Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient from exposure, keep warm and at rest.

Obtain medical attention if ill effects occur.
Emergency measure - Eyes: Immediately irrigate with eyewash solution or clean water,
holding the eyelids apart, for at least 10 minutes.

Obtain immediate medical attention.
Emergency measure - Skin: Remove contaminated clothing.

Wash skin immediately with water.

Obtain immediate medical attention.
Emergency measure - Ingestion: Obtain immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, foam, dry powder, CO2

Product arising from burning: Carbon monoxide, carbon dioxide, nitrogen oxides, ammonia

Product determined by test: N

Protective equipment: Self-contained breathing apparatus andsuitable protective
clothing.

Accidental release measures

Emergency measures in case of spillage: Do not allow to enter drains, sewers or watercourses.

Absorb spillages onto sand or any suitable absorbent
material.

Transfer to a container for disposal.

Wash the spillage area with water.


Spillages or uncontrolled discharges into watercourses must
be alerted to the appropriate regulatory body.

Handling and storage

Handling: Avoid contact with skin and eyes.

Avoid inhalation of high concentrations of mists.


Wear eye/face protection and suitable gloves.

Storage: Keep container tightly closed at temperatures from 10 to
30°C.

Packaging of the substance and or preparation: 80% preparation: 200 l mild steel drums


0.08% product (hydraulic fluids): 200 l re-conditioned steel
drums and 2 - 5 l plastic tubs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN 3082
Transport: Environmentally hazardous substance, liquid N.O.S., Class 9.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Incompatible materials: strong acids, alkalis, strong
oxidising agents

Chemical reaction with water: None reported.

Dust explosion: Not applicable as test substance is a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Any out of specification hydraulic oil blends can be
reblended at a 10% treat rate.


Greater than 50% of waste hydraulic fluids from professional
users are recycled through either refining (via activated
clay) or used as a fuel for cement kiln firing (with
temperatures in excess of 1000°C).

Industry - Possibility of neutralisation: Dilution with compatible fluids, or retention on absorptive
media.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Recommended for the 80% preparation. Controlled
incineration of hydraulic fluids possible in kiln firing
(with temperatures in excess of 1000°C). Flue gases should
be scrubbed.

Industry - Possibility of destruction - water purification: Not recomended.

Industry - Possibility of destruction - other: Landfill of small quantities is possible in accordance with
national legislation.

Public at large - Possibility of recovery/recycling: Not applicable as the test substance is not used by the
public at large.