Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 407-710-3 | CAS number: - C.I. DIRECT RED 83:1; KAYARUS SUPRA RUBINE BLN
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. Symptomatic treatment.
Emergency measure - Eyes: Rinse immediately with plenty of water for at least 15
minutes.
Emergency measure - Skin: Wash with plenty of water.
Remove contaminated clothes and launder before using again.
Emergency measure - Ingestion: Symptomatic treatment.
Fire-fighting measures
Recommended extinguishing agent: Foam, carbon dioxide, dry agent and water.
Product arising from burning: The substance is not combustible but it could burn if
involved in a fire, evolving noxious fumes (eg. carbon,
nitrogen and sulphur oxides and compounds containing
sulphur, copper and sodium). However there is no
experimental evidence to support the anticipated combustion
products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from the immediate vicinity.
Wear eye protection, chemical-resistant gloves, protective
clothing and a dust mask capable of adequately controlling
exposure.
Avoid dust formation. Absorb spillages of solutions with a
suitable inert material (e.g. sand or soil). Carefully
transfer the spillage to waste containers, or use an
approved sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original Kayarus Supra Rubine BLN containers.
Clean the spillage area with water.
Dispose of waste material in accordance with local
regulations by landfill or incineration.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance. When exposure cannot be prevented or adequately
controlled other than by the use of personal protective
equipment, eye protection (safety glasses with side shields
are recommended) should be worn, and skin contact prevented
by using chemical-resistant gloves and protective clothing
(e.g. laboratory coat or uniform).
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international standards. A dust mask complying with prEN149,
FPP Grade 1 (i.e. which is equivalent to BS6016, type I) is
recommended.
Storage: There are no special storage conditions required.
Steel drums which are lined with a resin coating, or cartons
are considered adequate to store preparations containing the
substance.
Keep containers tightly closed when not in use.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None known.
Chemical reaction with water: None.
Disposal considerations
Industry - Possibility of recovery/recycling: The substance will be used exclusively by industry and
confined to systems that are essentially open and batchwise
industrial operations. Handling of the substance will be by
trained operators, and it will be kept to a minimum.
Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill in accordance with
Section A6.1.3. In principle, it may be possible to recover
larger spillages of uncontaminated material for subsequent
use.
Industry - Possibility of neutralisation: No health hazard has been identified from the Base Set tests
on the substance, and no chemical treatment is necessary or
practicable. However, adequate protection will be worn
during normal handling and when dealing with spillages to
ensure any unidentified or long-term health hazard is
minimised (see Section A2.3.1).
No chemical treatment is practicable to neutralise the
hazardous environmental properties of the substance.
Industry - Possibility of destruction: controlled discharge: Contaminated containers, waste material or spillages of
solutions mixed with inert material (eg. sand or soil) may
be disposed of by landfill at an authorised tip in
accordance with local regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon,
nitrogen and sulphur oxides and compounds containing
sulphur, copper and sodium) could be formed.
Industry - Possibility of destruction - water purification: The substance could not normally be discharged to the sewage
system or the aqueous environment. Dye-houses normally pass
such waste water, which consists of a highly-dilute solution
of the substance, through a pre-treatment plant before
discharge as industrial effluent. Furthermore, the substance
is not likely to have adverse effects on sewage treatment
systems following accidental discharge, because it has been
shown not to be unduly toxic to sewage microorganisms.
Industry - Possibility of destruction - other: Not applicable.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Cellulose fibres dyed with the substance may be disposed of
by landfill at an authorised tip in accordance with local
regulations.
Public at large - Possibility of destruction - incineration: Incineration of cellulose fibres dyed with the substance
will not take place to a significant extent.
Public at large - Possibility of destruction - water purification: Not application.
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
