Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 233-047-2 | CAS number: 10025-91-9
Guidance on Safe Use
Administrative data
First-aid measures
General information: Remove contaminated clothing immediately and dispose of safely. In case of persisting adverse effects, consult a physician.
After inhalation: Ensure supply of fresh air. Remove affected persons from dangerous area by observing suitable respiratory protection measures. Summon a doctor immediately.
After skin contact: Wash off immediately with soap and water. Seek medical advice immediately.
After eye contact: In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical assistance.
After ingestion: Do not induce vomiting. Summon a doctor immediately.
Fire-fighting measures
Suitable extinguishing media: Water spray jet; Alcohol-resistant foam; Carbon dioxide; extinguishing powder
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases: In the event of fire, the following can be released: Chlorine (Cl2)
Special protective equipment for fire-fighters: Use self-contained breathing apparatus. Wear protective clothing.
Accidental release measures
Personal precautions: Ensure adequate ventilation. Evacuate endangered area; Refer to protective measures listed in sections 7 and 8 of the safety data sheet.
Environmental precautions: Do not discharge into the drains/surface waters/groundwater.
Methods for cleaning up/taking up: Scoop-up mechanically. Send in suitable containers for recovery or disposal.
Handling and storage
Handling - Advice on safe handling: Ensure adequate ventilation. Avoid absolutely dust formation and dust depositation. Avoid contact with skin and eyes
Storage - Requirements for storage rooms and vessels: Storage rooms must be properly ventilated. Keep container hermetically closed in a dry, cool and well-ventilated place.
Storage - Advice on storage assembly: Protect against humidity; Do not store together with: Alcalies; Aluminium; Potassium; Sodium
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN1733
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN1733
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN1733
Shipping information
- Proper shipping name and description:
- Antimony trichloride
- Chemical name:
- Antimony trichloride
- Labels:
- 8
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN1733
Shipping information
- Proper shipping name and description:
- Antimony trichloride, solid
- Chemical name:
- Antimony trichloride
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
- Workplace exposure limit value: 0.5 mg/m^3 respirable fraction for antimony and antimony compounds
- Personal protective equipment:
Respiratory protection: If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of dust formation, take appropriate measures for breathing protection in the event workplace thresholds values are not specified.
Hand protection:
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product . Before use, the protective glove should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Appropriate Material nitrile rubber
Appropriate Material PVC
Eye protection
Tightly fitting safety glasses (EN 166).
Skin protection
Wear suitable protective clothing
General protective and hygiene measures
Avoid contact with eyes and skin. At work do not eat, drink, smoke or take drugs. Remove contaminated clothing. After worktime and during work intervals the affected skin areas must be thoroughly cleaned.
Stability and reactivity
Conditions to avoid: Protect against humidity.
Materials to avoid: alcalis, aluminium, sodium, potassium
Hazardous decomposition products: chlorine; hydrogen chloride (HCl).
Disposal considerations
Product:
- Product: Provide for recycling by the manufacturer or send to an authorised special waste facility or treatment facility adhering to the Special Waste Regulations. Generally, chemical residues must be handled and disposed of as special waste. Please contact the competent authority that provides information for proper disposal, recycling or reclamation of the substance.
Packaging:
Dispose of in accordance with federal, state and local regulations. Packaging that cannot be cleaned should be disposed of as product waste.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
