Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 426-720-9 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove the victim to fresh air. If irritation persists, seek
medical attention.
Emergency measure - Eyes: Wash eyes with water for at least 15 minutes. Seek medical
attention.
Emergency measure - Skin: Wash skin with soap and water. Seek medical attention if
irritation occurs.
Emergency measure - Ingestion: Seek immediate medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water, foam, dry chemical, or carbon dioxide
Product arising from burning: The substance is combustible, evolving noxious fumes (eg
carbon and nitrogen oxides).
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards.
Avoid dust formation by damping down with water. Carefully
transfer the spillage to waste containers, or use a sealed
industrial vacuum machine. Containers filled with waste
material must be labelled in the same way as the original
substance containers.
Clean the spillage area with soap and water. Avoid directing
the washings to the drains.
Dispose of waste material in accordance with local
regulations by incineration.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by oral,
skin or eye.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard prEN374
Chemical protective clothing to Standard EN368
Eye protection to Standard prEN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a dust mask
conforming to EN149 FFP1.
These measures should be regarded as a minimum.
Storage: Store in a cool dry area. Avoid storing with acids or strong
oxidisers.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Substance is packaged in paper bags and transported in
sealed containers.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None
Transport: None
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported
Chemical reaction with water: None reported
Dust explosion: There is a potential dust explosion hazard from this organic
powder.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Handling of the substance will be by trained operators, and
will be kept to a minimum.
Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use by recrystallisation using an
aromatic solvent.
Industry - Possibility of neutralisation: None known
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
incineration in accordance with local regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
nitrogen oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable, the substance will not enter the public
domain.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
