Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-841-8 | CAS number: 88-58-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 08 November 2017 to 14 December 2017
- Reliability:
- 1 (reliable without restriction)
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: TS140610
- Expiration date of the lot/batch: 03 Nobember 2018
- Purity test date:
RADIOLABELLING INFORMATION (if applicable)
- Radiochemical purity:
- Specific activity:
- Locations of the label:
- Expiration date of radiochemical substance:
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material:
- Stability under test conditions:
- Solubility and stability of the test substance in the solvent/vehicle:
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium:
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing:
- Preliminary purification step (if any):
- Final dilution of a dissolved solid, stock liquid or gel:
- Final preparation of a solid:
FORM AS APPLIED IN THE TEST (if different from that of starting material)
TYPE OF BIOCIDE/PESTICIDE FORMULATION (if applicable)
OTHER SPECIFICS: - Analytical monitoring:
- yes
- Details on sampling:
- Analysis of the test preparations at 0 hours showed measured test concentrations to range from 0.019 to 5.3 mg/L. A decline in measured test concentrations was observed after each 24-Hour period in the range of less than the limit of quantification (LOQ), determined to be 0.0080 mg/L, to 0.025 mg/L at 24 hours and to less than the LOQ in all test preparations at both 48 and 72 hours. Current regulatory advice is that in cases where a decline in measured concentrations is observed, geometric mean measured concentrations should be used for calculating EC50 values. It was therefore considered justifiable to base the results on the geometric mean measured test concentrations in order to give a “worst case” analysis of the data. In cases where the measured concentration was less than the LOQ of the analytical method following current regulatory advice a value of half the LOQ (i.e. 0.0040 mg/L) was used to enable calculation of the geometric mean measured concentration.
- Vehicle:
- no
- Details on test solutions:
- The concentration and stability of the test item in the test preparations were verified by chemical analysis at 0, 24, 48 and 72 hours. As in the range-finding test 250 mL glass conical flasks were used. Six flasks each containing 100 mL of solution were used for the control group and 3 flasks each containing 100 mL were used for each treatment group. A nominal amount of test item (1100 mg) was dispersed in 11 liters of culture medium with the aid of propeller stirring at approximately 1500 rpm for 48 hours. After 48 hours the stirring was stopped and any undissolved test item was removed by filtration through a 0.2 μm filter (first approximate 2 liters discarded in order to pre-condition the filter) to give a 100% v/v saturated solution. A series of dilutions was made from this saturated solution to give stock solutions of 32, 10, 3.2 and 1.0% v/v saturated solution. An aliquot (900 mL) of each of the stock solutions was separately inoculated with 3.8 mL of algal suspension to give the required test concentrations of 1.0, 3.2, 10, 32 and 100% v/v saturated solution.
- Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- The test was carried out using Pseudokirchneriella subcapitata strain CCAP 278/4. Liquid cultures of Pseudokirchneriella subcapitata were obtained from the Culture Collection of Algae and Protozoa (CCAP), SAMS Research Services Ltd, Scottish Marine Institute, Oban, Argyll, Scotland. Master cultures were maintained in the laboratory by the periodic replenishment of culture medium (Section 3.3). The master cultures were kept under constant agitation by orbital shaker (100 to 150 rpm) and constant illumination at 24 ±1 °C. Prior to the start of the test sufficient master culture was added to approximately 100 mL volumes of culture media contained in conical flasks to give an initial cell density of approximately 103 cells/mL. The flasks were plugged with polyurethane foam stoppers and kept under constant agitation by orbital shaker (100 to 150 rpm) and constant illumination at 24 ±1 °C until the algal cell density was approximately 104 to 105 cells/mL.
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
- Nominal and measured concentrations:
- Based on the results of the range-finding test the following test concentrations were assigned to the definitive test: 1.0, 3.2, 10, 32 and 100% v/v saturated solution. The geometric mean measured test concentrations were determined to be 0.0055, 0.010, 0.017, 0.028, and 0.12 mg/L.
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 0.012 mg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat. (dissolved fraction)
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 0.038 mg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat. (dissolved fraction)
- Basis for effect:
- growth rate
- Details on results:
- Analysis of the test preparations at 0 hours showed measured test concentrations to range from 0.019 to 5.3 mg/L. A decline in measured test concentrations was observed after each 24-Hour period in the range of less than the limit of quantification (LOQ), determined to be 0.0080 mg/L, to 0.025 mg/L at 24 hours and to less than the LOQ in all test preparations at both 48 and 72 hours. Given this decline in measured test concentrations it was considered appropriate to calculate the results based on the geometric mean measured test concentrations only in order to give a “worst case” analysis of the data. The geometric mean measured test concentrations were determined to be 0.0055, 0.010, 0.017, 0.028 and 0.12 mg/L.
- Reported statistics and error estimates:
- One way analysis of variance incorporating Bartlett's test for homogeneity of variance (Sokal and Rohlf, 1981) and Dunnett's multiple comparison procedure for comparing several treatments with a control (Dunnett, 1955) was carried out on the growth rate and yield data after 72 hours for the control and all test concentrations to determine any statistically significant differences between the test and control groups. All statistical analyses were performed using the SAS computer software package (SAS, 1999 - 2001).
- Validity criteria fulfilled:
- yes
- Conclusions:
- The 72 hour EC50 value based on inhibtion of growth rate was determined to be 0.038 mg/L.
- Executive summary:
Statistical analysis of the growth rate data determined from an OECD 201 study was carried out for the control and all test concentrations using one way analysis of variance incorporating Bartlett's test for homogeneity of variance (Sokal and Rohlf, 1981) and Dunnett's multiple comparison procedure for comparing several treatments with a control (Dunnett, 1955). There were no statistically significant differences between the control, 0.0055 and 0.010 mg/L test concentrations (P≥0.05), however all other test concentrations were significantly different (P<0.05) and, therefore the NOEC based on growth rate was 0.010 mg/L. Correspondingly the Lowest Observed Effect Concentration (LOEC) based on growth rate was 0.017 mg/L, while the EC50 value was 0.038 mg/L.
Reference
Description of key information
The effect of the test item on the growth of Pseudokirchneriella subcapitata has been investigated over a 72 hour period and based on the geometric mean measured test concentrations the EC50 value for growth was reported as 0.038 mg/L.
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 0.038 mg/L
- EC10 or NOEC for freshwater algae:
- 0.012 mg/L
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.