Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Genetic toxicity: in vitro
Administrative data
- Endpoint:
- in vitro gene mutation study in bacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 021
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 471 (Bacterial Reverse Mutation Assay)
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- bacterial reverse mutation assay
Test material
- Reference substance name:
- Tributyl(ethyl)phosphonium diphenyl phosphate
- Cas Number:
- 2409816-82-4
- Molecular formula:
- C26H42O4P2
- IUPAC Name:
- Tributyl(ethyl)phosphonium diphenyl phosphate
- Test material form:
- liquid
Constituent 1
Method
- Target gene:
- Salmonella typhimurium (TA98, TA100, TA102, TA1535 and TA1537)
Species / strain
- Species / strain / cell type:
- S. typhimurium TA 1535, TA 1537, TA 98, TA 100 and TA 102
- Details on mammalian cell type (if applicable):
- All Salmonella typhimurium strains were obtained from Trinova BioChem GmbH (batch: TA98: 5508D, TA100: 5526D, TA102: 5524D, TA1535: 5504D, TA1537:5530D) and were stored as lyophilizates in the refrigerator at 2 – 8 °C.
On the day before the start of each experiment, a nutrient broth (Oxoid nutrient broth no. 2) was inoculated with one lyophilizate per strain at 3:30 pm.
These overnight cultures were placed in the heating chamber at 37 ± 1 °C for 16.5 hours.
For the last two hours the overnight cultures were shaken on an orbital shaker (150 rpm) at 37 ± 1 °C.
Afterwards, the overnight cultures were ready for use in the experiment.
During the test, the overnight cultures were stored at room temperature (20 ± 5 °C) to pre-vent changes in the titre.
- Metabolic activation:
- with and without
- Metabolic activation system:
- The test was performed in two valid experiments in the presence and absence of metabolic activation, with +S9 standing for the presence of a metabolic activation, and -S9 standing for absence of metabolic activation.
Experiment 1:
In the first experiment, the test item (dissolved in demineralized water, demin. water) was tested up to concentrations of 5 µL/plate in the absence and presence of S9 mix in the strains TA98, TA100, TA102, TA1535 and TA1537 using the plate incorporation method.
The test item showed no precipitates on the plates at any of the concentrations and no signs of cytotoxicity could be observed in the presence and the absence of metabolic acti-vation.
The results of this experiment showed that none of the tested concentrations induced a relevant or concentration-related increase in the number of revertants in all tested strains, in the presence and the absence of metabolic activation.
Experiment 2:
Based on the results of exp. 1,the test item was tested up to concentrations of 5 µL/plate in the presence and absence of S9 mix in all bacteria strains using the pre-incubation method.
The test item showed no precipitates on the plates at any of the concentrations and no signs of cytotoxicity could be observed in the presence and the absence of metabolic acti-vation.
The results of this experiment showed that none of the tested concentrations induced a relevant or concentration-related increase in the number of revertants in all tested strains, in the presence and the absence of metabolic activation. - Test concentrations with justification for top dose:
- It is not specificed in the final report.
- Vehicle / solvent:
- Demin. water was chosen as vehicle, because the test item was sufficiently soluble, and this solvent does not have any effects on the viability of the bacteria or the number of spontaneous revertants in the tested concentrations.
On the day of the start of each experiment, a stock solution containing 50 mL/L of the test item in demin. water was prepared.
The stock solution was used to prepare the geometric series of the concentrations to be tested.
The following nominal test item concentrations were prepared for experiment 1:
5, 1.5, 0.5, 0.15 and 0.05 µL/plate.
The following nominal test item concentrations were prepared for experiment 2:
5, 2.5, 1.25, 0.63, 0.313 and 0.156 µL/plate.
Controls
- Negative solvent / vehicle controls:
- yes
- Positive controls:
- yes
- Positive control substance:
- sodium azide
- benzo(a)pyrene
- mitomycin C
- other: 4-Nitro-1,2-pheny-lene diamine, 2-Amino-anthracene
- Details on test system and experimental conditions:
- Per bacteria strain and concentration, three plates with (+S9) and three plates without me-tabolic activation (-S9) were used.
For the top agar 100 mL agar basis was melted in a microwave oven, 10 mL of the histi-dine-biotin-solution 0.5 mM was added, then the mixture was placed in the water bath at 43 ± 1 °C.
Experiment 1
Tested strains: TA98, TA100, TA102, TA1535, TA1537
Test item concentrations: 5, 1.5, 0.5, 0.15, 0.05 µL/plate
Incubation time: 48 h
Incubation temperature: 37 ± 1 °C
Method: plate incorporation method
Experiment 2
Tested strains: TA98, TA100, TA102, TA1535, TA1537
Test item concentrations: 5, 2.5, 1.25, 0.63, 0.313, 0.156 µL/plate
Incubation time: 48 h
Incubation temperature: 37 ± 1 °C
Method: pre-incubation method
Plate incorporation method:
The following materials were gently vortexedin a test tube and poured onto the selective agar plates:
1. 100 µL test solution at each dose level, solvent (negative control) or reference muta-gen solution (positive control).
2. 500 µL S9-mix (for test with metabolic activation) or phosphate buffer (for test without metabolic activation).
3. 100 µL bacteria suspension (test system, culture of the strains)
4. 2000 µL overlay agar (top agar)
The plates were closed and left to solidify for a few minutes, then inverted and placed in the dark incubator at 37 ± 1 °C.
Pre-incubation method
The following materials were gently vortexed in a test tube and incubated at 37 ± 1 °C for 20 minutes:
1. 100 µL test solution at each dose level, solvent (negative control) or reference muta-gen solution (positive control).
2. 500 µL S9-mix (for test with metabolic activation) or phosphate buffer (for test without metabolic activation).
3. 100 µL bacteria suspension (test system, culture of the strains)
After the pre-incubation for 20 minutes, 2000 µL top agar was added and the tube was gently slewed. The mixture was poured onto the selective agar plate.
The plates were closed and left to solidify for a few minutes, then inverted and placed in the incubator at 37 ± 1 °C. - Evaluation criteria:
- Five different analysable concentrations were used for the evaluation of the mutagenic potential of the test item.
The colonies were counted visually and the numbers were recorded. A validated spread-sheet software (Microsoft Excel®) was used to calculate mean values and standard devia-tions of each treatment, negative control and positive control.
The mean values and standard deviations of each threefold determination were calculated as well as the increase factor of revertant induction (mean revertants divided by mean spontaneous revertants) of the test item solutions and the positive controls. Additionally, the absolute number of revertants (mean revertants minus mean spontaneous revertants) is given.
A result is considered as clearly positive if all following criteria are fulfilled:
• A concentration-related increase, in revertants
• a clear biological relevant increase in at least one concentration compared to the con-current solvent control
• at least one concentration with an increase above the distribution of historical solvent control data (mean ± 3 SD).
A biologically relevant increase is described as follows:
• if in the bacteria strains TA98, TA100, TA102the number of revertants is at least twice as high than the reversion rate of the negative controls (increase factor of at least 2.0)
• if in the bacteria strainsTA1535 and TA1537 the number of revertants is at least three times higher than the reversion rate of the negative controls (increase factor of at least 3.0).
A test result is considered as clearly negative, if it does not meet the criteria above.
Results and discussion
Test resultsopen allclose all
- Key result
- Species / strain:
- S. typhimurium TA 98
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not examined
- True negative controls validity:
- not examined
- Positive controls validity:
- valid
- Key result
- Species / strain:
- S. typhimurium TA 100
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not examined
- True negative controls validity:
- not examined
- Positive controls validity:
- valid
- Key result
- Species / strain:
- S. typhimurium TA 102
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not examined
- True negative controls validity:
- not examined
- Positive controls validity:
- valid
- Key result
- Species / strain:
- S. typhimurium TA 1535
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not examined
- True negative controls validity:
- not examined
- Positive controls validity:
- valid
- Key result
- Species / strain:
- S. typhimurium TA 1537
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not examined
- True negative controls validity:
- not examined
- Positive controls validity:
- valid
- Additional information on results:
- All strains met the criterion of at least 109 bacteria/mL (correlating to 100 colonies/plate after dilution), and no inconsistencies were found in the sterility control. All determined values for the spontaneous revertants of the vehicle and negative controls were in the normal range of the test laboratory (mean ± 3 standard deviations). All positive controls (diagnostic mutagens) showed mutagenic effects with and without metabolic activation and all were within the historical control data ranges.
In exp. 1, the test item showed no precipitateson the plates in all tested concentrations.
The bacterial background lawn was visible and not affected. The number of revertant colonies was not reduced. Thus, no signs of toxicity towards the bacteria strains could be observed.
No relevant or concentration-related increase of the number of revertant colonies in the treatments with and without metabolic activation could be observed.
To verify this result, a further experiment with adapted conditions (pre-incubation method) was performed (exp. 2).
The mean revertant values of experiment 1 are shown in Table 8.1 a.
In exp. 2, the test item showed no precipitateson the plates in all tested concentrations.
The bacterial background lawn was visible and not affected. The number of revertant colonies was not reduced. Thus, no signs of toxicity towards the bacteria strains could be observed.
No relevant or concentration-related increase of the number of revertant colonies in the treatments with and without metabolic activation could be observed.
The mean revertant values of experiment 2 are shown in Table 8.2 a.
Any other information on results incl. tables
Table 8.1‑a Mean Revertants Experiment 1
Strain | TA98 | TA100 | TA102 | TA1535 | TA1537 | ||||||
Induction | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | |
Demin. water | Mean | 11 | 18 | 54 | 54 | 169 | 175 | 7 | 6 | 3 | 4 |
sd | 1.5 | 2.0 | 3.6 | 6.2 | 8.3 | 12.9 | 1.5 | 0.6 | 0.6 | 0.6 | |
DMSO | Mean | 13 | 16 | 46 | 45 | 160 | 160 | 8 | 9 | 4 | 5 |
sd | 1.2 | 1.0 | 1.2 | 1.5 | 6.9 | 10.6 | 1.2 | 1.2 | 0.6 | 0.6 | |
Positive | Mean | 456 | 128 | 205 | 1021 | 749 | 1115 | 132 | 167 | 62 | 102 |
sd | 52.5 | 11.7 | 16.7 | 92.7 | 53.3 | 85.5 | 10.6 | 28.1 | 4.2 | 8.7 | |
f(I) | 35.08 | 8.00 | 3.80 | 22.69 | 4.43 | 6.97 | 18.86 | 18.56 | 15.50 | 20.40 | |
5µL/plate | Mean | 14 | 14 | 50 | 55 | 167 | 155 | 8 | 8 | 4 | 5 |
sd | 3.8 | 2.1 | 1.0 | 1.7 | 12.2 | 14.0 | 0.6 | 0.0 | 0.6 | 0.6 | |
f(I) | 1.27 | 0.78 | 0.93 | 1.02 | 0.99 | 0.89 | 1.14 | 1.33 | 1.33 | 1.25 | |
1.5µL/plate | Mean | 13 | 15 | 50 | 51 | 164 | 165 | 7 | 7 | 4 | 4 |
sd | 2.0 | 2.1 | 2.3 | 4.0 | 10.6 | 6.1 | 1.5 | 1.0 | 1.2 | 1.0 | |
f(I) | 1.18 | 0.83 | 0.93 | 0.94 | 0.97 | 0.94 | 1.00 | 1.17 | 1.33 | 1.00 | |
0.5 µL/plate | Mean | 12 | 15 | 51 | 53 | 155 | 153 | 7 | 7 | 4 | 5 |
sd | 1.5 | 3.1 | 2.5 | 2.0 | 10.1 | 10.1 | 1.0 | 0.6 | 0.6 | 1.2 | |
f(I) | 1.09 | 0.83 | 0.94 | 0.98 | 0.92 | 0.87 | 1.00 | 1.17 | 1.33 | 1.25 | |
0.15 µL/plate | Mean | 14 | 16 | 49 | 49 | 159 | 159 | 8 | 9 | 3 | 4 |
sd | 3.8 | 2.3 | 4.5 | 4.9 | 10.1 | 8.3 | 1.5 | 1.2 | 0.6 | 0.6 | |
f(I) | 1.27 | 0.89 | 0.91 | 0.91 | 0.94 | 0.91 | 1.14 | 1.50 | 1.00 | 1.00 | |
0.05 µL/plate | Mean | 14 | 17 | 53 | 55 | 157 | 149 | 9 | 7 | 5 | 4 |
sd | 4.0 | 3.2 | 3.5 | 3.5 | 12.2 | 10.1 | 0.6 | 0.6 | 0.6 | 1.0 | |
f(I) | 1.27 | 0.94 | 0.98 | 1.02 | 0.93 | 0.85 | 1.29 | 1.17 | 1.67 | 1.00 |
sd = standard deviation ±
* Different positive controls were used, see chapter 6.2.4, page 13
f(I) = increase factor, calculation see chapter 7.4, page 20
bold marked values = relevant increase in the number of revertants
Table 8.2‑a Mean Revertants Experiment 2
Strain | TA98 | TA100 | TA102 | TA1535 | TA1537 | ||||||
Induction | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | -S9 | +S9 | |
Demin. water | Mean | 15 | 21 | 68 | 74 | 159 | 157 | 9 | 10 | 4 | 5 |
sd | 1.5 | 2.5 | 3.5 | 6.0 | 10.1 | 10.1 | 1.0 | 1.0 | 1.0 | 0.6 | |
DMSO | Mean | 18 | 25 | 61 | 69 | 163 | 159 | 8 | 9 | 4 | 4 |
sd | 2.0 | 3.5 | 4.6 | 5.7 | 8.3 | 6.1 | 2.5 | 1.5 | 1.0 | 0.0 | |
Positive | Mean | 589 | 124 | 499 | 984 | 500 | 596 | 293 | 101 | 60 | 285 |
sd | 39.5 | 8.0 | 12.2 | 68.4 | 21.2 | 17.4 | 24.4 | 6.1 | 10.6 | 9.2 | |
f(I) | 32.72 | 4.96 | 7.34 | 14.26 | 3.14 | 3.75 | 32.56 | 11.22 | 15.00 | 71.25 | |
5µL/plate | Mean | 11 | 19 | 59 | 76 | 163 | 159 | 6 | 5 | 5 | 6 |
sd | 1.5 | 1.5 | 4.9 | 4.5 | 6.1 | 16.2 | 0.0 | 0.6 | 2.9 | 0.0 | |
f(I) | 0.73 | 0.90 | 0.87 | 1.03 | 1.03 | 1.01 | 0.67 | 0.50 | 1.25 | 1.20 | |
2.5µL/plate | Mean | 17 | 21 | 63 | 75 | 161 | 157 | 7 | 7 | 6 | 6 |
sd | 0.0 | 2.6 | 5.9 | 1.5 | 12.2 | 10.1 | 2.1 | 1.0 | 1.5 | 1.2 | |
f(I) | 1.13 | 1.00 | 0.93 | 1.01 | 1.01 | 1.00 | 0.78 | 0.70 | 1.50 | 1.20 | |
1.25 µL/plate | Mean | 19 | 20 | 73 | 71 | 163 | 169 | 9 | 8 | 4 | 6 |
sd | 2.1 | 2.6 | 5.9 | 6.0 | 14.0 | 12.2 | 2.6 | 2.1 | 0.6 | 1.0 | |
f(I) | 1.27 | 0.95 | 1.07 | 0.96 | 1.03 | 1.08 | 1.00 | 0.80 | 1.00 | 1.20 | |
0.63 µL/plate | Mean | 20 | 21 | 70 | 67 | 156 | 165 | 8 | 9 | 4 | 5 |
sd | 2.5 | 3.1 | 6.0 | 6.7 | 6.9 | 12.2 | 1.5 | 2.1 | 1.0 | 1.5 | |
f(I) | 1.33 | 1.00 | 1.03 | 0.91 | 0.98 | 1.05 | 0.89 | 0.90 | 1.00 | 1.00 | |
0.313 µL/plate | Mean | 18 | 25 | 68 | 68 | 169 | 159 | 9 | 8 | 5 | 5 |
sd | 2.1 | 1.5 | 2.5 | 5.7 | 4.6 | 12.2 | 1.7 | 1.2 | 2.3 | 0.6 | |
f(I) | 1.20 | 1.19 | 1.00 | 0.92 | 1.06 | 1.01 | 1.00 | 0.80 | 1.25 | 1.00 | |
0.156 µL/plate | Mean | 19 | 21 | 64 | 59 | 155 | 163 | 8 | 8 | 5 | 4 |
sd | 3.5 | 5.0 | 3.1 | 2.1 | 12.2 | 8.3 | 1.2 | 2.0 | 1.0 | 1.5 | |
f(I) | 1.27 | 1.00 | 0.94 | 0.80 | 0.97 | 1.04 | 0.89 | 0.80 | 1.25 | 0.80 |
sd = standard deviation ±
* Different positive controls were used, see chapter 6.2.4, page 13
f(I) = increase factor, calculation see chapter 7.4, page 20
bold marked values = relevant increase in the number of revertants
Applicant's summary and conclusion
- Conclusions:
- Tributyl(ethyl)phosphonium diphenyl phosphate is not mutagenic in the Salmonella typhimurium strains TA98, TA100, TA102, TA1535 and TA1537 in the presence and absence of metabolic activation under the experimental conditions in this study.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.