Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 207-966-4 | CAS number: 503-40-2
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
· 4.1 Description of first aid measures
· General information Remove contaminated clothing.
· After inhalation Supply fresh air; consult doctor in case of symptoms.
· After skin contact Immediately wash with water and soap and rinse thoroughly.
· After eye contact Rinse opened eye for several minutes under running water. Then consult doctor.
· After swallowing
Do not induce vomiting; instantly call for medical help.
Drink copious amounts of water and provide fresh air. Instantly call for doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
· General information Remove contaminated clothing.
· After inhalation Supply fresh air; consult doctor in case of symptoms.
· After skin contact Immediately wash with water and soap and rinse thoroughly.
· After eye contact Rinse opened eye for several minutes under running water. Then consult doctor.
· After swallowing
Do not induce vomiting; instantly call for medical help.
Drink copious amounts of water and provide fresh air. Instantly call for doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Fire-fighting measures
· 5.1 Extinguishing media
· Suitable extinguishing agents
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant
foam.
· 5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
Sulphur dioxide (SO2)
- carbon dioxide, carbon monoxide
· 5.3 Advice for firefighters
· Protective equipment: No special measures required.
· Suitable extinguishing agents
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant
foam.
· 5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
Sulphur dioxide (SO2)
- carbon dioxide, carbon monoxide
· 5.3 Advice for firefighters
· Protective equipment: No special measures required.
Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
· 6.2 Environmental precautions: Dilute with much water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
· 6.4 Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
Wear protective equipment. Keep unprotected persons away.
· 6.2 Environmental precautions: Dilute with much water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
· 6.4 Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
Handling and storage
· 7.1 Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
· Information about protection against explosions and fires: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep container tightly sealed.
· Storage class LGK 8B
· 7.3 Specific end use(s) No further relevant information available.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
· Information about protection against explosions and fires: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep container tightly sealed.
· Storage class LGK 8B
· 7.3 Specific end use(s) No further relevant information available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN2586
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN2586
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN2586
Shipping information
- Proper shipping name and description:
- 2586 ALKYLSULPHONIC ACIDS, LIQUID
ALKYLSULPHONIC ACIDS, LIQUID - Chemical name:
- ALKYLSULPHONIC ACIDS
- Labels:
- 8
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN2586
Shipping information
- Proper shipping name and description:
- 2586 ALKYLSULPHONIC ACIDS, LIQUID
ALKYLSULPHONIC ACIDS, LIQUID - Chemical name:
- ALKYLSULPHONIC ACIDS
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Additional information about design of technical systems: No further data; see item 7.
· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Keep away from foodstuffs, beverages and food.
Take off immediately all contaminated clothing
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
· Breathing equipment:
Respiratory protection in case of release of fumes / aerosols. Particle filter with medium efficiency
for solid and liquid particles (eg EN 143 or 149, Type P2 or FFP2).
· Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks
of quality and varies from manufacturer to manufacturer.
PVC gloves
Butyl rubber, BR
Fluorocarbon rubber (Viton)
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and
has to be observed.
· For the permanent contact gloves made of the following materials are suitable:
Fluorocarbon rubber (Viton)
Nitrile rubber, NBR
· As protection from splashes gloves made of the following materials are suitable: PVC gloves
· Not suitable are gloves made of the following materials:
Leather gloves
Strong gloves
· Eye protection: Tightly sealed safety glasses.
· Body protection: Protective work clothing.
· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Keep away from foodstuffs, beverages and food.
Take off immediately all contaminated clothing
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
· Breathing equipment:
Respiratory protection in case of release of fumes / aerosols. Particle filter with medium efficiency
for solid and liquid particles (eg EN 143 or 149, Type P2 or FFP2).
· Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks
of quality and varies from manufacturer to manufacturer.
PVC gloves
Butyl rubber, BR
Fluorocarbon rubber (Viton)
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and
has to be observed.
· For the permanent contact gloves made of the following materials are suitable:
Fluorocarbon rubber (Viton)
Nitrile rubber, NBR
· As protection from splashes gloves made of the following materials are suitable: PVC gloves
· Not suitable are gloves made of the following materials:
Leather gloves
Strong gloves
· Eye protection: Tightly sealed safety glasses.
· Body protection: Protective work clothing.
Stability and reactivity
· 10.1 Reactivity No further relevant information available.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions No dangerous reactions known
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: In case of fire: see Section 5.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions No dangerous reactions known
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: In case of fire: see Section 5.
Disposal considerations
· 13.1 Waste treatment methods
· Recommendation Must be specially treated under adherence to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleaning agent: Water, if necessary with cleaning agent.
· Recommendation Must be specially treated under adherence to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleaning agent: Water, if necessary with cleaning agent.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
