Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: -
CAS number: -
The pressure readings (P1and
P2) and the calculated volume for the calibration ball are
shown in the following table:
Certified Volume (cm3)
The pressure readings, calculated
volumes and density values obtained for the test material are shown in
the following table:
1.40 x 103
1.42 x 103
Temperature: 21.0 ± 0.5ºC
Mean density: 1.41 x 103 kg/m3
Relative density: 1.41
1.41 at 21.0 ± 0.5°C, using a gas
comparison pycnometer, Method A3 Relative Density of
Commission Regulation (EC) No 440/2008 of 30 May 2008.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again