Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-541-9 | CAS number: 1472634-24-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 02 FEB - 16 MAR 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 012
- Report date:
- 2012
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying Ocular Corrosives and Severe Irritants)
- Version / remarks:
- 7 SEP 2009
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Version / remarks:
- 30 MAY 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- sodium 1,5-dioxo-1,5-bis({[1-(2,2,3,3,3-pentafluoropropoxy)butan-2-yl]oxy})-3-({[1-(2,2,3,3,3-pentafluoropropoxy)butan-2-yl]oxy}carbonyl)pentane-2-sulfonate
- EC Number:
- 700-541-9
- Cas Number:
- 1472634-24-4
- Molecular formula:
- C27H34F15NaO12S
- IUPAC Name:
- sodium 1,5-dioxo-1,5-bis({[1-(2,2,3,3,3-pentafluoropropoxy)butan-2-yl]oxy})-3-({[1-(2,2,3,3,3-pentafluoropropoxy)butan-2-yl]oxy}carbonyl)pentane-2-sulfonate
- Test material form:
- solid
Constituent 1
Test animals / tissue source
- Species:
- cattle
- Details on test animals or tissues and environmental conditions:
- TEST ANIMALS
- Source: slaughterhouse (Odenwaldschlachthof Brensbach, D-64395 Brensbach)
Freshly isolated bovine eyes of donor cattle. Excess tissue was removed from the eyes. The eyes were kept and transported in transport medium.
Test system
- Vehicle:
- other: 0.9% sodium chloride solution
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Concentration (if solution): 20 % in 0.9 % sodium chloride
VEHICLE
- Amount(s) applied (volume or weight with unit): 750 µL
- Concentration (if solution): 0.9 %
- Lot/batch no. (if required): 0191C15 - Duration of treatment / exposure:
- incubation for 240 min
- Duration of post- treatment incubation (in vitro):
- permeability determination: 90 min
- Number of animals or in vitro replicates:
- 3
- Details on study design:
- SELECTION AND PREPARATION OF CORNEAS
The corneas were prepared immediately after delivery of the eyes to the laboratory. All eyes were carefully examined macroscopically for defects. Those presenting defects such as vascularization, pigmentation, opacity or scratches were discarded. The corneas were carefully removed from the eyes using scalpel and rounded scissors. A rim of about 2 mm of tissue (sclera) was left for stability and handling of the isolated cornea. All corneas used in the study were collected in incubation medium (EMEM, pre-warmed at 32 °C).
Each cornea was mounted in a cornea holder (LAB Research, Hungary) with the endothelial side against the sealing ring (0-ring) of the posterior part of the holder. The cornea was gently flattened over the 0-ring without stretching the cornea. Afterwards, the anterior part of the holder was positioned on top of the cornea and fixed in place with screws. Both compartments of the holder were filled with incubation medium (EMEM). The posterior compartment was filled first to return the cornea to its natural convex form.
QUALITY CHECK OF THE ISOLATED CORNEAS
Yes, Opacity Measurement before Treatment:
The opacitometer measured the light transmission passing through the corneas and displayed a lux value. This value was recorded in a table and converted into an opacity value (baseline opacity values). The opacitometer was calibrated as described in the manual and the measured values were within the range of the acceptance criteria. The opacity of each cornea was determined by reading each holder placed in the photoreceptor compartment of the opacitometer. Any corneas that showed macroscopic tissue damage (e.g., scratches, pigmentation, neovascularization) or an opacity > 7 opacity units were discarded. The mean opacity of all equilibrated corneas was calculated. Three corneas with opacity values close to the median value for all corneas as were selected as negative control corneas. The remaining corneas were distributed into treatment and positive control groups.
NUMBER OF REPLICATES
3
NEGATIVE CONTROL USED
yes, see solvent control
SOLVENT CONTROL USED (if applicable)
yes, 0.9 % sodium chloride solution
POSITIVE CONTROL USED
yes, Imidazole
APPLICATION DOSE AND EXPOSURE TIME
Test material: 20 % suspension in 0.9 % sodium chloride, 240 min
Solvent control: 0.9 % sodium chloride, 240 min
Positive control: 20 % Imidazole solution, 240 min
POST-INCUBATION PERIOD: 90 min (for permeability determination)
REMOVAL OF TEST SUBSTANCE
- Number of washing steps after exposure period: at least 3 (or until no visual evidence of test chemical can be observed)
- POST-EXPOSURE INCUBATION: no
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity: baseline opacity was determined with an opacitometer (BASF-OP2.0)
- Corneal permeability: passage of sodium fluorescein dye measured with the aid of microtiter plate reader (BioTek ELx800) (OD490)
SCORING SYSTEM: In Vitro Irritancy Score (IVIS)
DECISION CRITERIA: A substance that induced an IVIS ≥ 55.1 is defined as a corrosive or a severe irritant.
VALIDITY CRITERIA: The test is acceptable if the IVIS of the positive control and the negative control falls within two standard deviations of the current historical mean (IVIS positive control: 90.2 - 148.5; IVIS negative control: -0.9 - 4.2).
Results and discussion
In vitro
Resultsopen allclose all
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- 1
- Value:
- 5.879
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- 2
- Value:
- 3.991
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- 3
- Value:
- 4.233
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- mean
- Value:
- 4.7
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- cornea opacity score
- Run / experiment:
- 1
- Value:
- 4.851
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- cornea opacity score
- Run / experiment:
- 2
- Value:
- 3.913
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- cornea opacity score
- Run / experiment:
- 3
- Value:
- 1.109
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- fluorescein retention score
- Run / experiment:
- 1
- Value:
- 0.069
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- fluorescein retention score
- Run / experiment:
- 2
- Value:
- 0.005
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
- Irritation parameter:
- fluorescein retention score
- Run / experiment:
- 3
- Value:
- 0.208
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Remarks:
- see vehicle control
- Positive controls validity:
- valid
Any other information on results incl. tables
Validity of the Test
After treatment with the negative control (0.9% sodium chloride solution) the calculated IVIS was 1.1 and, thus, within two standard deviations of the current historical mean (IVIS: -0.9 - 4.2). After treatment with the positive control (20% Imidazole) the calculated IVIS was 94. 7 and, thus, also within two standard deviations of the current historical mean (IVIS 90.2 - 148.5). Therefore, the study fulfilled the validity criteria.
Purpose
Thisin vitroGLP study was performed to assess the ocular severe irritant or corrosive potential of the test item by means of the BCOP (Bovine Corneal Opacity and Permeability Assay) according to OECD Guideline 437 and the Commission Regulation (EU) No. 1152/2010.
For this purpose fresh bovine corneas were exposed to a 20% suspension of the test material and toxic effects to the cornea were measured by decreased light transmission (opacity) and increased passage of sodium fluorescein dye (permeability). The opacity and permeability assessments of the corneas were combined to determine anIn VitroIrritancy Score (IVIS), which was used to classify the irritancy potential of the test material.
Study Design
In this study the induced opacity and increased permeability was investigated in isolated bovine corneas after exposure to the test material as a 20% suspension in a 0.9% sodium chloride solution. As negative control 0.9% sodium chloride solution and as positive control 20% imidazole was used. 3 corneas were used per group (test material, negative and positive control group). After a first opacity measurement of the fresh bovine corneas, 750 µL of the suspended test material, positive or negative control were applied on the corneas and incubated for 240 minutes at 32 ± 1 °C. After the incubation phase the test material, the positive, and the negative control were rinsed from the corneas and the opacity was measured again. After the opacity measurements, the permeability of the corneas was determined by application of 1 mL of a fluorescein solution for 90 minutes at 32 ± 1 °C. The amount of fluorescein solution that crossed the cornea was measured spectrophotometrically. The opacity and permeability assessments were combined to determine an In Vitro Irritancy Score (IVIS).
Results
The treatment of the corneas with the negative control (0.9% sodium chloride solution) showed neither an increase of opacity nor an increase of permeability. After treatment with the positive control (20% imidazole) the calculated IVIS was 94.7 and, thus, within two standard deviations of the current historical mean (IVIS: 90.2 - 148.5). Therefore, the study fulfilled the validity criteria. The IVIS obtained after treatment with the test material was 4.7 and, thus, lower than 55.1. Therefore, the test material is not considered to possess an ocular severe irritant or corrosive potential.
Conclusions
Under the given experimental conditions, the test material did not show an ocular severe irritant or corrosive potential.
Applicant's summary and conclusion
- Interpretation of results:
- other: not Category 1 (irreversible effects on the eye) based on EU GHS criteria
- Conclusions:
- The IVIS obtained after treatment with the test material was 4.7 and, thus, lower than 55.1. Therefore, the test material is not considered to possess an ocular severe irritant or corrosive potential.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.