Registration Dossier

Environmental fate & pathways

Biodegradation in water: screening tests

Administrative data

Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
key study
Study period:
October 10 - November 8, 2007
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Study has been performed according to OECD and EC guidelines and according to GLP principles.

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2008
Report Date:
2008

Materials and methods

Test guidelineopen allclose all
Qualifier:
according to
Guideline:
OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
Deviations:
no
Qualifier:
according to
Guideline:
EU Method C.4-C (Determination of the "Ready" Biodegradability - Carbon Dioxide Evolution Test)
Deviations:
no
Qualifier:
according to
Guideline:
ISO DIS 9439 (Ultimate Aerobic Biodegradability - Method by Analysis of Released Carbon Dioxide)
Deviations:
no
GLP compliance:
yes (incl. certificate)

Test material

Reference
Name:
Unnamed
Type:
Constituent
Details on test material:
- Name of test material (as cited in study report): Corsair Clear #34
- Substance type: Clear white lumpy solid
- Physical state: Solid
- Stability under test conditions: Stable
- Storage condition of test material: At room temperature in the dark

Study design

Oxygen conditions:
aerobic
Inoculum or test system:
activated sludge, domestic, non-adapted
Details on inoculum:
- Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure): obtained from a municipal sewage treatment plant: 'Waterschap de Maaskant', 's-Hertogenbosch, the Netherlands, receiving predominantly domestic sewage.
- Preparation of inoculum for exposure: Before use, the sludge was allowed to settle (35 minutes) and the liquid was decanted for use as inoculum at the amount of 10 ml/l of mineral medium.
- Pretreatment: no special pretreatment
- Concentration of sludge: 10 ml supernatant/l of mineral medium.
- Initial cell/biomass concentration: not determined
- Water filtered: no
Duration of test (contact time):
29 d
Initial test substance concentrationopen allclose all
Initial conc.:
31 other: mg / 2 L
Based on:
test mat.
Initial conc.:
12 mg/L
Based on:
other: Total Organic Carbon (TOC)
Parameter followed for biodegradation estimation
Parameter followed for biodegradation estimation:
CO2 evolution
Details on study design:
TEST CONDITIONS
- Composition of medium: 1 litre mineral medium contains: 10 ml of solution (A), 1 ml of
solutions (B) to (D) and Milli-RO water.
Stock solutions of mineral components:
A) 8.50 g KH2PO4; 21.75 g K2HPO4; 67.20 g Na2HPO4.12H2O; 0.50 g NH4Cl; dissolved in Milli-Q water and made up to 1 litre, pH 7.4 ± 0.2
B) 22.50 g MgSO4.7H2O dissolved in Milli-Q water and made up to 1 litre.
C) 36.40 g CaCl2.2H2O dissolved in Milli-Q water and made up to 1 litre.
D) 0.25 g FeCl3.6H2O dissolved in Milli-Q water and made up to 1 litre.
- Test temperature: between 21.5 and 22.0°C
- pH: Just before the start of the test: 7.5-7.6. On day 29: 7.7-8.0
- pH adjusted: no
- Aeration of dilution water: not before the test, the test is aerated continuously
- Suspended solids concentration: The concentration of suspended solids was 4.1 g/l in the concentrated sludge (information obtained from the municipal sewage treatment plant).
- Continuous darkness: yes

TEST SYSTEM
- Culturing apparatus: Test vessels: 2 litre all-glass brown coloured bottles
- Number of culture flasks/concentration: Test suspension: containing test substance and inoculum (2 bottles).
Inoculum blank: containing only inoculum (2 bottles)
Positive control: containing reference substance and inoculum (1 bottle)
Toxicity control: containing test substance, reference substance and inoculum (1 bottle).
- Method used to create aerobic conditions: A mixture of oxygen (21%) and nitrogen (79%) was passed through a bottle, containing 0.5 - 1 litre 0.0125 M Ba(OH)2 solution to trap CO2 which might be present in small amounts. The synthetic air was sparged through the scrubbing solutions at a rate of approximately 1-2 bubbles per second (ca. 30-100 ml/min).
- Test performed in open system: yes
- Details of trap for CO2 and volatile organics if used: The CO2 produced in each test bottle reacted with the barium hydroxide in the gas scrubbing bottle and precipitated out as barium carbonate. The amount of CO2 produced was determined by titrating the remaining Ba(OH)2 with 0.05 M standardized HCl (1:20 dilution from 1 M HCl (Titrisol® ampul), Merck, Darmstadt, Germany). Titrations were made every second or third day during the
first 10 days, and thereafter at least every fifth day until the 29th day. Each time the CO2-absorber nearest to the test bottle was removed for titration; each of the remaining two absorbers was moved one position in the direction of the test bottle. A new CO2-absorber was placed at the far end of the series. Phenolphthalein (1% solution in ethanol, Merck, Darmstadt, Germany) was used as pH-indicator. On the 28th day, the pH of the test
suspensions was measured and 1 ml of concentrated HCl (37%, Merck, Darmstadt, Germany) was added to each bottle. The bottles were aerated overnight to drive off CO2 present in the test suspension. The final titration was made on day 29.

SAMPLING
- Sampling frequency: titrations were made on days: 2, 5, 7, 9, 14, 19, 23, 27 and 29.
- Sampling method: titration of whole volume of CO2-absorber

CONTROL AND BLANK SYSTEM
- Inoculum blank: yes
- Abiotic sterile control: no
- Toxicity control: yes
Reference substance
Reference substance:
acetic acid, sodium salt

Results and discussion

% Degradation
Parameter:
% degradation (CO2 evolution)
Value:
1 - 2
Sampling time:
29 d

BOD5 / COD results

Results with reference substance:
In the toxicity control more than 25% degradation occurred within 14 days (30%, based on ThCO2). Therefore, the test substance was assumed not to inhibit microbial activity.

Applicant's summary and conclusion

Validity criteria fulfilled:
yes
Interpretation of results:
under test conditions no biodegradation observed
Conclusions:
According to the EU criteria and based on the modified Sturm test presently performed, Corsair Clear #34 would be regarded as not readily biodegradable. However, the negative result of the available biodegradation study may be due to the fact that the tested concentration was far above the maximum water solubility. Thus, in view of lack of the optimal contact between the test substance and the medium in the present Modified Sturm test, no definitive conclusions can be drawn with respect to biodegradability of the test substance.