Registration Dossier

Administrative data

First-aid measures

General information:
- Remove clothing where dust collected.
- Adhere to personal protective measures when giving first aid.

After inhalation:
- Remove the casualty into fresh air and keep him calm.
- Ensure supply of fresh air.
- Take medical treatment.

After contact with skin:
- In case of contact with skin, clean with soap and water.
- Take for medical treatment.

After contact with eyes:
- Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.
- Summon a doctor immediately.

After ingestion:
- If swallowed do not induce vomiting, seek medical advice and show safety datasheet or label.
- Rinse out mouth and give plenty of water to drink.

Fire-fighting measures

Suitable extinguishing media: foam
Extinguishing media that must not be used for safety reasons: gaseous extinguishing media; water.

Special hazards arising from the substance or mixture:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), phosphorus oxide (eg Phosphorus pentoxide), carbon dioxide (CO2).

Advice for firefighters - Special protective equipment for firefighting:
- Use self-contained breathing apparatus
- Do not inhale explosion and/or combustion gases
- Wear full protective suit
- In case of fire, use acid-resistant equipment / personal protective equipment.

Further information: Fire residues and contaminated firefighting water must be disposed of in accordance with the local registrations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
- Do not inhale dust
- Avoid contact with skin and eyes
- Self-contained breathing apparatus
- Wear personal protective equipment. Unprotected persons must be kept away.

Environmental precautions:
- Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up:
- Take up mechanically
- Dispose of absorbed material in accordance with the regulations
- Avoid raising dust.

Handling and storage

Advice on safe handling:
- Provide suitable exhaust ventilation at processing machines
- Use only in well ventilated areas
- Avoid the formation and deposition of dust
- Take precautionary measures against electrostatic loading.

Hygiene measures:
- Wash hands before breaks and after work
- At work do not eat, drink, smoke or take drugs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:
- Do not inhale dust.
- Avoid contact with eyes and skin.

Respiratory protection: Full mask with dust filter P3

Hand protection:
- Gloves (acid-resistant)
- Nitrile rubber gloves
- Neoprene gloves

Eye protection: Tightly fitting safety glasses and in case of severe danger add face protection (shield).

Body protection: Acid-resistant protective clothing

Stability and reactivity

Chemical stability: Stable
Possibility of hazardous reactions: Risk of dust explosions
Conditions to avaoid: Temperatures exceeding thermal stability of the masterbatch. High concentrations of powders. Electrostatic charges.
Incompatible materials: none
Hazardous decomposition products: Phosphorus oxides (e.g. P2O5)

Disposal considerations

Waste treatment methods:
Product: Disposal in an incineration plant in accordance with the regulations of the local authorities.
Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.