Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-288-3 | CAS number: 137-30-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 8 - 11 Apr 2014
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- a solvent was used for the study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- Version / remarks:
- adopted 23 March 2006
- GLP compliance:
- yes
- Remarks:
- laboratories in the USA are not certified by any governmental agency, but are subject to official inspections
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: 12.0, 27.8, 53.4, 97.4, and 180 µg ziram/L
- Sampling method: Samples at 24 and 48 hours were taken from single, sacrificial replicates designated for analytical measurements only. At exposure termination, samples were collected from the pooled replicates from each treatment and control group.
- Sample storage conditions before analysis: At each interval, samples were collected directly into amber glass vials and processed immediately for analysis. Two sets of samples were collected at each interval. One set was immediately analyzed and the second set was stabilized and stored frozen for possible future analysis. - Vehicle:
- yes
- Remarks:
- N,N-dimethylformamide (DMF)
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: A stock solution of 3000 µg ziram/mL in DMF was prepared. Each test solution was prepared by diluting 100 µL of each respective stock in 1000 mL of freshwater AAP medium.
- Chemical name of vehicle (organic solvent, emulsifier or dispersant): N,N-dimethylformamide (DMF)
- Concentration of vehicle in test medium (stock solution and final test solution(s) including control(s)): The stock was serially diluted with DMF to prepare four additional stocks at target nominal concentrations of 188, 375, 750 and 1500 µg ziram/mL. Each test solution was prepared by diluting 100 µL of each respective stock in 1000 mL of freshwater AAP medium.
- Controls: The negative control solution consisted of freshwater AAP medium without test substance added. The solvent control solution contained 0.1 mL DMF/L, which was equivalent to the solvent concentration in all of the treatment groups. - Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: green algae
- Source (laboratory, culture collection): Original algal cultures were obtained from the University of Toronto, and have been maintained in culture medium at the laboratory since March 2000.
- Age of inoculum (at test initiation): Algal cells for this study were taken from a culture that had been transferred to fresh medium four days prior to test initiation.
- Method of cultivation: The algal cells were cultured and tested in freshwater AAP medium. The pH of the medium was adjusted to 7.5. Test chambers were held in an environmental chamber at a temperature of 24 ± 2ºC. The target light intensity was 6000 lux ± 10%. - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
- Post exposure observation period:
- none
- Hardness:
- Freshwater AAP medium
- Test temperature:
- 24 ± 2ºC
- pH:
- 7.5
- Dissolved oxygen:
- not reported
- Salinity:
- not reported
- Nominal and measured concentrations:
- Nominal: Solvent control, Negative control, 18.8, 37.5, 75.0, 150, 300 µg/L
Measured: >LOQ, >LOQ, 12.0, 27.8, 53.4, 97.4, 180 µg/L (geometric mean) - Details on test conditions:
- TEST SYSTEM
- Test vessel: sterile, 250-mL glass Erlenmeyer flasks plugged with sterile foam stoppers
- Type (delete if not applicable): closed
- Fill volume: 100 mL
- Aeration: mechanical shaker at 100 rpm
- Initial cells density: 10,000 cells/mL
- Control end cells density: Negative Control: 1,521,867 cells/mL; Solvent Control 1,645,964 cells/mL
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 6
- No. of vessels per vehicle control (replicates): 3
GROWTH MEDIUM
- Standard medium used: yes
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: purified well water
- Metals: checked
- Pesticides: checked
- Chlorine: checked
- Ca/Mg ratio: 2.62
- Culture medium different from test medium: no
OTHER TEST CONDITIONS
- Adjustment of pH: adjusted to 7.5
- Photoperiod: Uniform and continuous cool-white fluorescent lighting
- Light intensity: 5540 - 6120 lux
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Determination of cell concentrations: electronic particle counter
- Chlorophyll measurement: no
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 2
- Range finding study
- Test concentrations: 10, 30, 100, 300 µg/L
- Results used to determine the conditions for the definitive study: 34% and 99% inhibition at 100 and 300 µg/L, respectively - Reference substance (positive control):
- yes
- Remarks:
- A test with a reference substance is performed at least once a year.
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 94 µg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% CI: 90.0 to 97.7 µg/L
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 65.8 µg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% CI: 60.9 to 71.2 µg/L
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 53.4 µg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC20
- Effect conc.:
- 74.4 µg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: 95% Cl: 69.8 to 79.2 µg/L
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 73.3 µg/L
- 95% CI:
- >= 30.2 - <= 178
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- yield
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 58.8 µg/L
- 95% CI:
- >= 12.5 - < 180
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- yield
- Details on results:
- - Exponential growth in the control (for algal test): yes
- Observation of abnormalities (for algal test): no
- Unusual cell shape: no
- Colour differences: no
- Flocculation: no
- Adherence to test vessels: no
- Aggregation of algal cells: no
- Any stimulation of growth found in any treatment: no
- Any observations (e.g. precipitation) that might cause a difference between measured and nominal values: no
- Effect concentrations exceeding solubility of substance in test medium: no - Results with reference substance (positive control):
- not reported
- Validity criteria fulfilled:
- yes
- Remarks:
- For details please refer to field "any other information on results incl. tables"
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 2 June 1995- 24 October 1995
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- a solvent was used in the study
- Qualifier:
- according to guideline
- Guideline:
- other: FIFRA Guideline Number: 122-2
- Qualifier:
- according to guideline
- Guideline:
- other: FIFRA Guideline Number: 123-2
- GLP compliance:
- yes
- Analytical monitoring:
- yes
- Details on sampling:
- - At test initiation and test termination (day 5) a single sample was collected from each control and test solutions and analyzed for Ziram concentration, based on measurement of 14C residues. Three Quality Control (TQC) samples were prepared at test initiation and termination using fresh algal growth medium. In addition to the exposure solution analyses, triplicate samplesof the Ziram stock solution at test initiation for confirmation of parent Ziram concentration.
- Vehicle:
- yes
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION
- Method: A primary stock solution of 14C Ziram was first prepared by dissolving the entire amount of 14C Ziram received (5 mCi) in dimethylformamide, to a total volume of 50 mL. Triplicate 10 uL aliquots of this primary stock solution were assayed by liquid scintillation counting (LSC) which yielded a mean concentration of 0.569 mg a.i/mL. Furthermore, a 6 mg a.i/mL stock solution (combination of radiolabelled and non radiolabelled Ziram) was prepared by dissolving 0.304g of non radiolabelled Ziram (0.2979 g as a.i) and 0.35 mL of the 0.569 mg a.i/mL radio labelled stock solution (1.992 mg) with DMF to a volume of 50 mL. Then, a 50 uL aliquot of the 6 mg a.i/mL stock solution was further diluted to 500 mL with esterile AAP medium, to prepare the highest nominal concentration. Appropriate volumes of this solution were diluted to 10 mL with DMF to prepare secondary stock solutions (for the other nominal concentrations). Aliquots of 50 uL of each secondary stock solution were the diluted to 500 mL to give the final nominal concentrations to be tested.
- Controls: control and solvent control
- Chemical name of vehicle: dimethylformamide (DMF)
- Concentration of vehicle in test medium: 0.10 uL/mL
- Evidence of undissolved material: the solutions appeared to be clear and colourless without any signs of undissolved material - Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Strain: 1648
- Source: Carolina Biological Supply Company, Burlington, North Carolina, USA
ACCLIMATION
- Culturing media and conditions: the culture medium used was Algal Assay Procedure (AAP) medium prepared with esterile deionized water. The pH of this culture medium was adjusted to 7.5 +/-1 and stock cultures were grown in 125 mL flasks containing 50 mL medium. The stock cultures were maintained within the following conditions for a minimum of 3 days prior to test initiation: a shaking rate of 100 +/- 10 rpm, 24 +/- 1°C temperature and continuous illumination at the surface of the medium at a intensity of 3200 to 5000 lux. - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 5 d
- Test temperature:
- 24 +/- 1°C
- pH:
- 7.5-8.8
- Nominal and measured concentrations:
- Nominal concentrations: 0.039, 0.075, 0.15, 0.30, and 0.60 mg a.i/L
Measured concentrations: 0.038, 0.072, 0.14, 0.27 and 0.48 mg a.i/L - Details on test conditions:
- TEST SYSTEM
- Test vessel: 125 mL Erlenmayer flasks, containing 50 mL test medium
- Initial cells density: 0.3 x104 cells/mL
- Control end cells density: 270x104 and 331x104 (control and solvent control)
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 3
- No. of vessels per vehicle control (replicates): 3
GROWTH MEDIUM
- Standard medium used: yes, AAP medium
OTHER TEST CONDITIONS
- Photoperiod: continuous illumination
- Light intensity: 3200-5400 lux
- Conductivity: 90-110 umhos/cm
EFFECT PARAMETERS MEASURED :
- Determination of cell desity at days 1, 2, 3, 4 and 5.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 2
- Range finding study: 5 to 10 April 1995
- Test concentrations: 0.0060, 0.060, 0.6 and 6 mg/L
- Results used to determine the conditions for the definitive study: cell densities averaged 138, 125, 0.13 and 0x104 cells/mL respectively (low to
high concentration) - Duration:
- 5 d
- Dose descriptor:
- EC50
- Effect conc.:
- 0.066 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Duration:
- 5 d
- Dose descriptor:
- NOEC
- Effect conc.:
- 0.038 mg/L
- Nominal / measured:
- meas. (arithm. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Reported statistics and error estimates:
- William's test, Shapiro-Wilks normality test, Bettler's homogeneity of variance test (95% or 99% level of certainty)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- disregarded due to major methodological deficiencies
- Study period:
- 4 May 2006- 3 July 2007
- Reliability:
- 3 (not reliable)
- Rationale for reliability incl. deficiencies:
- other: Relevant methodological deficiencies
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- Deviations:
- yes
- Remarks:
- actual test substance concentrations were estimated but not measured
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- The Swiss GLP Monitoring Authorities
- Analytical monitoring:
- yes
- Details on sampling:
- - The concentration of active ingredient was measured at test start and test end in order to provide an evidence that the concentration of the test substance being tested was satisfactorily maintained throughout. As the test was carried out at low concentrations, analytical measurements of active ingredient were not possible in the actual exposure concentrations. Therefore measurement of concentration of active and extrapolation of the results were performed as described in ECETOC (1996). Analysis of active ingredient was performed only in the stock solution (22.40 mg/L) which was exposed without test organisms at the same conditions as actual test solutions. Stock solution was measured at 0 and 72 hours and the results were extrapolated to the concentrations used in the definitive test.
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION
- Method: The test substance and the stock solution were dissolved with sterile deionized water and the test solutions with sterile liquid medium (L.C. Oligo). Test solutions were prepared only at test start. A portion of each test solution (10 mL) was mixed with sterile liquid medium (89 mL) and algae suspension (1.0 mL) and distributed per flask (total volume per flask was 100 mL)
- Controls: sterile liquid medium (L.C. Oligo), sterile deionized water and algae inoculum - Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Green algae
- Source: CETESB (Sao Paulo, Brazil)
ACCLIMATION
- Acclimation period/ Culturing media and conditions: Algae from stock cultures in solid medium were transferred to a 100 mL sterile liquid medium (L. C. Oligo) and were kept in the growth chamber for 3 days in the same environmental conditions as in the test. Liquid culture was centrifuged in glass tubes on the first day of testing for 15 minutes at 1500 rpm. Sediment was suspended in 15 mL of sterile liquid medium (L. C. Oligo). This procedure was repeated twice and cell density was determined in a spectrophotometer HACH DR/2000 - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
- Test temperature:
- 24.5 +/- 0.5°C
- pH:
- Control: 7.39- 9.40
Treatment groups: 6.52- 8.16 - Nominal and measured concentrations:
- Nominal concentrations: 0.14mg/L, 0.28 mg/L, 0.56 mg/L, 1.12mg/L and 2.24 mg/L
Nominal concentrations active ingredient: 1.70 mg/L, 0.85 mg/L, 0.43 mg/L, 0.21 mg/L, 0.11 mg a.i./L
Extrapolated concentrations from stock solution measurements, active ingredient (initial-final): 1.74-1.75 mg/L, 0.87-0.88 mg/L, 0.43-0.44 mg/L, 0.22-0.22 mg/L, 0.11-0.11 mg a.i./L - Details on test conditions:
- TEST SYSTEM
- Test vessel: 250 mL Erlenmayer flasks
- Initial cells density: ca. 2 x 10exp4 cells/mL
- Control end cells density: 16.2 x 10exp5
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 3
GROWTH MEDIUM
- Detailed composition medium: L.C. Oligo medium:
Ca(N03)2.4H20 40.0 mg/L
KNO3 100.0 mg/L
MgSO4.7H20 30.0 mg/L
K2HPO4 40.0 mg/L
CuSO4.5H20 0.015 mg/L
(NH4)6Mo7O24.4H20 0.030 mg/L
ZnSO4.7H20 0.030 mg/L
CoC12.6H20 0.030 mg/L
Mn(N03)2.4H20 0.030 mg/L
C6H802.H20 0.030 mg/L
H3B03 0.030
C6H5FeO7.5H20 0.8 125
FeC13.6H20 0.3 125
FeSO4.7H20 0.3 125
NaHCO3 15.0
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: sterile deionized water
OTHER TEST CONDITIONS
- Sterile test conditions: yes
- Adjustment of pH: no
- Photoperiod: continuous illumination
- Light intensity and quality: 3490-5820 lux, fluorescent light
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Determination of cell concentrations
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 2
- Range finding study
- Test concentrations: 0.001 mg/L; 0.010mg/L; 0.100 mg/L and 1.00mg/L
- Results used to determine the conditions for the definitive study: Range finding test showed inhibition of growth rate higher than 50% at 1 .00mg/L and 0.010 mg/L after 72 h - Reference substance (positive control):
- yes
- Remarks:
- Potassium dichromate
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 0.28 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- LOEC
- Effect conc.:
- 0.56 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 0.5 mg/L
- Nominal / measured:
- estimated
- Conc. based on:
- act. ingr.
- Basis for effect:
- growth rate
- Results with reference substance (positive control):
- The 96-h EC50 using data from several accumulated tests was 3.79 mg K2Cr2O7/L, with limits (mean ± 2.SD) of 1.31 and 6.27mg K2Cr2O7/L
- Reported statistics and error estimates:
- Chi-square test for normality (USEPA,2002)
Bartlett's test for homogeneity of variance (USEPA, 2002)
William's test (Gerbert et al., 1985; Williams, 1971, 1972) - Validity criteria fulfilled:
- yes
- Remarks:
- For details please refer to field "any other information on results incl. tables"
Referenceopen allclose all
Analytical verification of the test item confirmed a recovery of the test item in the test solutions at test termination in a range from 41 to 67 % of nominal concentrations. Therefore, the results of the study are based on geometric mean measured concentrations.
Table 1: Validity criteria for OECD 201 (2006)
Criterion from the guideline |
Outcome |
Validity criterion fulfilled |
The biomass in the control cultures should have increased exponentially by a factor of at least 16 within the 72-hour test period. |
Mean cell density in the control flasks increased by a factor of 206 after three days. |
yes |
The mean coefficient of variation for section-by-section specific growth rates (days 0-1, 1-2 and 2-3, for 72-hour tests) in the control cultures must not exceed 35% |
The mean per cent coefficient of variation for section-by-section specific growth rates in the control replicates was 21.3 %. |
yes |
The coefficient of variation of average specific growth rates during the whole test period in replicate control cultures must not exceed 7% in tests with Pseudokirchneriella subcapitataand Desmodesmus subspicatus. For other less frequently tested species, the value should not exceed 10%. |
The coefficient of variation of average specific growth rates in the control replicates was 2.7 %. |
yes |
Validity criteria fulfilled:
1. Control cultures increased by a factor higher than 16 within 72 hours
2. Coefficient of variation of average specific growth rates in the control was 7%
3. The mean coefficient of variation of the specific growth rates section-by-section in the control was 13%
Description of key information
ErC10 (72 h) = 65.8 µg/L (geom. mean measured, Pseudokirchnerella subcapitata, EOCD 201)
ErC50 (72 h) = 94 µg/L (geom. mean measured, Pseudokirchnerella subcapitata, EOCD 201)
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 94 µg/L
- EC10 or NOEC for freshwater algae:
- 65.8 µg/L
Additional information
The toxicity of zinc bis dimethyldithiocarbamate (CAS No. 137-30-4) to algae species was investigated in three studies.
The test chosen as key study (2014) was conducted according to the OECD Guideline No. 201 and GLP. The test organism Pseudokirchnerella subcapitata was exposed in a static test regime, for 72 h to 5 nominal test item concentrations of 18.8, 37.5, 75, 150 and 300 µg/L as well as a solvent and a negative control. N,N-dimethylformamide (DMF) was used as a vehicle. Effects on biomass and growth were measured. An analytical verification of the test substance was performed by LC/MS/MS, which confirmed a 72- hour recovery of the test substance in the test solutions between 41 and 67 % of nominal concentrations. Therefore, the results of the study are based on geometric mean measured concentrations (12.0, 27.8, 53.4, 97.4 and 180 µg/L). The resulting ErC50 and ErC10 (72 h) values based on growth inhibition were determined to be 73.3 and 65.8 µg/L, respectively. This study was chosen as key study since it bears the most appropriate study design and reliable results.
An additional study (1995) conducted according to the FIFRA Guidelines 122-2 and 123-2 is available. Pseudokirchneriella subcapitata was exposed to the test substance for 120 h. The results from this test are expressed on the basis of algae biomass, resulting in an EbC50 (120 h) of 66 µg/L (arith. mean measured).
A further study (2007) with Pseudokirchnerella subcapitata is available which was performed according to the OECD Guideline No. 201 and GLP. However, the validity of the test was impaired by unreliable analysis of the test material in medium.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.