Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
explosive properties of explosives
Type of information:
experimental study
Adequacy of study:
key study
Study period:
09 February 2010 – 17 March 2010
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Remarks:
in accordance with GLP
Qualifier:
according to guideline
Guideline:
EU Method A.14 (Explosive properties)
Deviations:
no
Qualifier:
according to guideline
Guideline:
other: United Nations (UN), UN no. ST/SG/AC.10/11/Rev.4: Recommendations on the Transport of Dangerous Goods, Part I: Classification Procedures, Test Methods and Criteria Relating to Explosives of Class 1, Section 13: “Test Series 3”, 2003.
Deviations:
no
Qualifier:
according to guideline
Guideline:
other: United Nations (UN), UN no. ST/SG/AC.10/11/Rev.4: Recommendations on the Transport of Dangerous Goods, Appendix 6: “Screening Procedures”, 2003.
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Key result
Parameter:
other: Explosive (not specified)
Remarks on result:
negative (not further specified)

In the DSC-curve obtained with the first experiment a small exothermic peak between 375°C and 450°C was observed. This was followed by an endothermic peak. This effect was most likely obtained due to evaporation of the test substance from the expanded and torn sample container. After the experiment, a black residue was visible on the outside of the sample container

To investigate the exothermic peakbetween 375°C and 450°C a smaller sample was used in the second experiment. In the DSC-curves obtained no exothermic peak could be observed. After the experiment, the sample container was intact. In the container, a brown residue was observed.

Interpretation of results:
non explosive
Remarks:
Migrated information
Conclusions:
The potential explosive properties of Standolized linseed oil were determined using differential scanning calorimetry (DSC). No exothermic decomposition reactions above 500 J/g with a temperature onset under 500°C could be observed. Therefore it is concluded that Standolized linseed oil is not explosive.

Description of key information

Standolized linseed oil is not explosive.

Key value for chemical safety assessment

Explosiveness:
non explosive

Additional information

The potential explosive properties of Standolized linseed oil were determined using differential scanning calorimetry (DSC). No exothermic decomposition reactions above 500 J/g with a temperature onset under 500°C could be observed. Therefore it is concluded that Standolized linseed oil is not explosive.

Justification for classification or non-classification

The substance does not need to be classified for explosiveness, as no explosive properties were observed.