Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 230-794-6 | CAS number: 7321-53-1
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
EYES: Irrigate copiously with clean, fresh water for at least 15 minutes. Verify the presence of contact lenses and in that case remove them.
Seek medical advice.
SKIN:Remove all contaminated clothing. Immediately wash with plenty of water and soap. Wash contaminated clothing separately before using them again.
INHALATION: Remove to open air. If breathing is irregular or stopped, obtain immediate medical attention.
INGESTION: do not induce vomit. Obtain immediate medical attention. Give nothing by mouth to an unconscious person. If ingested, this product may be aspirated into the lungs and cause chemical pneumonitis
Seek medical advice.
SKIN:Remove all contaminated clothing. Immediately wash with plenty of water and soap. Wash contaminated clothing separately before using them again.
INHALATION: Remove to open air. If breathing is irregular or stopped, obtain immediate medical attention.
INGESTION: do not induce vomit. Obtain immediate medical attention. Give nothing by mouth to an unconscious person. If ingested, this product may be aspirated into the lungs and cause chemical pneumonitis
Fire-fighting measures
1. Extinguishing media
SUITABLE EXTINGUISHING EQUIPMENT
Extinguishing substances are: carbon dioxide, foam and chemical powder.
UNSUITABLE EXTINGUISHING EQUIPMENT
Do not use jets of water.
Water is not effective for putting out fires.
2. Special hazards arising from the substance or mixture
Containers exposed to fire may break with leakage of fluid, pay attention. Do not breathe combustion products.
3. Advice for firefighters
GENERAL INFORMATION
Always wear full fire prevention gear.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).
SUITABLE EXTINGUISHING EQUIPMENT
Extinguishing substances are: carbon dioxide, foam and chemical powder.
UNSUITABLE EXTINGUISHING EQUIPMENT
Do not use jets of water.
Water is not effective for putting out fires.
2. Special hazards arising from the substance or mixture
Containers exposed to fire may break with leakage of fluid, pay attention. Do not breathe combustion products.
3. Advice for firefighters
GENERAL INFORMATION
Always wear full fire prevention gear.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).
Accidental release measures
1. Personal precautions, protective equipment and emergency procedures
Block the leakage if there is no hazard.
Wear suitable protective equipment to prevent any contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
2. Environmental precautions
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
3. Methods and material for containment and cleaning up
Collect the leaked product into a suitable container:steel, glass or plastic container. Absorb the remainder with inert absorbent material.
Make sure the leakage site is well aired.
Block the leakage if there is no hazard.
Wear suitable protective equipment to prevent any contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
2. Environmental precautions
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
3. Methods and material for containment and cleaning up
Collect the leaked product into a suitable container:steel, glass or plastic container. Absorb the remainder with inert absorbent material.
Make sure the leakage site is well aired.
Handling and storage
1. Precautions for safe handling
Before handling the product, consult all the other sections of this material safety data sheet. Product to be handled only by properly trained workers. Avoid contact with the skin and the eyes. Good local and general ventilation should be guaranteed in working areas. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
2. Conditions for safe storage, including any incompatibilities
Store product in the original container in a ventilated and dry place, far away from heat sources. Keep containers away from any incompatible materials.
Before handling the product, consult all the other sections of this material safety data sheet. Product to be handled only by properly trained workers. Avoid contact with the skin and the eyes. Good local and general ventilation should be guaranteed in working areas. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
2. Conditions for safe storage, including any incompatibilities
Store product in the original container in a ventilated and dry place, far away from heat sources. Keep containers away from any incompatible materials.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
As the use of adequate technical equipment must always take priority over personal protection equipment, make sure that the workplace is well aired through effective local aspiration or bad air vent. Personal protection equipment must comply with the rules in force indicated below.
HAND PROTECTION
Protect hands with category II (ref. Directive 89/686/EEC and standard EN 374) work gloves, such as those in PVC, neoprene, nitryl or equivalent. The following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to preparations should be checked before use, as it can be unpredictable. Gloves’ limit depends on the duration of exposure.
EYE PROTECTION
Wear protective goggles (ref. standard EN 166).
RESPIRATORY PROTECTION
If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company’s prevention and protection service is exceeded, wear a mask or an half-mask with an A (organic vapours) and P (dusts and mists) filter or universal filter, the class of which should be chosen according to the limit concentration of use (ref. standard ΕΝ 141).
The use of respiratory tract protection equipment, such as masks like that indicated above, is necessary to reduce worker exposure in the absence of technical measures. The protection provided by masks is in any case limited.
ENVIRONMENTAL EXPOSURE CONTROLS
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
HAND PROTECTION
Protect hands with category II (ref. Directive 89/686/EEC and standard EN 374) work gloves, such as those in PVC, neoprene, nitryl or equivalent. The following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to preparations should be checked before use, as it can be unpredictable. Gloves’ limit depends on the duration of exposure.
EYE PROTECTION
Wear protective goggles (ref. standard EN 166).
RESPIRATORY PROTECTION
If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company’s prevention and protection service is exceeded, wear a mask or an half-mask with an A (organic vapours) and P (dusts and mists) filter or universal filter, the class of which should be chosen according to the limit concentration of use (ref. standard ΕΝ 141).
The use of respiratory tract protection equipment, such as masks like that indicated above, is necessary to reduce worker exposure in the absence of technical measures. The protection provided by masks is in any case limited.
ENVIRONMENTAL EXPOSURE CONTROLS
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Stability and reactivity
1. Reactivity
There are no particular risks of reaction with other substances in normal conditions of use.
2. Chemical stability
The product is stable in normal conditions of use and storage.
3. Possibility of hazardous reactions
No hazardous reactions are foreseeable in normal conditions of use and storage.
4. Conditions to avoid
None in particular. However the usual precautions used for chemical products should be respected.
5. Incompatible materials
Avoid contact with strong oxidizing agents. The addition of acids or bases could damage the product.
6. Hazardous decomposition products
In the event of thermal decomposition or fire, gases and vapours that are potentially dangerous to health may be released.
There are no particular risks of reaction with other substances in normal conditions of use.
2. Chemical stability
The product is stable in normal conditions of use and storage.
3. Possibility of hazardous reactions
No hazardous reactions are foreseeable in normal conditions of use and storage.
4. Conditions to avoid
None in particular. However the usual precautions used for chemical products should be respected.
5. Incompatible materials
Avoid contact with strong oxidizing agents. The addition of acids or bases could damage the product.
6. Hazardous decomposition products
In the event of thermal decomposition or fire, gases and vapours that are potentially dangerous to health may be released.
Disposal considerations
Waste treatment methods
Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.
Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
