Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 426-730-3 | CAS number: 123439-82-7
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density, other
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 24 February 2017
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Only a 2 page study summary, though the critical information for this endpoint is included.
- Remarks:
- Conducted according to GLP
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- GLP compliance:
- yes
- Other quality assurance:
- ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
- Type of method:
- air comparison pycnometer (for solids)
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: 2017/02
- Expiration date of the lot/batch: No data
- Purity test date: No data
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: No data
- Stability under test conditions: No data
- Solubility and stability of the test substance in the solvent/vehicle: No data
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: No data
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: No data
- Final dilution of a dissolved solid, stock liquid or gel: No data
- Final preparation of a solid: No data - Dynamic viscosity of test material:
- No data
- Key result
- Type:
- density
- Density:
- 2.705 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- The density of tetraammineplatinum(II) hydrogen carbonate at 20 °C was determined to be 2.705 g/cm3.
- Executive summary:
In a guideline study, conducted to GLP, the density of tetraammineplatinum(II) hydrogen carbonate was determined by the pycnometer method to be 2.705 g/cm3 at a temperature of 20 °C.
Reference
| Test number | 1 | 2 | |
| Mass/g | 2.2683 | 2.1284 | |
| Temperature/°C | Run | 19.98 | 20.03 |
| Volume/cm3 | 1 | 0.8358 | 0.7894 |
| 2 | 0.8353 | 0.7891 | |
| 3 | 0.8362 | 0.7888 | |
| 4 | 0.8373 | 0.7899 | |
| 5 | 0.8364 | 0.7896 | |
| Average volume/cm3 | 0.8362 | 0.7894 | |
| Density/gcm-3 | 2.7126 | 2.6964 |
Description of key information
The density of tetraammineplatinum(II) hydrogen carbonate at 20 °C was determined to be 2.705 g/cm3 (Mekelburger, 2017a).
Key value for chemical safety assessment
- Relative density at 20C:
- 2.705
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
