 2 and to EU Risk-Phrase (R34).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.