Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
From July 14, 2010 to July 29, 2011
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: see 'Remark'
Remarks:
Study conducted in compliance with agreed protocols, with no or minor deviations from standard test guidelines and/or minor methodological deficiencies, which do not affect the quality of the relevant results. The study report was conclusive, done to a valid guideline and the study was conducted under GLP conditions.
Qualifier:
according to guideline
Guideline:
EU Method A.3 (Relative Density)
Qualifier:
according to guideline
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
GLP compliance:
yes (incl. QA statement)
Type of method:
air comparison pycnometer (for solids)
Type:
relative density
Density:
1.286
Temp.:
20 °C

Results and Discussions

The test was performed at a temperature of 20.0 °C ± 0.1 °C. The calibration procedure was performed in triplicate. The determination of the relative density of the test item was performed with two independent test item samples each measured in triplicate.

The density of the test item MEXORYL SBU was determined to be 1.286 g/cm³ (= 1.286·10³ kg/m³) at 20.0 °C ± 0.1 °C using a gas comparison pycnometer.

Conclusions:
The relative density of MEXORYL SBU was determined to be = 1.286.
Executive summary:

The purpose of the study was to determine the relative density of the test item at a specific temperature by means of a gas comparison pycnometer. The density of the test item MEXORYL SBU was determined to be 1.286 g/cm³ (= 1.286 · 10³ kg/m³) at 20.0 °C ± 0.1 °C using a gas comparison pycnometer. The relative density of MEXORYL SBU was determined to be 1.286.

Description of key information

The density of the test item MEXORYL SBU was determined to be 1.286 g/cm³ (= 1.286 · 10³ kg/m³) at 20.0 °C ± 0.1 °C using a gas comparison pycnometer. The relative density of MEXORYL SBU was determined to be 1.286

Key value for chemical safety assessment

Relative density at 20C:
1.286

Additional information