Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Toxicological information

Acute Toxicity: oral

Currently viewing:

Administrative data

Endpoint:
acute toxicity: oral
Type of information:
experimental study
Adequacy of study:
weight of evidence
Study period:
From August 01, 2017 to August 09, 2017
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
study well documented, meets generally accepted scientific principles, acceptable for assessment
Remarks:
Non-Regulatory Method. The test uses cultured human dermal fibroblasts in animal product-free culture, Neutral Red Uptake (NRU) method and a prediction model, based on the GHS classification system for acute toxicity

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2017
Report date:
2017

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
other: OECD Guideline 129: Guidance document on using cytotoxicity tests to estimate starting doses for acute oral systemic toxicity tests
Deviations:
not specified
Principles of method if other than guideline:
The Neutral Red Uptake (NRU) assay is used to determine cell viability as an indicator of acute toxicity. Neutral Red (a weak cationic dye), penetrates cellular membranes, entering cells via non-ionic diffusion and accumulates intracellularly in lysosomes. Viable cells take up and retain the Neutral Red (NR) dye, while damaged or dead cells do not, therefore, the Neutral Red Uptake (NRU) assay can be employed as a direct measure of cell viability, using membrane integrity as the measured end point. Incorporated NR is released from the cells using a solubilisation solution. The absorbance of the NR is quantified using a spectrophotometer.
GLP compliance:
yes (incl. QA statement)
Test type:
other: Neutral Red Uptake (NRU) Cytotoxicity Test using Human Dermal Fibroblasts in Xeno-Free Culture Conditions
Limit test:
no

Test material

Constituent 1
Chemical structure
Reference substance name:
Reaction mass of mono- and di- hexadecyl phosphate esters, potassium salts and phosphoric acid
Molecular formula:
C16H34O4P1K1 (representative: mono- C16 PSE, K+)
IUPAC Name:
Reaction mass of mono- and di- hexadecyl phosphate esters, potassium salts and phosphoric acid
Test material form:
solid: particulate/powder

Test animals

Species:
other: Cultured human dermal fibroblasts in animal product-free culture
Strain:
other: Not Applicable
Sex:
not specified
Details on test animals or test system and environmental conditions:
Neonatal human dermal fibroblast cultures – “Xeno-Free” (HDFn-XF) were obtained commercially as cryopreserved primary cells (Lifeline Cell Technology, Carlsbad, USA). They were originally derived from donor tissue with informed consent for the tissue to be used for research purposes, in adherence with the Human Tissue Act (UK) 2004. Xeno-free culture medium and sub-culture reagents (Lifeline Cell Technology, Carlsbad, USA) were free of animal-derived components, providing a fully human cell culture system.

Test system was extensively QC tested, by the manufacturer, for a range of parameters including viability upon thawing from cryopreservation, proliferation rate, morphology and sterility (absence of bacteria, fungal growth and mycoplasma). They were also demonstrated to be negative for HIV-1, HIV-2, HBV and HCV.

Administration / exposure

Route of administration:
other: Refer "Details on oral exposure"
Vehicle:
other: Serum-Free culture medium
Details on oral exposure:
1) Method of administration of test substance
A single application of 8 concentrations of the test substance (n=6) was applied in cell culture medium (dilution factor of 2 for the Range Finding Experiment; 1.2 for two Main Experiments (ME1 and ME3); and 1.5 for one Main Experiments (ME2)). The top concentration was previously determined by solubility testing.
Range finding experiment (μg/mL): 200, 100, 50, 25, 12.5, 6.3, 3.1, and 1.6
Main Experiments (ME1 and ME3) (μg/mL): 400, 333.3, 277.8, 231.5, 192.9, 160.8, 134.0, and 111.6 µg/mL
Main Experiment (ME2) (μg/mL): 200, 166.67, 138.89, 115.74, 96.45, 80.38, 66.98 and 55.82

2) Method of administration of reference substances:
a) Positive control: Sodium dodecyl sulphate (SDS) (Lot number: SLBL1461V, Expiry date: June 2020).
Concentration tested: 100, 83.3, 69.4, 57.9, 48.2, 40.2, 33.5, 27.9 μg/mL in cell culture medium (n = 6, dilution factor of 1.2)
b) Negative control: Fibrolife serum-free culture medium (Lot number: 05685, Expiry date: 31 Aug 17 for RFE, ME3, Sep 18 for ME1. 08 Sep 17 ME2)
A single application of culture medium was applied as the negative control (n=12).

3) Exposure times of test substances and reference substances:
The cells were incubated with the test or reference substance for 24 ± 1h, at 37°C / 5% CO2, 95% RH (Relative Humidity) followed by NRU measurements
Doses:
- Range Finding Experiment (RFE): Eight different concentration of test substance, with dilution factor of 2 were evaluated: 200, 100, 50, 25, 12.5, 6.3, 3.1, and 1.6 µg/mL
- Two Main Experiments (ME1 and ME3): 400, 333.3, 277.8, 231.5, 192.9, 160.8, 134.0, and 111.6 µg/mL (Dilution Factor 1.2)
- One Main Experiment (ME2): 200, 166.67, 138.89, 115.74, 96.45, 80.38, 66.98 and 55.82 µg/mL (Dilution Factor 1.5)

As per OECD guidance document 129, an initial range finding experiment (RFE) was performed with a range of concentrations based on the outcome of the solubility test (dilution factor of 2 was used) to determine a top concentration for three main experiments (ME) allowing the determination of a more accurate IC50.
No. of animals per sex per dose:
6 replicates for test substance and positive control
12 replicates for negative control
Control animals:
other: culture medium
Details on study design:
Overview
Preliminary testing: Determination of the top concentration by solubility testing
Range finding experiment (RFE): To determine a top concentration for the main experiment.

Main experiment (ME) x 3:
Day 1: Seeding cells (1 x 96-well plates for RFE; 3 x 96-well plate for ME).
Day 2: 24 h after seeding, apply test and reference substances for 24 ± 1h
Day 3: Evaluate the Neutral Red Uptake
Statistics:
Data Analysis for this study were performed following XCellR8 SOP L0064: “Neutral Red Uptake (NRU) Cytotoxicity Test Using Human Dermal Fibroblasts in Xeno-Free Culture Conditions”, using XCellR8 Form F0058: Acute Toxicity Analysis Spreadsheet v01, for processing. This is a Microsoft Excel workbook (created during the project funded by Innovate UK (project number 131726) and validated in-house in August 2017, containing formulae to process the raw data as per SOP L0064. The final data output is a percentage viability value for cells exposed to the test substance relative to the negative control and the IC50 value.

Results and discussion

Preliminary study:
As per OECD guidance document 129, an initial range finding experiment (RFE) was performed with a range of concentrations based on the outcome of the solubility test (dilution factor of 2 was used) to determine a top concentration for three main experiments (ME) allowing the determination of a more accurate IC50 (i.e. the concentration at which a decrease in cell viability of 50% was observed). Based on solubility data, top concentration used in the RFE was 0.2 mg/mL (200 µg/mL).

As all viability values obtained with the RFE were above 50%, and further solubility testing showed that the top concentration of 400 µg/mL (0.4 mg/mL) was soluble, two Main Experiments (ME1 and ME3) were performed with a top test substance concentration of 400µg/mL and a dilution factor of 1.2 and one (ME2) with a test substance top concentration of 200 µg/mL (0.2 mg/mL) with a dilution factor of 1.5.
Effect levelsopen allclose all
Key result
Dose descriptor:
other: IC50 (Test substance concentration that reduces cell viability to 50% of the negative control)
Remarks:
ME1; ME3
Effect level:
> 400 other: µg/mL
Based on:
test mat.
Remarks on result:
other: As the percentage viability obtained for all concentrations were above 50%, no IC50 was determined. Therefore IC50 value was considered to be greater than highest concentration tested (>400 µg/mL)
Remarks:
Equivalent predicted LD50: 300-2000 mg/kg bw; Potential EU CLP classification: Category 4
Key result
Dose descriptor:
other: IC50 (Test substance concentration that reduces cell viability to 50% of the negative control)
Remarks:
RFE, ME2
Effect level:
> 200 other: μg/mL
Based on:
test mat.
Remarks on result:
other: As the percentage viability obtained for all concentrations were above 50%, no IC50 was determined. Therefore IC50 value was considered to be greater than highest concentration tested (>200 µg/mL
Remarks:
Equivalent predicted LD50: 300-2000 mg/kg bw; Potential EU CLP classification: Category 4
Other findings:
In all assays, no cytotoxicity was observed, even at the top concentration. It was not possible to determine an IC50 value (or IC50 >400 µg/mL) as all percentage of viability obtained were above 50%. Therefore, the test substance was classified as GHS Category 4 “Harmful if swallowed”, suggesting a low acute toxicity potential.

Any other information on results incl. tables

Results

Solubility Results

The solubility was first determined following OECD guidance document 129 to determine the top concentration for the RFE:

Tier 1: 200 mg/mL in cell culture medium - Not soluble

Tier 2: 20 mg/mL in cell culture medium - Not soluble

Tier 3: 2 mg/mL in cell culture medium - Not soluble

Tier 3: 200 mg/mL in DMSO - Not soluble

Tier 3: 200mg/mL in Ethanol - Not soluble

Tier 4: 0.2mg/mL in cell culture medium - Soluble

Therefore the top concentration used in the range finding experiment (RFE) described here after was 0.2 mg/mL.

As no toxicity was observed in the RFE, further solubility testing was performed to determine a possible higher concentration to use in the Main Experiments (ME). 

Further solubility testing results are: 

200 mg/mL in DMSO - Not soluble

100 mg/mL in DMSO - Not soluble

1.5 mg/mL in cell culture medium - Not soluble

1 mg/mL in cell culture medium - Not soluble

0.8 mg/mL in cell culture medium - Not soluble

0.4 mg/mL in cell culture medium - Soluble

Therefore the concentration of 0.4 mg/mL in cell culture medium was used for ME1 and 3, while 0.2 mg/mL was used for ME2.

Range finding experiment

An initial Range finding experiment (RFE) was performed with a top test substance concentration of 200 μg/mL (0.2 mg/mL) and a dilution factor of 2. A positive control plate was run in parallel, to validate the assay with a top concentration of 100μg/mL and a dilution factor of 1.2.

Cell viability measurements 24 h± 1 h after application of test substance / positive control (SDS).

Positive Control-RFE

PC-RFE

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

86.6%

-0.1%

-0.4%

-0.3%

-0.1%

3.4%

58.2%

21.1%

45.9%

113.4%

SD

12.0%

0.7%

0.6%

1.0%

1.3%

1.8%

45.4%*

15.7%

12.2%

8.5%

% CV

13.83%

-576%

-143%

-351%

-1691%

52.23%

77.98%

74.33%

26.63%

7.45%

Table 1: Cell viability measurements 24 h ± 1 h after application of positive control (SDS). NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8: *SD value of the concentration 6 (40.2 µg/mL) is above 15% (45.4%), therefore C6 value (58.2%) was removed for IC50 calculation and graph. The calculated IC50 was 27.9 µg/mL which is within the range of the historical data obtained during the project funded by Innovate UK (project number 131726) in which the assay was set up (range 26.5-70.9 µg/mL).

Test Substance-RFE

TA1-RFE

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

200.0

100.0

50.0

25.0

12.5

6.3

3.1

1.6

0.0

% of Negative Control

95.4%

90.6%

92.0%

90.8%

97.2%

99.3%

94.1%

95.3%

91.3%

104.6%

SD

16.3%

18.0%

14.0%

17.1%

11.3%

14.8%

14.7%

13.0%

12.9%

9.2%

% CV

17.05%

19.84%

15.19%

18.79%

11.64%

14.95%

15.66%

13.64%

14.12%

8.76%

Table 2: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers on the 6 values were removed for the final calculation. Final results are presented in Table 3.

 

 

TA1-RFE

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

200.0

100.0

50.0

25.0

12.5

6.3

3.1

1.6

0.0

% of Negative Control

97.9%

83.9%

89.8%

84.3%

95.0%

96.9%

91.9%

93.0%

89.2%

102.1%

SD

12.3%

15.1%

13.6%

14.4%

11.1%

14.5%

14.4%

12.7%

12.6%

8.9%

% CV

12.55%

17.99%

15.19%

17.04%

11.64%

14.95%

15.66%

13.64%

14.12%

8.76%

Table 3: Cell viability measurements 24 h± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers were removed. Results of the final calculation are presented here. Note that one value was still above 15%, however,this is not considered to impact the IC50 calculation because all concentrations gave similar results.

As the percentage viability obtained for all concentrations was above 50%, no IC50 was determined.

Main experiments

As all values obtained with the RFE were above 50%, and further solubility testing showed that the top concentration of 400 µg/mL (0.4 mg/mL) was soluble, two Main Experiments (ME1 and ME3) were performed with a top test substance concentration of 400 µg/mL and a dilution factor of 1.2 and one (ME2) with a test substance top concentration of 200 µg/mL (0.2 mg/mL) with a dilution factor of 1.5. A positive control plate was run in parallel, to validate the assay with a top concentration of 100 µg/mL and a dilution factor of 1.2.

 

Positive Control - ME1

PC-ME1

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

107.4%

-1.0%

5.2%

11.5%

13.1%

38.2%

61.6%

77.5%

93.3%

92.6%

SD

3.7%

3.0%

2.4%

13.5%

3.1%

9.8%

4.0%

4.9%

3.3%

17.6%*

% CV

3.43%

-284.96%

47.19%

117.52%

23.57%

25.57%

6.46%

6.38%

3.57%

19.00%

Table 4: Cell viability measurements 24 h ± 1 h after application of positive control (SDS).NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8: *SD value of the NC2 is above 15% (17.6%), therefore one outlier was removed for IC50calculation. Final results are presented in Table 5.

 

PC-ME1

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

104.6%

-1.0%

5.0%

11.2%

12.8%

37.2%

60.0%

75.5%

90.8%

95.4%

SD

3.6%

2.9%

2.4%

13.2%

3.0%

9.5%

3.9%

4.8%

3.2%

12.7%

% CV

3.43%

-284.96%

47.19%

117.52%

23.57%

25.57%

6.46%

6.38%

3.57%

13.30%

Table 5: Cell viability measurements 24 h ± 1 h after application of positive control (SDS). NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. One outlier was removed for IC50 calculation. Final results are presented here.

 

The calculated IC50 was 43.71 µg/mL which is within the range of the historical data obtained during the project funded by Innovate UK (project number 131726) in which the assay was set up (range 26.5 - 70.9 µg/mL).


Test substance - ME1 

TA1-ME1

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

400.0

333.3

277.8

231.5

192.9

160.8

134.0

111.6

0.0

% of Negative Control

101.7%

93.9%

88.1%

91.6%

65.7%

88.0%

92.6%

98.6%

92.5%

98.3%

SD

9.8%

7.7%

7.8%

13.1%

22.9%*

11.2%

10.2%

10.1%

9.4%

6.2%

% CV

9.68%

8.24%

8.82%

14.28%

34.81%

12.68%

10.99%

10.21%

10.16%

6.35%

Table 6: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers on the 6 values were removed for the final calculation. Final results are presented in Table 7.

 

TA1-ME1

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

400.0

333.3

277.8

231.5

192.9

160.8

134.0

111.6

0.0

% of Negative Control

101.7%

93.9%

88.1%

91.6%

56.8%

88.0%

92.6%

98.6%

92.5%

98.3%

SD

9.8%

7.7%

7.8%

13.1%

7.9%

11.2%

10.2%

10.1%

9.4%

6.2%

% CV

9.68%

8.24%

8.82%

14.28%

13.83%

12.68%

10.99%

10.21%

10.16%

6.35%

Table 7: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers were removed. Results of the final calculation are presented here.

 

As the percentage viability obtained for all concentrations was above 50%, no IC50 was determined.

 

Positive Control - ME2

PC-ME2

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

104.9%

19.6%

9.2%

5.1%

28.4%

47.1%

66.0%

78.0%

99.6%

95.1%

SD

7.2%

11.8%

5.7%

14.7%

5.0%

10.0%

4.0%

9.5%

11.0%

9.1%

% CV

6.89%

60.16%

62.39%

290.78%

17.56%

21.24%

6.13%

12.13%

11.07%

9.55%

Table 8: Cell viability measurements 24 h ± 1 h after application of positive control (SDS). NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8.

 

The calculated IC50 was 47 µg/mL which is within the range of the historical data obtained during theproject funded by Innovate UK (project number 131726) in which the assay was set up (range 26.5-70.9 µg/mL).

 

Test substance - ME2

TA1-ME2

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

200.0

166.67

138.89

115.74

96.45

80.38

66.98

55.82

0.0

% of Negative Control

89.6%

120.6%

98.3%

106.7%

98.9%

108.2%

104.1%

115.9%

107.9%

110.4%

SD

18.8%

13.4%

13.4%

4.7%

14.9%

13.1%

13.1%

8.7%

8.0%

11.6%

% CV

20.93%

11.09%

13.59%

4.40%

15.09%

12.08%

12.62%

7.50%

7.41%

10.53%

Table 9: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. For SD values above 15%, a maximum of 2 outliers were removed for the final calculation. Final results are presented in Table 10.

 

TA1-ME2

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

200.0

166.67

138.89

115.74

96.45

80.38

66.98

55.82

0.0

% of Negative Control

82.9%

128.0%

104.4%

113.2%

104.9%

114.8%

110.4%

122.9%

114.5%

117.1%

SD

7.9%

14.2%

14.2%

5.0%

15.8%

13.9%

13.9%

9.2%

8.5%

12.3%

% CV

9.56%

11.09%

13.59%

4.40%

15.09%

12.08%

12.62%

7.50%

7.41%

10.53%

Table 10: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers were removed. Results of the final calculation are presented here.

 

As the percentage viability obtained for all concentrations was above 50%, no IC50 was determined.

Positive Control-ME3

PC-ME3

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

86.7%

-7.4%

21.0%

-28.1%

-10.8%

3.1%

15.7%

44.7%

101.8%

113.3%

SD

22.9%

12.3%

26.4%

11.4%

18.8%

13.7%

22.3%

27.2%

39.6%

21.4%

% CV

26.4%

-166.6%

126.0%

-40.6%

-174.4%

444.8%

142.0%

60.9%

38.9%

18.9%

Table 11: Cell viability measurements 24h± 1h after application of positive control (SDS). NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. For SD values above 15%, a maximum of 2 outliers were removed for the final calculation. Final results are presented in Table 12.

 

PC-ME3

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

100.0

83.3

69.4

57.9

48.2

40.2

33.5

27.9

0.0

% of Negative Control

88.5%

-6.9%

33.1%

-26.1%

-10.3%

2.9%

25.8%

37.8%

86.4%

111.5%

SD

9.7%

11.5%

16.1%

10.6%

13.3%

12.7%

13.0%

10.0%

12.4%

13.9%

% CV

11.0%

-166.6%

48.6%

-40.6%

-128.7%

444.8%

50.3%

26.5%

14.3%

12.5%

Table 12: Cell viability measurements 24h± 1h after application of positive control (SDS). NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers were removed. Results of the final calculation are presented here. Note that some values are still above 15%, however, this is not considered to impact the IC50 calculation because calculated value was within historical range.

 

The calculated IC50 was 32.09 µg/mL which is within the range of the historical data obtained during the project funded by Innovate UK (project number 131726) in which the assay was set up (range 26.5 - 70.9 µg/mL).

 

Test substance - ME3

TA1-ME3

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

400.0

333.3

277.8

231.5

192.9

160.8

134.0

111.6

0.0

% of Negative Control

92.9%

95.2%

92.4%

97.1%

94.7%

99.4%

97.5%

97.9%

99.6%

107.1%

SD

12.9%

3.5%

8.6%

5.9%

14.2%

11.5%

6.0%

9.3%

18.9%

13.2%

% CV

13.83%

3.72%

9.33%

6.10%

15.00%

11.55%

6.11%

9.53%

19.00%

12.30%

Table 13: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. For SD values above 15%, a maximum of 2 outliers on the 6 values were removed for the final calculation. Final results are presented in Table 14.

 

TA1-ME3

NC1

C1

C2

C3

C4

C5

C6

C7

C8

NC2

Concentration (µg/mL)

0.0

400.0

333.3

277.8

231.5

192.9

160.8

134.0

111.6

0.0

% of Negative Control

92.9%

95.2%

92.4%

97.1%

94.7%

99.4%

97.5%

97.9%

105.9%

107.1%

SD

12.9%

3.5%

8.6%

5.9%

14.2%

11.5%

6.0%

9.3%

12.1%

13.2%

% CV

13.83%

3.72%

9.33%

6.10%

15.00%

11.55%

6.11%

9.53%

11.43%

12.30%

Table 14: Cell viability measurements 24 h ± 1 h after application of the test substance. NC1 and 2: negative control (untreated cells), C1 to C8: Concentration 1 to 8. A maximum of 2 outliers were removed when SD values above 15%. Results of the final calculation are presented here.

 

As the percentage viability obtained for all concentrations was above 50%, no IC50 was determined.

Assay acceptance criteria

Results were checked against the following acceptance criteria:

1) Each run includes a Positive Control (SDS) plate with a defined series of concentrations to determine the IC50. In order for the run to be valid, the IC50 for SDS must be within the mean ± 1.5 SD of the historical set of runs with this substance (48.7 µg/mL ± (1.5 x 14.8)). For the RFE, and the 3 ME, the IC50values obtained with the PC were in the range of the historical data obtained during theproject funded by Innovate UK (project number 131726) in which the assay was set up.

2) SD (Standard Deviation) of the 6 values for each condition should be ≤15% (when viability percentage is above 30%). In some cases, a maximum of 2 outliers was removed to achieve SD ≤15%.

Applicant's summary and conclusion

Interpretation of results:
study cannot be used for classification
Conclusions:
Under the study conditions, the test substance predicted LD50 was considered to be 300 to 2000 mg/kg bw (Based on in vitro experimental IC50: >400 μg/mL).
Executive summary:

An in vitro study was conducted to determine the acute toxicity potential of test substance, 'mono- and di- C16 PSE, K+ and H3PO4', using cytotoxicity based on Neutral Red Uptake Method, according to OECD Guideline 129, in compliance with GLP. The study was assessed in vitro using XCellR8’s internally validated Human Cell-Based Screen (Non-Regulatory Method). The test uses cultured human dermal fibroblasts in animal product free culture, Neutral Red Uptake (NRU) method and a prediction model, based on the GHS classification system for acute toxicity. After a 24 h ± 1 h exposure of 8 concentrations of test substance in cell culture medium of Human Dermal Fibroblasts neonatal (HDFn), cytotoxicity was evaluated. Using a prediction model, determined previously, the IC50 value was converted to a corresponding GHS classification for oral acute toxicity. The solubility was first performed to determine the top concentration for the Range Finding Experiment (RFE). The percentage of viability for each concentration was calculated and normalised to viability results of the negative control (untreated cells) arbitrarily set to 100%. The IC50 (i.e. the concentration at which a decrease in cell viability of 50% was observed) was calculated as being >200 μg/mL in the RFE. As no toxicity was observed in the RFE, further solubility testing was performed to determine a possible higher concentration to use in the Main Experiments (ME). Therefore the highest concentration of 400 μg/mL in cell culture medium was used for ME1 and 3, while 200 μg/mL was used for ME2. In all test substance assays, no cytotoxicity was observed, even at the top concentration. It was not possible to determine an IC50 value as all percentage of viability obtained were above 50%. Based on the study results (IC50: >400 μg/mL), the study author concluded, the test substance could fall in potential EU CLP category 4 (LD50: 300 to 2000 mg/ kg bw).