Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 249-978-2 | CAS number: 29964-84-9
Guidance on Safe Use
Administrative data
First-aid measures
General advice
First aider needs to protect himself. Take off all contaminated clothing immediately. Medical treatment is necessary if symptoms occur which are obviously caused by skin or eye contact with the product or by inhalation of its vapours.
Inhalation
Move subject to fresh air and keep him calm. In case of discomfort: Supply with medical care.
Skin contact
Wash off immediately with soap and water. If skin irritation occurs consult a physician.
Eye contact
Flush eyes thoroughly with a large amount of water and consult a physician.
Ingestion
Do not induce vomiting. Call a physician immediately.
Most important symptoms and effects, both acute and delayed
None known.
ndication of any immediate medical attention and special treatment needed hazards
No data available.
Treatment
Treat symptomatically.
Fire-fighting measures
General Fire Hazards
Keep out unprotected persons. Containers exposed to heat (fire) may build up pressure. Cool by splashing with water. Closed container may rupture if strongly heated. Prevent fire extinguishing water from contaminating surface water or the ground water system. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Suitable extinguishing media
foam Dry chemical. Carbon dioxide
Unsuitable extinguishing media
High volume water jet
Special hazards arising from the substance or mixture
May be released in case of fire: carbon monoxide, carbon dioxide, organic products of decomposition.
Special fire fighting procedures
Keep away from sources of ignition - No smoking. Take action to prevent static discharges. In the event of fire, cool the endangered containers with water. When heated above the flash point and/or during spraying (atomizing), ignitible mixtures may form in air. Vapours are heavier than air and can form an explosive mixture with air. Use only explosion-proof equipment.
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Assure sufficient ventilation. Use personal protective clothing. Keep away sources of ignition. Do not breathe vapours or spray mist. Use breathing apparatus if exposed to vapours/dust/mist/aerosol. Do not eat, drink or smoke when using this product. Wash hands thoroughly with soap and water after handling.
For non-emergency personnel:
No data available.
For emergency responders:
No data available.
Environmental Precautions:
Prevent product from getting into drains/surface water/groundwater. Contain spilled product and prevent any contamination of soil, the sewer system or water bodies. If the product contaminates rivers and lakes or drains inform respective authorities. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Methods and material for containment and cleaning up:
Larger quantities: Remove mechanically (by pumping). Use explosion-proof equipment! Smaller quantities and/or residues: Contain with absorbent material (e.g. sand, diatomaceous earth, acid absorbent, universal absorbent or sawdust). Dispose of in accordance with regulations.
Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Do not breathe vapors. Do not eat, drink or smoke during use. Keep away from sources of ignition - No smoking. Take action to prevent static discharges. In the event of fire, cool the endangered containers with water. When heated above the flash point and/or during spraying (atomizing), ignitible mixtures may form in air. Vapours are heavier than air and can form an explosive mixture with air. Use only explosion-proof equipment. Ensure there is good room ventilation. Keep container tightly closed.
Conditions for safe storage, including any incompatibilities
Keep only in the original container at a temperature not exceeding 30 °C.Protect from the action of light. Fill the container by approximately 90 % only as oxygen (air) is required for stabilisation. With large storage containers make sure the oxygen (air) supply is sufficient to ensure stability.Can polymerize with intense heat release.
Specific end use(s)
We are unaware of any specific end uses which go beyond the data reported in Section 1.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 3082
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN 3082
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 3082
Shipping information
- Proper shipping name and description:
- Environmentally hazardous substance, liquid, N.O.S.
- Chemical name:
- Isodecylmethacrylate
- Labels:
- No. 9
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN 3082
Shipping information
- Proper shipping name and description:
- Environmentally hazardous substance, liquid, N.O.S.
- Chemical name:
- Isodecylmethacrylate
- Labels:
- No. 9MI
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Appropriate Engineering Controls
For monitoring procedures refer for instance to "Empfohlene Analysenverfahren für Arbeitsplatzmessungen", Schriftenreihe der Bundesanstalt für Arbeitsschutz and "NIOSH Manual of Analytical Methods", National Institute for Occupational Safety and Health
Eye/face protection
Ensure that eyewash stations and safety showers are close to the workstation location. tightly fitting goggles
Hand Protection
Material: butyl rubber gloves
Break-through time: 60 min
Glove thickness: 0.7 mm
Guideline: EN 374
Additional Information: Gloves should be replaced regularly, especially after extended contact with the product., For each work-place a suitable glove type has to be selected.
Additional Information: neoprene gloves, Suitable as spray protection.
Skin and Body Protection
On handling of larger quantities: face mask, chemical-resistant boots and apron
Respiratory Protection
Self-contained breathing apparatus. short term: filter appliance, filter A
Hygiene measures
Store work clothing separately. Take off all contaminated clothing immediately. Follow the usual good standards of occupational hygiene. Clean skin thoroughly after work; apply skin cream.
Stability and reactivity
Reactivity
No data available.
Chemical Stability
No decomposition if used as directed.
Possibility of hazardous reactions
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions.
Conditions to avoid
Ultraviolet light. Solar radiation, heat, heat exposure, spark formation. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution.
Incompatible Materials
Peroxides, amines, sulfur compounds, heavy metal ions, alkalis, reducing agents and oxidizing agents. Mineral Acid Free radical initiators.
Hazardous Decomposition Products
None when used as directed.
Disposal considerations
Waste treatment methods
General information
Dispose of waste and residues in accordance with local authority requirements.
Disposal methods
Waste is hazardous. It must be disposed of in accordance with the regulations after consultation of the competent local authorities and the disposal company in a suitable and licensed facility. Strictly controlled conditions during disposal or treatment to air, wastewater and waste. Do not add wastewater to a biological wastewater treatment plant Bring wastewater containing AOX for professional disposal. The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.
Contaminated Packaging
Contaminated packaging should ideally be emptied; it can then be recycled after having been decontaminated. Packaging that cannot be cleaned should be disposed of professionally. Uncontaminated packaging may be taken for recycling.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
