Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Get medical attention if breathing is
difficult.
Emergency measure - Eyes: Flush eyes thoroughly with large amounts of water for at
least 15 minutes. Get medical attention.
Emergency measure - Skin: Wash skin with soap and water. Remove severely contaminated
clothing and clean before reuse. Seek medical attention in
the unlikely event that irritation occurs.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide, dry chemical or foam recommended. Apply
water spray to cool exposed closed containers.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon and
nitrogen). However, there is no experimental evidence to
support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Small spill:


For dry powder spills, inert materials such as sand may be
added to control dusting prior to clean-up. Industrial grade
vacuum sweepers are also recommended. Place spilled
material into appropriate waste containers for disposal.


Large spill:


Contain spilled material immediately with an inert substance
such as sand or earth. Use plastic or aluminium shovel to
transfer diluted waste material into appropriate containers
for disposal.


Airborne organic pigment dust may be an explosion hazard.
Secure possible sources of ignition and avoid dusting.


Dispose of waste material by incineration or landfill in
accordance with local regulations.


Avoid release to drains and watercourses

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a moderately cool, dry, well-ventilated area, away
from direct sources of heat. Empty containers may contain
product residues and should be treated appropriately.
Position containers so that any labelling information is
visible.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 10 kg paper bags, which are packed into cartons or Gaylords
(bulk packages containing individual containers).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None
Transport: No specific recommendations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: There is a potential dust explosion hazard from this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: Not known.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg oxides of
carbon and nitrogen) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment.