Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information: Immediately remove any clothing soiled by the product.

After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Immediately wash with water and soap and rinse thoroughly.

After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing: If symptoms persist consult doctor.

Information for doctor: No specific symtoms known.

Eyes: Dust may irritate eyes mechanically.

Hazards and systemic effects: No specific hazards known.

Possible routes of intake: Intake by swallowing or inhalation of dust.

Indication of any immediate medical attention and special treatment needed: No specific antidote. Symptomatic treatment.

Fire-fighting measures

Suitable extinguishing agents: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

For safety reasons unsuitable extinguishing agents: No restriction in large fires

Special hazards arising from the substance or mixture: In case of fire, the following can be released:

Carbon monoxide (CO)

Nitrogen oxides (NOx)

Advice for firefighters

Protective equipment: Wear self-contained respiratory protective device.

Chemical resistant protective suit. Under the protective suit a fire protective suit according to EN 469 should be applied.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Wear protective clothing.

Use respiratory protective device against the effects of fumes/dust/aerosol.

Avoid formation of dust.

Environmental precautions: Keep contaminated washing water and dispose of appropriately.

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Methods and material for containment and cleaning up: Pick up mechanically. If formation of dust cannot be avoided use respiratory filter device.

Handling and storage

Precautions for safe handling: Fill only in dedicated and assigned containers.

Keep containers tightly sealed.

Requirements to be met by storerooms and receptacles: Store in a dry location, keep away from humidity.

Store in a cool location.

Corrosion of metals: It should generally be borne in mind that there is a possibility of corrosion on contact with this material. Resistance

should be checked in each individual case.

Information about storage in one common storage facility: Store away from oxidising agents.

Further information about storage conditions: Protect from heat and direct sunlight.

Recommended storage temperature: 11-25 °C.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
-
Shippingopen allclose all
Labels:
-
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
-
Shippingopen allclose all
Labels:
-
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
-
Shipping information
Proper shipping name and description:
-
Chemical name:
-
Labels:
-
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
-
Shipping information
Proper shipping name and description:
-
Chemical name:
-
Labels:
-
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical facilities: Take care of sufficient ventilation. Avoid formation of dust.

Respiratory protection: Particle fi lter. The fi lter grade (P1 - P3) has to be established depending on work-place related limit values and the actual exposition.

Protection of hands: Selection of the glove material on consideration of the penetration

times, rates of diffusion and the degradation.

For the permanent contact gloves made of the following materials are suitable: rubber

Check for tightness before use. Replace damaged gloves.

Eye protection: Safety glasses

Body protection: Necessary protective suit has to be selected individually based on risk assessment.

Limitation and supervision of exposure into the environment: Avoid spillage of product into the environment.

If possible use this material only in closed systems and devices. Follow emission limit values. Measures in case of unwanted emissions should be established.

Risk management measures: General protective and hygienic measures have to be observed.

Handling and use of this material/formulation only under controlled conditions in closed systems.

Employees who use this material/formulation must be trained and demonstrably instructed about possible risks for man and environment.

Measures for prevention of hazards in case of unwanted leakage shall be implemented.

Stability and reactivity

10.2 Chemical stability

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Incompatible materials: Strong oxidizing agents.

Hazardous decomposition products: Nitrogen oxides, Carbon monoxide and carbon dioxide

Disposal considerations

Waste treatment methods

Recommendation: Must be specially treated adhering to official regulations.

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

If possible recovery or recycling.