Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 603-080-0 | CAS number: 125572-93-2
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 22 May 2018 - 25 May 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 431 (In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method)
- Version / remarks:
- 29 July 2016
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: EU Method B.40 BIS (In Vitro Skin Corrosion: Human Skin Model Test)
- Version / remarks:
- 31 May 2008
- Deviations:
- no
- GLP compliance:
- yes
Test material
- Reference substance name:
- (6S)-6-{propyl[2-(thiophen-2-yl)ethyl]amino}-5,6,7,8-tetrahydronaphthalen-1-ol hydrochloride
- EC Number:
- 603-080-0
- Cas Number:
- 125572-93-2
- Molecular formula:
- C19H25NOS*HCl
- IUPAC Name:
- (6S)-6-{propyl[2-(thiophen-2-yl)ethyl]amino}-5,6,7,8-tetrahydronaphthalen-1-ol hydrochloride
- Test material form:
- solid: particulate/powder
- Details on test material:
- - Appearance: White powder
- Storage condition of test material: At room temperature
Constituent 1
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- skin obtained from plastic surgery from multiple donors
- Details on animal used as source of test system:
- EpiDerm™ Reconstructed Human Epidermis
- All cells used to produce Eipderm™ are purchased or derived from tissue obtained by MatTek Corporation from acredited institutions.
- Cells are screened for potential biological contaminants (HIV-1, Hepatitis B, Hepatitis C, bacteria, yeast and fungi) - Justification for test system used:
- Recommended test system in international guidelines (OECD and EC).
- Vehicle:
- other: the skin was moistened with 25 µL Milli-Q water (Millipore Corp.) to ensure close contact of the test item to the tissue
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDerm Skin Model (EPI-200)
- Tissue lot number: 28368, kit I and J
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure (3 minutes): room temperature
- Temperature used during treatment / exposure (1 hour): in a controlled environment at 37.0 ± 1.0°C
REMOVAL OF TEST MATERIAL
- After the exposure period, the tissues were washed with phosphate buffered saline to remove residual test item.
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1 mg/mL
- Incubation time: 3 h (at 37.0 ± 1.0°C)
- Spectrophotometer: TECAN Infinite® M200 Pro Plate Reader
- Wavelength: 570 nm
NUMBER OF REPLICATE TISSUES: 2 replicates per exposure duration
CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
- Two freeze-killed tissues were treated with test item and two freeze-killed non treated tissues were used per exposure time for the cytotoxicity evaluation with MTT
- N. of replicates: 2 replicates per exposure duration
- Method of calculation used: The mean OD570 values of the test item were corrected for the non-specific MTT reduction by the test item
(0.92% and 3.06% of the negative control tissues after 3 minutes and 1 hour treatment, respectively).
ACCEPTANCE OF RESULTS:
The in vitro skin corrosion test is considered acceptable if it meets the following criteria:
a) The absolute mean OD570 of the negative control tissues should be within the acceptance limits of OECD 431 (lower acceptance limit ≥0.8 and upper acceptance limit ≤2.8) and should reasonably be within the laboratory historical control data range.
b) The mean relative tissue viability following 1-hour exposure to the positive control should be < 15%.
c) In the range of 20 – 100% viability, the Coefficient of Variation (CV) between tissue replicates should be ≤ 30%.
d) The non-specific MTT reduction should be <= 30% relative to the negative control OD.
DECISION CRITERIA
A test item is considered corrosive in the in vitro skin corrosion test if:
a) The relative mean tissue viability obtained after 3-minute treatment compared to the negative control tissues is decreased below 50%.
b) In addition, a test item considered non-corrosive (viability ≥ 50%) after the 3-minute treatment is considered corrosive if the relative tissue viability after 1-hour treatment with the test item is decreased below 15%.
A test item is considered non corrosive in the in vitro skin corrosion test if:
a) The relative mean tissue viability obtained after the 3-minute treatment compared to the negative control tissues is not decreased below 50%.
b) In addition, the relative tissue viability after the 1-hour treatment is not decreased below 15%. - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- yes, concurrent MTT non-specific colour control
- other: concurrent control for MTT reduction by test item
- Amount/concentration applied:
- TEST MATERIAL
26.9 to 41.8 mg - Duration of treatment / exposure:
- 3-minute and 1-hour
Results and discussion
In vitro
Resultsopen allclose all
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 3-minute exposure
- Value:
- 119
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 1-hour exposure
- Value:
- 86
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Direct-MTT reduction: Yes
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: Yes
- Acceptance criteria met for positive control: Yes (5.8%)
- Acceptance criteria met for variability between replicate measurements: Yes (<9%)
- The non-specific MTT reduction was <=30% relative to the negative control (0.92% and 3.06%)
Applicant's summary and conclusion
- Interpretation of results:
- other: GHS and CLP criteria not met
- Conclusions:
- The in vitro skin corrosion test was conducted according to OECD 431 guideline and GLP principles.
It is concluded that this test is valid and that the substance is not corrosive in the in vitro skin corrosion test. - Executive summary:
In an in vitro skin corrosion test using a human skin model (EpiDerm Skin Model), the influence of the substance on the viability of human skin was tested according to OECD 431 (2016) and GLP principles. The substance was applied directly to 0.6 cm2 cultured skin (26.9 to 41.8 mg, in presence of 25 μL Milli-Q water). Negative and positive controls were included. After 3 -minute and 1 -hour treatments the substance was removed and the viability of the cells was tested by reduction of MTT. In addition two freeze-killed tissues treated with test item and two freeze-killed negative control treated tissues were used for the cytotoxicity evaluation with MTT at each time point, as it was found that the test item interacted directly with the MTT endpoint. Viability of unexposed skin was set at 100%. The relative mean tissue viability obtained after 3-minute and 1-hour treatments with the substance compared to the negative control tissues was 119% and 86%, respectively. After correction for the non-specific MTT reaction by the test item. The positive control had a mean cell viability of 5.8% after 1 hour exposure. The acceptability criteria of the study were met. Since the mean relative tissue viability was not below 50% after the 3-minute treatment and not below 15% after the 1-hour treatment, it can be concluded that the substance is not corrosive in the in vitro skin corrosion test.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)