Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice: No hazards which require special first aid measures

If inhaled: If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician

In case of skin contact:

Take off contaminated clothing and shoes immediately.

Wash off with soap and plenty of water.

If symptoms persist, call a physician.

In case of burns apply cold water until pain subsides then seek medical advice

In case of eye contact:

Flush eyes with water as a precaution.

Remove contact lenses.

Protect unharmed eye.

Keep eye wide open while rinsing.

If eye irritation persists: Get medical advice/ attention.

If swallowed:

Clean mouth with water and drink afterwards plenty of water.

Do not give milk or alcoholic beverages.

Never give anything by mouth to an unconscious person.

If symptoms persist, call a physician.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames

Unsuitable extinguishing media: Do NOT use water jet.

Special hazards arising from the substance or mixture

Combustibility: Not classified as flammable or combustible, but will combust if ignited.

Hazardous combustion products: Metal oxides / Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke) / Nitrogen oxides (NOx) / Sulphur oxides

Advice for firefighters

Protective equipment and precautions for firefighters: In the event of fire, wear self-contained breathing apparatus.

Fire Fighting Instructions: Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment

Accidental release measures

Personal precautions

Advice for emergency responders

Ensure adequate ventilation.

Use personal protective equipment.

Material can create slippery conditions

Advice for non-emergency personnel

Avoid contact with spilled material. Do not touch or walk through spilled material.

Environmental precautions

No Exposure Scenario annex is attached to this safety data sheet. It is a non-classified mixture containing hazardous substances as detailed in Section 3; relevant information from Exposure Scenarios for the hazardous substances contained have been integrated into the core sections 1-16 of this SDS.

Prevent entry into waterways, sewers, basements or confined areas.

Do not flush into surface water or sanitary sewer system.

Prevent further leakage or spillage if safe to do so.

Try to prevent the material from entering drains or water courses.

If the product contaminates rivers and lakes or drains inform respective authorities.

Methods for cleaning up

Prevent further leakage or spillage if safe to do so.

Large Spills: Dyke far ahead of liquid spill for later recovery and disposal.

Recover by pumping or with suitable absorbent

Report spills as required to appropriate authorities.

Seek the advice of a specialist before using dispersants.

Dispose of according to local regulations.

In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.

Material will sink to the sediment layer

Remove debris in path of spill prior to oiling and remove contaminated debris from shoreline and water surface.

Wipe up with absorbent material (e.g. cloth, fleece).

Keep in suitable, closed containers for disposal.

Clean contaminated floors and objects thoroughly while observing environmental regulations.

Handling and storage

Precautions for safe handling

Smoking, eating and drinking should be prohibited in the application area.

Dispose of rinse water in accordance with local and national regulations.

Normal measures for preventive fire protection.

Products may load from manufacturing site above the standard loading/unloading range.

Loading/unloading temperature:

45 °C (113 ° F) - 70 °C (158 ° F)

Viscosity @ Loading/unloading temperature:

450 cSt - 1.200 cSt

Static accumulator:

This material is not a static accumulator

Conditions for safe storage, including any incompatibilities

Keep container tightly closed in a dry and well-ventilated place.

No decomposition if stored and applied as directed.

Storage temperature: 60 °C (140 ° F) - 70 °C (158 ° F)

Incompatible materials and coatings: butyl-rubber

Specific use: This material should not be used for any other purpose than that recommended without expert advice.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transport by land
Shippingopen allclose all
Labels:
Not regulated for transport by land
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for inland waterwat transport
Shippingopen allclose all
Labels:
Not regulated for inland waterwat transport
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transport by sea under IMDG code
Shipping information
Proper shipping name and description:
Not regulated for transport by sea under IMDG code
Chemical name:
Not regulated for transport by sea under IMDG code
Labels:
Not regulated for transport by sea under IMDG code
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transport by air
Shipping information
Proper shipping name and description:
Not regulated for transport by air
Chemical name:
Not regulated for transport by air
Labels:
Not regulated for transport by air
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment.

Respiratory protection: No personal respiratory protective equipment normally required.The applicable European standard can be found in EN 140,EN 137, EN 143, EN 14387.

Hand protection: Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves. For prolonged or repeated contact use protective gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Eye/face protection: Safety glasses. The applicable European standard can be found in EN 166.

Skin and body protection: Long sleeved clothing. The applicable European standard can be found in EN 14605.

Stability and reactivity

Chemical stability: Stable under recommended storage conditions.

Reactivity: No dangerous reaction known under conditions of normal use.

Hazardous reactions: No hazards to be specially mentioned.

Conditions to avoid: Excessive heat.

Incompatible materials: Strong oxidizing agents

Hazardous decomposition products: No decomposition if used as directed.

Disposal considerations

Dispose of contents/ container to an approved waste disposal plant.

Disposal recommendations based on material as supplied, Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal

For the safety of persons conducting disposal, recycling or reclamation activities, refer to the information in Section: Exposure control and personal protection.