Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 247-953-0 | CAS number: 26747-90-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Feb 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 016
- Report date:
- 2016
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- 2,4-dioxo-1,3-diazetidine-1,3-bis(methyl-m-phenylene) diisocyanate
- EC Number:
- 247-953-0
- EC Name:
- 2,4-dioxo-1,3-diazetidine-1,3-bis(methyl-m-phenylene) diisocyanate
- Cas Number:
- 26747-90-0
- Molecular formula:
- C18H12N4O4
- IUPAC Name:
- bis(3-isocyanato-4-methylphenyl)-1,3-diazetidine-2,4-dione
- Test material form:
- solid
Constituent 1
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Batch No.of test material: 221305
- Purity: > 98.0 %
- Expiration date of the lot/batch: 2016-06-09
Test animals / tissue source
- Species:
- other: isolated cornea from eyes of slaughtered cattle
- Details on test animals or tissues and environmental conditions:
- SOURCE OF COLLECTED EYES
- Source: Slaughterhouse Laame, Buchenhofen 26, 42329 Wuppertal, Germany
- Extraction: Staff of the slaughterhouse
- Transport: 1L containers with 500 mL HSS and 1 % penicillin/streptomycin solution; transport of the containers in coolers on ice
Test system
- Vehicle:
- other: corn oil
- Controls:
- yes, concurrent vehicle
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- 750 μL per cornea
- Duration of treatment / exposure:
- 4 hours
- Duration of post- treatment incubation (in vitro):
- 90 minutes
- Number of animals or in vitro replicates:
- 3
- Details on study design:
- - PREPARATION OF CORNEAS: Eyes were examined after delivery to the laboratory for any damage (like opacity, scratches or neovascularization) on the day of slaughter (1 day before the experiment). Eyes without any visible defects were transferred into new containers with fresh HSS solution supplemented with 1 % penicillin I streptomycin solution and 1 % FBS and stored overnight at refrigerator temperature (2-8 °C). Eyes with defects were discarded. On the next day (day of experiment) the containers with the eyes were transferred in an incubator at 32 °C (± 1 °C) for about 2 hours. For the preparation of the cornea the sclera of each eye was incised with a scalpel and cut by scissors. A 2-3 mm scleral edge was left around the cornea for further handling. The isolated corneas were placed with the epithelium side down into a prepared beaker filled with MEM medium supplemented with 1 %penicillin I streptomycin solution and 1 % FBS. Each cornea was placed in a cornea holder with the endothelial side on the sealing ring of the posterior chamber. The anterior chamber was then fixed by screws on the other side. The chambers were filled with MEM medium, avoiding air bubbles. The holders so prepared were transferred for at least 1 hour into the incubator at 32 °C (± 1 °C).
- SELECTION OF CORNEAS FOR APPLICATION: Following 1 hour in the incubator, the MEM medium was aspirated and the chambers were refilled with fresh MEM medium. For each cornea the reference opacity value was measured then. The mean and standard deviation of the measured values were calculated by using Microsoft Excel. The corneas with values within the range of mean ± standard deviation were selected for the actual test and assigned to the test groups. The numbers of the corneas selected were documented in an appropriate protocol. The holders were labeled with a new serial number for the further testing.
- APPLICATION OF THE TEST MATERIAL AND INCUBATION: Immediately before application, the medium was aspirated from the anterior chamber. 750 µL of the test material formulations were applied to the corneas, each through the holes of the anterior chamber. The holes of both chambers were sealed with adhesive tape and the holders were kept with the front side up, so that the formulations covered the cornea sufficiently. The holders were transferred into the incubator at 32 °C (± 1 °C) for the exposure time of 4 hours. After the exposure, the formulations were aspirated from the anterior chamber. The corneas treated with the vehicle control, the negative and the positive control were rinsed at least 3 times with phenol red containing MEM to show effectiveness of test substance removal. The corneas treated with the test item were rinsed at first with com oil and then also at least 3 times with phenol red containing MEM. During the final rinse cycle the corneas were rinsed again with pure MEM medium in order to remove residues of the dye. The anterior chamber was then filled again with MEM medium to avoid drying out of the cornea. Before measuring opacity, fresh MEM medium was filled in the chambers.
- DETERMINATION OF OPACITY: The opacity of a cornea was measured by the diminution of light passing through the cornea. The measurements of opacity were carried out using an opacitometer BASF OP3.0 (with integrated light meter testo 545 and Comfort 3.4 SP6 software from Testo AG, Lenzkirch). The validation of the opacitometer was carried out under the study number T8082017. Before each measurement the opacitometer was adjusted to about 1000 LUX and a filter calibration measurement was carried out by using 3 different filters.
- DETERMINATION OF PERMEABILITY: The medium in anterior chamber of each holder was replaced by 1 ml of fluorescein sodium solution (concentration 5 mg/mL). Afterwards the holders were incubated at 32 oc (± 1 °C) for about 90 minutes. After the incubation period, the medium of the posterior chamber was aspirated by a syringe and filled into a 10 mL tube. Three wells of a 96 well plate were filled with 300 )lL of each tube (triplicate determination). In addition, a standard series of 5 mg/mL sodium fluorescein solution was prepared and also filled into the 96-well plate, in triplicates. The permeability was determined by measuring the amount of fluorescein sodium which diffused through all cell layers of the cornea. The measurement was carried out at a wavelength of 490 nm (OD490) by an ELISA- Reader (Bio-Tek EL 808, Software Gen5).
- CALCULATION AND EVALUATION OF IN VITRO IRRITANCY SCORE (IVIS): All parameters and the IVIS values were calculated by using Microsoft Excel. The validation of the Excel file was carried out under the study number T0082019.
The opacity values were calculated by applying the following formulae:
1) Opacity= (Io/I-0.9894)/0.0251
2) Opacity change = opacity after application - opacity before application
3) Corrected opacity change= opacity change- mean opacity change NC
4) Mean opacity = mean of all corrected opacity changes per group
The permeability values were calculated by applying the following formulae:
1) OD49o change OD490 value - mean blank value OD490
2) Corrected OD490 change= OD490 change- mean OD490 change NC
3) Mean OD490 =mean of all corrected OD490 changes per group
Calculation of In Vitro Irritancy Score (IVIS):
1) IVIS per cornea= corrected opacity change+ (15 x corrected OD490 change)
2) IVIS per group mean of IVIS values per cornea in a group
Io = single value of the measurement of empty holder with medium but without cornea, measured l-2days before the experiment;
I = individual value of each opacity measurement before and after application 0.9894/0.0251 is a constant, which is required for calculation.
- DECISION CRITERIA: The IVIS cut-off values for identifying test chemicals as inducing serious eye damage (UN GHS Category 1) and test chemicals not requiring classification for eye irritation or serious eye damage (UN GHS No Category) are given hereafter:
IVIS <= 3 (No category), IVIS > 3 - <= 55 (No prediction can be made / No Category 1) or IVIS > 55 (Category 1)
Results and discussion
In vitro
Results
- Irritation parameter:
- other: in vitro irritancy score (IVIS)
- Run / experiment:
- 4 hrs
- Value:
- 10.5
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
Any other information on results incl. tables
Table 1: Tabular in vitro irritancy scores (IVIS)
Cornea No. | Opacity per cornea | Permeability per cornea | IVIS per cornea | IVIS mean | SD | |
Negative control (0.9 % NaCl) |
1 | 1.8 | 0.008 | 2.0 | ||
2 | - 2.1 | 0.007 | - 2.0 | - 0.3 | 2.0 | |
3 | - 0.9 | 0.008 | - 0.8 | |||
Positive control (20 % Imidazol) |
4 | 90.0 | 0.928 | 106.5 | ||
5 | 377.3 | 1.331 | 391.2 | 198.1 | 167.4 | |
6 | 76.5 | 0.940 | 96.4 | |||
Vehicle control (corn oil) |
7 |
1.8 |
0.003 |
1.9 |
|
|
8 |
10.0 |
0.003 |
10.9 |
8.2 |
5.5 |
|
|
9 |
11.9 |
0.002 |
11.9 |
|
|
Test item (20 % Metalink U) |
10 |
16.8 |
0.002 |
16.8 |
|
|
|
11 |
4.9 |
0.001 |
4.9 |
10.5 |
6.0 |
12 | 9.8 | - 0.001 | 9.7 |
No potential for serious eye damage was concluded from the study, as the IVIS was below 55 for the test item.
Applicant's summary and conclusion
- Interpretation of results:
- other: no severe eye damage
- Executive summary:
Metalink U was investigated in the Bovine Corneal Opacity and Permeability (BCOP) test according to OECD TG 437. The epithelial surface of the corneas was exposed to 750 µL of the test substance formulated in corn oil. Measurement of corneal opacity and permeability after a 4 hours exposure followed by a post-treatment incubation of 90 minutes revealed an in vitro irritation score (IVIS) of 10.5, well below the threshold for classification of serious eye damage (IVIS <=55). The positive (20 % imidazol) and negative (saline solution) controls confirmed the validity of the test. Thus, under the conditions of this test Metalink U was characterized by having no potential to seriously damage the eye.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)