Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 500-133-9 | CAS number: 56641-05-5 1 - 2.5 moles ethoxylated
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: short summary of results
- Qualifier:
- according to guideline
- Guideline:
- other: ASTM D891 test method: Test Method A, specific gravity, apparent, by means of a hydrometer
- Principles of method if other than guideline:
- The density of the liquid resin was determined by Hydrometer according to ASTM D891 test method.
This test method covers the specific gravity of the sample by immersing a calibrated hydrometer in the sample at the test temperature.The displacement of the hydrometer occurs from the function of the specific gravity of the sample, that is read on the hydrometer scale at the level of the meniscus of the sample. For reliable data, eyes must be horizontal to the plane of the liquid surface when reading the hydrometer scale. The measurements were conducted at 25 °C. - GLP compliance:
- not specified
- Type of method:
- other: Hydrometer
- Specific details on test material used for the study:
- Miramer M142 = acrylated resin mainly based on Phenol, ethoxylated, esters with acrylic acid (CAS Number: 56641-05-5).
Mw = 236g/mol (C13H16O4) - Dynamic viscosity of test material:
- 23.5 mPAs at 25 degree celcius
- Key result
- Type:
- density
- Density:
- 1.11 g/cm³
- Temp.:
- 25 °C
- Conclusions:
- The density of Phenol, ethoxylated, esters with acrylic acid (Miramer M142) was determined by Hydrometer according to ASTM D891 test method.
The density was determined to be 1.11 g/cm3 at 25 oC. - Executive summary:
The density of Phenol, ethoxylated, esters with acrylic acid (Miramer M142) was determined by Hydrometer according to ASTM D891 test method.
The density was determined to be 1.11 g/cm3 at 25oC.
Reference
Sample# |
Density |
Temperature |
||
|
g/cm3 |
°C |
||
|
MIRAMER M142 (Lot#160420H27) |
|
1.11 |
25 |
|
||||
Description of key information
The density of Phenol, ethoxylated, esters with acrylic acid (Miramer M142) was determined by Hydrometer according to ASTM D891 test method.
The density was determined to be 1.11 g/cm3 at 25oC.
Key value for chemical safety assessment
Additional information
The density was determined to be 1.11 g/cm3 at 25oC.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
