Registration Dossier

Administrative data

First-aid measures

Precautions for safe handling and use:
Inhaltation:Danger unknown
Contact with skin: Wash thoroughly with water and sopa
Contact with eyes: Wash wit copious quantities of water, consult an oculist
Ingestion: Rinse mouth and obtain medical attention

Fire-fighting measures

Special fire fighting procedures and extinguishing media:
Handling: Water, carbon dioxide, water spray, dry chemical powder and appropriate foam
Prohibited specific hazards: Material emits toxic fumes on combustion
Special protective equipment: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

NFPA Rating (Estimated) Health: 0 Flammability: 0 Reactivity 0

Accidental release measures

In case of material is released or spilled:
1. Wear self-contained breathing apparatus, rubber boots and rubber gloves
2. Cover with absorbents and complete pick up material. Absorbents: Sand, saw dust, dry lime, soda ash
3. Keep in a closed container for waste disposal
4. Ventilate area and wash spill site after material pick up is complete. Evacuate area.

Handling and storage

Indications for protection agains fire and explosion:
1. Keep away from iginition source
2. No smoking
Storage condition:
1. Store at room temperature (15 to 25°)
2. Not to be stored with oxidizing agents
3. Incompatible materials: Not known

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eyes: Total protective glasses
Wash contaminated cloth before reuse
Discard contaminated shoes
Wash thoroughly after handling
Do not breathe vapor
Compatible chemical resistant cloves
When opening the container outside in open areas wear approved dust mask and in poorly ventilated areas wear NIOSH/MSHA approved respirator

Stability and reactivity

Stability: Product is stabel from safety point of view
Incompatibility: Strong oxidizing agents
Hazardous sombustion or decomposition product: Carbon monoxide and carbon dioxide
Hazardous polymerization: Will not occur

Disposal considerations

Product and waste can be eliminated as a non-hazardous industrial waste according to local regulations and federal law concerning waste elimination