Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 814-171-1 | CAS number: 123739-10-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Biodegradation in water: screening tests
Administrative data
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 11 October 2017 - 10 November 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
- Version / remarks:
- 17 July 1992
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: ISO International Standard 10634. "Water Quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium''
- Version / remarks:
- 1995
- Deviations:
- no
- GLP compliance:
- yes
Test material
- Reference substance name:
- DEPDA adduct
- Cas Number:
- 123739-10-6
- IUPAC Name:
- DEPDA adduct
- Test material form:
- solid
- Details on test material:
- - Physical appearance: dark amber solid
- Storage conditions: at room temperature
Constituent 1
- Specific details on test material used for the study:
- ThCO2 of the test item was calculated to be 2.53 mg CO2/mg.
Study design
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge, domestic, non-adapted
- Details on inoculum:
- - Source of inoculum/activated sludge: Municipal sewage treatment plant 'Waterschap Aa en Maas', 's-Hertogenbosch, The Netherlands, receiving predominantly domestic sewage.
- Storage conditions: Freshly obtained sludge was kept under continuous aeration until further treatment.
- Concentration of suspended solids: 3.5 g/L in the concentrated sludge.
- Preparation of inoculum for exposure: The sludge was allowed to settle (43 minutes) and the supernatant liquid was used as inoculum at the amount of 10 mL/L of mineral medium.
- Pretreatment: The day before the start of the test (day -1) mineral components, Milli-RO water (ca. 80% of final volume) and inoculum (1% of final volume) were added to each bottle. This mixture was aerated with synthetic air overnight to purge the system of CO2. - Duration of test (contact time):
- 28 d
Initial test substance concentrationopen allclose all
- Initial conc.:
- 17.5 mg/L
- Based on:
- test mat.
- Remarks:
- nominal
- Initial conc.:
- 2.53 other: CO2/mg
- Based on:
- ThCO2
- Initial conc.:
- 12 mg/L
- Based on:
- TOC
Parameter followed for biodegradation estimation
- Parameter followed for biodegradation estimation:
- CO2 evolution
- Details on study design:
- TEST CONCENTRATIONS:
- Test solutions: bottle A: 17.48 mg test item per litre and bottle B 17.24 mg test item per litre
CONTROLS:
- Inoculum blank: containing only inoculum (2 bottles)
- Positive control: containing reference item and inoculum (1 bottle).
- Toxicity control: containing test item, reference item and inoculum (1 bottle).
PREPARATION OF TEST SOLUTIONS: Sine the test item was not sufficiently soluble to allow preparation of an aqueous solution at a concentration of 1 g/L, small watch glasses were used to add weighed amounts to the 2-litres test bottles containing medium with microbial organisms and mineral components. The test solutions were continuously stirred during the test, to ensure optimal contact between the test item and the test organisms.
TEST CONDITIONS
- Composition of medium: According to OECD 301B
- Test temperature: 22-24 °C
- pH: at start: 7.6, t=14d: 7.9 (positive and toxicity control), t=28d: 7.4-7.5 (blank controls and test bottles)
- pH adjusted: no
- Test media were excluded from light and the test vessels were brown coloured glass bottles.
- Test media were aerated and stirred continuously.
TEST SYSTEM
- Number of culture flasks/concentration: 2 for test suspension, 2 for inoculum blank, 1 for positive control, 1 for toxicity control.
- Method used to create aerobic conditions: Aeration with synthetic air (CO2 < 1 ppm).
- Method used to create aerobic conditions: Synthetic air (CO2 < 1 ppm) sparged through scrubbing solutions at a rate of approximately 1-2 bubbles per second (ca. 30-100 mL/min).
- Details of trap for CO2 and volatile organics: Three CO2-absorbers (bottles filled with 100 mL 0.0125 M Ba(OH)2) were connected in series to the exit air line of each test bottle. Each time the CO2-absorber nearest to the test bottle was removed for titration; each of the remaining two absorbers was moved one position in the direction of the test bottle. A new CO2-absorber was placed at the far end of the series.
SAMPLING
- Sampling frequency: Titrations were made on day 2, 5, 8, 11, 15, 18, 22, 25 and 29. Titrations for the positive and toxicity control were made over a period of at least 14 days.
- Sampling method: Titration of Ba(OH)2 in the gas scrubbing bottles. Phenolphthalein (1% solution in ethanol, Merck) was used as pH-indicator.
Reference substance
- Reference substance:
- acetic acid, sodium salt
- Remarks:
- 40 mg/L (1.07 mg CO2/mg based on ThCO2)
Results and discussion
% Degradation
- Key result
- Parameter:
- % degradation (CO2 evolution)
- Remarks:
- Mean of 2 bottles
- Value:
- 5.5
- Sampling time:
- 28 d
- Details on results:
- - Biodegradation: The test item biodegraded for 5% and 6% (based on ThCO2), for the duplicate bottles tested. Thus, the criterion for ready biodegradability (at least 60% biodegradation within a 10-day window) was not met.
- Toxicity control: More than 25% biodegradation occurred within 14 days (30%, based on ThCO2). Therefore, the test item was assumed not to inhibit microbial activity.
- Functioning of the test system was checked by testing the reference item sodium acetate, which showed a normal biodegradation curve.
BOD5 / COD results
- Results with reference substance:
- The positive control, sodium acetate, showed a normal biodegradation curve and reached 84% biodegradation after 14 days, which passes the validity criterium of at least 60% biodegradation within 14 days.
Any other information on results incl. tables
Table 1 CO2 Production and Percentage Biodegradation of the Test Item (Bottle A)
Day |
HCl (0.05 N) titrated (mL) |
Produced CO2 (mL HCl) |
Produced CO2 (mg) |
Cumulative CO2 (mg) |
Biodegradationa) (%) |
||
Blank (mean) |
Bottle A |
||||||
1 |
49.34 |
49.36 |
0.00 |
0.0 |
0.0 |
0 |
|
4 |
47.44 |
47.17 |
0.27 |
0.3 |
0.3 |
0 |
|
6 |
47.37 |
47.05 |
0.32 |
0.4 |
0.6 |
1 |
|
8 |
47.68 |
47.76 |
0.00 |
0.0 |
0.6 |
1 |
|
11 |
46.72 |
46.39 |
0.33 |
0.4 |
1.0 |
1 |
|
15 |
45.72 |
45.64 |
0.08 |
0.1 |
1.1 |
1 |
|
18 |
45.24 |
45.03 |
0.21 |
0.2 |
1.3 |
1 |
|
22 |
44.73 |
44.29 |
0.44 |
0.5 |
1.8 |
2 |
|
25 |
41.77 |
41.29 |
0.48 |
0.5 |
2.3 |
3 |
|
29b) |
43.05 |
43.26 |
0.00 |
0.0 |
2.3 |
3 |
|
29b) |
46.26 |
44.71 |
1.54 |
1.7 |
4.0 |
5 |
|
29b) |
48.55 |
47.33 |
1.22 |
1.3 |
5.4 |
6 |
|
a): Calculated as the ratio between CO2produced (cumulative) and the ThCO2of the test item: 88.4 mg CO2/2L. b): CO2measured on day 29 is actually part of CO2production of day 28, since microbial activity was ended on day 28 by addition of HCl. |
|
Table 2 CO2 Production and Percentage Biodegradation of the Test Item (Bottle B)
Day |
HCl (0.05 N) titrated (mL) |
Produced CO2 (mL HCl) |
Produced CO2 (mg) |
Cumulative CO2 (mg) |
Biodegradationa) (%) |
||
Blank (mean) |
Bottle B |
||||||
1 |
49.34 |
49.43 |
0.00 |
0.0 |
0.0 |
0 |
|
4 |
47.44 |
47.80 |
0.00 |
0.0 |
0.0 |
0 |
|
6 |
47.37 |
47.13 |
0.24 |
0.3 |
0.3 |
0 |
|
8 |
47.68 |
47.38 |
0.29 |
0.3 |
0.6 |
1 |
|
11 |
46.72 |
46.60 |
0.12 |
0.1 |
0.7 |
1 |
|
15 |
45.72 |
45.64 |
0.08 |
0.1 |
0.8 |
1 |
|
18 |
45.24 |
44.83 |
0.41 |
0.5 |
1.3 |
1 |
|
22 |
44.73 |
44.60 |
0.13 |
0.1 |
1.4 |
2 |
|
25 |
41.77 |
41.66 |
0.11 |
0.1 |
1.5 |
2 |
|
29b) |
43.05 |
42.92 |
0.13 |
0.1 |
1.7 |
2 |
|
29b) |
46.26 |
44.95 |
1.30 |
1.4 |
3.1 |
4 |
|
29b) |
48.55 |
47.63 |
0.92 |
1.0 |
4.1 |
5 |
|
a): Calculated as the ratio between CO2produced (cumulative) and the ThCO2of the test item: 87.2 mg CO2/2L. b): CO2measured on day 29 is actually part of CO2production of day 28, since microbial activity was ended on day 28 by addition of HCl. |
|
Table 3 CO2 Production and Percentage Biodegradation of the Toxicity Control
Day |
HCl(0.05 N) titrated (mL) |
Produced CO2 (mL HCl) |
Produced CO2 (mg) |
Cumulative CO2 (mg) |
Biodegradationa) (%) |
|
Blank (mean) |
Toxicity control |
|||||
1 |
49.34 |
49.77 |
0.00 |
0.0 |
0.0 |
0 |
4 |
47.44 |
48.35 |
0.00 |
0.0 |
0.0 |
0 |
6 |
47.37 |
48.11 |
0.00 |
0.0 |
0.0 |
0 |
8 |
47.68 |
42.71 |
4.97 |
5.5 |
5.5 |
3 |
11 |
46.72 |
21.85 |
24.87 |
27.4 |
32.8 |
19 |
15b) |
45.72 |
27.75 |
17.97 |
19.8 |
52.6 |
30 |
a): Calculated as the ratio between CO2produced (cumulative) and the sum of the ThCO2of the test item and positive control: 173.7 mg CO2/2L (ThCO2test item: 88.2 mg CO2/2L + ThCO2sodium acetate: 85.4 mg CO2/2L). b): CO2measured on day 15 is actually part of CO2production of day 14, since microbial activity was ended on day 14 by addition of HCl. |
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Remarks:
- See 'overall remarks'
- Interpretation of results:
- not readily biodegradable
- Conclusions:
- In a biodegradability test (Modified Sturm Test), performed according to OECD 301B and GLP principles, INCA 460: DEPDA Adduct was not readily biodegradable (5% and 6% biodegradation in duplicate bottles tested).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.