Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 273-321-9 | CAS number: 68956-82-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Acute Toxicity: inhalation
Administrative data
- Endpoint:
- acute toxicity: inhalation
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2011-01-25 to 2011-03-15
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 011
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 436 (Acute Inhalation Toxicity: Acute Toxic Class Method)
- Version / remarks:
- 2009-09-07
- Deviations:
- yes
- Remarks:
- at one concentration of the main study 5 males and 5 females were used.
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- signed 2009-11-12
- Test type:
- acute toxic class method
- Limit test:
- yes
Test material
- Reference substance name:
- Resin acids and Rosin acids, cobalt salts
- EC Number:
- 273-321-9
- EC Name:
- Resin acids and Rosin acids, cobalt salts
- Cas Number:
- 68956-82-1
- IUPAC Name:
- λ²-cobalt(2+) bis((1R,4aR,4bR,10aR)-1,4a-dimethyl-7-(propan-2-yl)-1,2,3,4,4a,4b,5,6,10,10a-decahydrophenanthrene-1-carboxylate)
- Details on test material:
- - Name of test material (as cited in study report): Cobalt resinate
- Molecular formula: (C19H29COO)2Co
- Molecular weight: 661.84 g/mol
- Physical state: blue powder
- Storage condition of test material: under nitrogen, kept away from air, moisture, heat and light
- Particle size parameter were determined with a CILAS 715 (Non-GLP determination): d(0.1) = 41.83 µm; d(0.5) = 80.49 µm (median); d(0.9) = 124.18 µm
- Melting point: 180.5 °C
- Water solubility: 33.53 mg/L at 20 °C; 272.89 mg/L at 37 °C
- Relative density: 1.195 at 20 °C
Constituent 1
Test animals
- Species:
- rat
- Strain:
- Crj: CD(SD)
- Sex:
- male/female
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Charles River Laboratories, Research Models and Services, Germany GmbH, Sandhofer Weg 7, 97633 Sulzfeld, Germany
- Age at start of administration: males: approx. 8 weeks; females:approx. 9 weeks
- Weight at start of administration: males: 231 - 257 g; females: 207 - 257 g
- Fasting period before study: feeding was discontinued approx. 16 hours before exposure; only tap water was then available ad libitum
- Housing: granulated textured wood (Granulat A2, J. Brandenburg, 49424 Goldenstedt, Germany) was used as bedding material for the cages. The cages were changed and cleaned twice a week; kept by sex in groups of 2 -3 animals in MAKROLON cages (type III plus)
- Diet (please refer to "Fasting period before study" above): commercial diet, ssniff® R/M-H V1534 served as food (ssniff Spezialdiäten GmbH, 59494 Soest, Germany)
- Water (ad libitum): drinking water
- Acclimation period: at least 5 adaptation days; the animals were randomised before use. The animals were acclimatised to the test apparatus for approx. 1 hour on 2 days prior to testing. The restraining tubes did not impose undue physical, termal or immobilization stress on the animals.
ENVIRONMENTAL CONDITIONS
- Temperature: 22 °C +/- 3 °C (maximum range)
- Relative humidity: 55 % +/- 15 % (maximum range)
- Photoperiod (hrs dark / hrs light): 12/12
Administration / exposure
- Route of administration:
- inhalation: dust
- Type of inhalation exposure:
- nose only
- Vehicle:
- clean air
- Mass median aerodynamic diameter (MMAD):
- >= 3.129 - <= 3.241 µm
- Geometric standard deviation (GSD):
- >= 2.75 - <= 3
- Details on inhalation exposure:
- GENERATION OF TEST ATMOSPHERE / CHAMBER DESCRIPTION
- Exposure apparatus: the study was carried out using a dynamic inhalation apparatus (RHEMA-LABORTECHNIK, 65719 Hofheim/Taunus, Germany) (air changes/h (≥ 12 times)) with a nose-only exposure of the animals according to KIMMERLE & TREPPER. The apparatus consists of a cyclindrical exposure chamber (volume 40 L) which is able to hold 10 animals in pyrex tubes at the edge of the chamber in a radial position.
- System of generating particulates/aerosols: the dust of the test material was generated with a rotating brush dust generator (RBG 1000, PALAS GmbH Partikel und Lasermesstechnik, 76229 Karlsruhe, Germany).
The generator was fed with compressed air (5.0 bar) from a compressor (ALUP Kompressorenfabrik, 73257 Köngen, Germany). (air was taken from the surrounding atmosphere of the laboratory room and filtered using an in-line disposable gas-filter).
At the bottom of the exposure chamber, the air was sucked off at a lower flow rate than it was created by the dust gnereator in order to produce a homogeneous distribution and a positive pressure in the exposure chamber (inflow 900 L/h,, outflow 800 L/h).
A manometer and an air-flow meter (ROTA Yokogawa GmbH & Co. KG, 79664 Wehr/Baden, Germany) were used to control the constant supply of compressed air and the exhaust, respectively. Flow rates were checked hourly and corrected if necessary.
The exhaust air was drawn through gas wash-bottles.
- Temperature, humidity, oxygen content, carbon dioxide content: the oxygen content in the inhalation chamber was 21 %. It was determined at the beginning and at the end of the exposure with a DRÄGER Oxygen-analysis test set (DRÄGER Tube oxygen 67 28 081). Carbon dioxide concentration did not exceed 1 %.
Temperature (19.5 °C +/- 0.1 °C (main study- 5.07 mg/L air), 21.1 °C +/- 0.1 °C (main study- 1.07 mg/L air), 20.3 °C +/- 0.1 °C (satellite group- 5.04 mg/L air) or 21.3 °C +/- 0.1 °C (satellite group-1.06 mg/L air)) and humidity (56.9 % +/- 0.2 % (main study - 5.07 mg/L air), 61.5 % +/- 0.2 % (main study - 1.07 mg/L air), 50.0 % +/- 0.6 % (satellite group - 5.04 mg/L air) or 60.5 % +/- 0.2 (satellite group-1.06 mg/L air)) were measured once every hour with a climate control monitor (testo 175-HZ data logger).
The whole exposure system was mounted in an inhalation facility to protect the laboratory staff from possible hazards.
The exposure was initiated by placing the animals' noses into the exposure chamber after equilibration of the chamber concentration for at least 15 minutes (t95 approximately 8 minutes).
Before initiating the study with the animals, a pre-test was carried out with the exposure system in order to verify that under the experimental settings chosen, the limit concentration of 5 mg/L air could be achieved by gravimetric analysis.
The tests with the main study animals and the recovery animals were conducted in the same inhalation chamber but on different days. Between the exposure times the chamber was cleaned carefully.
- Method of particle size determination: an analysis of the particulate size distribution was carried out twice during the exposure period using a cascade impactor according to MAY (MAY, K.R. Aerosol impaction jets, J. Aerosol Sci. 6, 403 (1975), RESEARCH ENGINEERS Ltd., London N1 5 RD, UK).
The dust from the exposure chamber was drawn through the cascade impactor for 5 or 10 minutes at a constant flow rate of 5 L/min. The slides were removed from the impactor and weighed on an analytical balance (SARTORIUS, type 1601 004, precision 0.1 mg). Deltas of slides' weight were determined.
The mass median aerodynamic diameter (MMAD) was estimated by means of non-linear regression analysis. The 32 µm particle size range and the filter (particle size range < 0.5 µm) were not included in the determination of the MMAD in order not to give undue weight to these values.
The Geomteric Standard Deviation (GSD) of the MMAD was calculated from the quotient of the 84.1 %- and the 50 %-mass fractions, both obtained from the above mentioned non-linear regression analysis.
In addition, a sample of approx. 10 g test material was taken from the exposure chamber to determine the median physical particulate size with a CILAS 715 by My-Tec, 91325 Adelsdorf, Germany. This determination was non-GLP.
TEST ATMOSPHERE
- Brief description of analytical method used: the actual dust concentration in the inhalation chamber was measured gravimetrically with an air sample filter (Minisart SM 17598 0.45 µm) and pump (Vacuubrand, MZ 2 C (Membrane Pump, Vacuubrand GmbH + Co. KG, 97877 Wertheim/Main, Germany)) controlled by a rotameter. Dust samples were taken once every hour during the exposure. For that purpose, a probe was placed close to the animals' noses and air was drawn through the air sample filter at a constant flow of air of 5 L/min for 1 minute. The filters were weighed before and after sampling (accuracy 0.1 mg). The correct loading of the filter was checked by the airflow via the rotameter and by a positive weight increase of the filter after the sampling period of 1 minute.
- Samples taken from breathing zone: yes
TEST ATMOSPHERE
- MMAD (Mass median aerodynamic diameter) / GSD (Geometric st. dev.):
Main study:
5.07 +/- 0.01 mg/L air concentration: MMAD: 3.129 µm; GSD: 3.00 µm
1.07 +/- 0.01 mg/L air concentration: MMAD: 3.241 µm; GSD: 2.92 µm
Satellite group:
5.04 +/- 0.02 mg/L air concentration: MMAD: 3.219 µm; GSD: 2.99 µm
1.06 +/- 0.02 mg/L air concentration: MMAD: 2.919 µm; GSD: 2.75 µm - Analytical verification of test atmosphere concentrations:
- yes
- Remarks:
- please refer to "details on inhalation exposure" above
- Duration of exposure:
- 4 h
- Concentrations:
- Main study:
actual concentration: 5.07 +/- 0.01 mg/L air concentration and 1.07 +/- 0.01 mg/L air concentration
nominal concentration: 6.11 mg/L air and 1.67 mg/L air
Satellite group:
actual concentration: 5.04 +/- 0.02 mg/L air concentration and 1.06 +/- 0.02mg/L air concentration
nominal concentration: 6.11 mg/L air and 1.67 mg/L air - No. of animals per sex per dose:
- Main study:
5.07 mg/L air concentration: 3 males / 3 females
1.07 mg/L air concentration: 5 males / 5 females
Satellite group:
5.04 mg/L air concentration: 3 males / 3 females
1.06 mg/L air concentration: 3 males / 3 females - Control animals:
- no
- Details on study design:
- - Duration of observation period following administration: 24 hours (satellite group) and 14 days (main study)
- Frequency of observations and weighing: during and following exposure, observations were made and recorded systematically; individual records were maintained for each animals. Careful clinical examinations were made at least twice daily until all symptoms subsided, thereafter each working day. Observations on mortality were made at least once daily (in the morning starting on test day 2) to minimize loss of animals to the study, e.g. necropsy or refrigeration of those animals found dead and isolation or sacrifice of weak or moribund animals.
Cageside observations included, but were not limited to: changes in the skin and fur, eyes, mucous membranes, respiratory, circulatory, autonomic and central nervous system, as well as somatomotor activity and behaviour pattern.
Particular attention was directed to observation of tremor, convulsions, salivation, diarrhoea, lethargy, sleep and coma. The animals were also observed for possible indications of respiratory irritation such as dyspnoea, rhinitis etc..
Individual weights of animals were determined once during the acclimatisation period, before the exposure on test day 1, on test days 2, 8 and 15 and at death. Changes in weight were calculated and recorded when survival exceeded one day. At the end of the test, all surviving animals were weighed and sacrificed.
- Necropsy of survivors performed: yes
Necropsy of all main study and satellite animals (8 + 6 males and 8 + 6 females) was carried out and all gross pathological changes were recorded:
- satellite animals: necropsy at 24 hours after cessation of exposure, as this is likely to be the time at which any signs of respiratory irritation would have manifested;
- main study animals: necropsy at the end of the 14- day observation period, also to assess whether any respiratory tract irritation persist or abates.
Autopsy and macroscopic inspections of rats which died prematurely were carried out as soon as possible after exitus.
Histopathology:
All main study and satellite animals were subjected to the same level of histopathological examination upon necropsy at the end of the respective observation period. During histopathology, attention was paid to alterations that might be indicative of respiratory irritation, such as hyperaemia, oedema, minimal inflammation, thickened mucous layer.
The following organs of all animals were fixed in 10 % (nose, i.e. head without brain, eyes and lower jar) or 7 % (other organs) buffered formalin for histopathological examination:
- nose (5 levels of the nasal turbinates): the tip and Level 1 of the nose were taken from the cut just anterior to the incisor teeth. With tip removed, Level 2 was taken approximately 2 mm posterior to free tip of the incisor teeth. Level 3 was cut through the incisive papilla. Level 4 was cut through the middle of the second palatal ridge, which is located just anterior to the molar teeth. Level 5 was cut through the middle of the molar teeth. All sections were embedded face down to yield a section from the anterior section, except the nose tip was embedded posterior surface down.
- larynx
- trachea
- lungs (five levels)
Paraffin sections were prepared of all above mentioned organs and stained with haematoxylin eosin. - Statistics:
- Due to low mortality and small number of animals at the lethal concentration no LC50 calculation according to FINNEY was carried out.
Results and discussion
Effect levels
- Sex:
- male/female
- Dose descriptor:
- LC50
- Effect level:
- > 5 mg/L air (analytical)
- Based on:
- test mat.
- Exp. duration:
- 4 h
- Mortality:
- Main study
2 of 3 males died at the 5.07 mg/L air concentration level on test days 3 and 4, respectively.
No mortality occurred at the 1.07 mg/L air concentration level
Satellite group:
No mortality occurred at the 5.04 or 1.06 mg/L air concentration level. - Clinical signs:
- other: Main study A 4-hour inhalation exposure to cobalt resinate at a concentration of 5.07 mg/L air revealed slight ataxia, slight to moderate tremor and slight dyspnoea (reduced frequency of respiration with increased volume) on test day 1 immediately after e
- Body weight:
- Body weight gain of the surviving animals was in the expected range.
- Gross pathology:
- Oedematous, dark-red stained discoloured lungs or lungs with large red-brown areas were observed in the two prematurely deceased male animals or lungs with white foci in the survivng male animal at the dose level of 5.07 mg/L of the main study (14-day sacrifice). The respective female animals of this dose level did not show any pathological findings. Red foci in the lungs were observed in all 3 of 3 male and 3 of 3 female satellite animals (24-hour sacrifice) at dose level of 5.04 mg/L. At the dose level of 1.07 mg/L none of the 5 of 5 male or 5 of 5 female animals of the main study (14-day sacrifice) showed any pathological findings. All 3 of 3 male and 3 of 3 female satellite animals ( 24-hour sacrifice) revealed slightly haemorrhagic lungs at the dose level of 1.06 mg/L.
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- LC50 (male and female rats, 4 hours) > 5 mg/L air
Based on the results of the histopathological and macroscopic investigations, cobalt resinate does not require classification for respiratory irritation.
According to the EC Regulation No. 1272/2008 and subsequent regulations, cobalt resinate does not require classification for acute inhalation toxicity or specific target organ toxicity -single exposure.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)