Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 236-419-2 | CAS number: 13360-78-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 29 March 2012 - 18 April 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- Also complies with OECD GLP regulations. Deviations were limited, listed below, and are believed not to impact the reliability of the test result.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.11 (Biodegradation: Activated Sludge Respiration Inhibition Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- ISO 8192 (Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- - Name of test material (as cited in study report): S-10793
- IUPAC nomenclature - Sodium diisobutyldithiophosphinate
- Lot S-20227-170B
- Appearance - White powder with lumps
- CAS No. 13360-78-6
- Molecular Formula - C8H18PS2.Na
- Molecular Weight - 232 g/mole
- Purity 93-94%
- Expiration date of the lot/batch: 16 December 2013
- Storage condition of test material: At room temperature in the dark - Analytical monitoring:
- no
- Vehicle:
- no
- Details on test solutions:
- The test substance was not completely soluble in test medium at the loading rates initially prepared. Therefore, 1-Litre test bottles were filled with 200 ml of test substance mixtures in Milli-RO water with initial loading rates of 2.5 times the final loading rate. These mixtures were stirred in closed dark brown bottles for approximately 24 hours. Subsequently, 16 ml synthetic medium, 250 ml sludge and Milli-RO water up to 500 ml were added resulting in the required loading rates. Optimal contact between the test substance and test organisms was ensured applying continuous aeration and stirring.
- Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Details on inoculum:
- - Name and location of sewage treatment plant where inoculum was collected: municipal sewage treatment plant: 'Waterschap Aa en Maas', 's-Hertogenbosch, The Netherlands, receiving predominantly domestic sewage.
- Method of cultivation: The sludge was coarsely sieved, washed and diluted with ISO-medium. A small amount of the sludge was weighed and dried overnight at ca. 105°C to determine the amount of suspended solids (2.9 g/l of sludge, as used for the test). The pH was 7.9 on the day of testing. The batch of sludge was used one day after collection; therefore 50 ml of synthetic medium was added per litre of activated sludge at the end of the collection day. The sludge was kept aerated at test temperature until use.
- Initial biomass concentration: Number of micro-organisms was determined as the amount of Mixed Liquor Suspended Solids (MLSS) per litre test
medium. - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 3 h
- Post exposure observation period:
- After the 3-hour contact time, the oxygen consumption was recorded for a period of 9 to 12 minutes. During measurement, the sample was not aerated but continuously stirred on a magnetic stirrer. The pH and temperature were determined in the remaining part of the reaction mixture.
- Test temperature:
- 18.1 - 21.1 °C
- pH:
- The pH in all test series, before addition of sludge was between 7.2 and 7.6.
After the 3-hour exposure period the pH was between 7.9 and 8.4 - Dissolved oxygen:
- Start of measurement: 6.4 - 8.8 mg/L
- Nominal and measured concentrations:
- Nominal loading rates: 10, 32, 100, 320 and 1000 mg/l.
- Details on test conditions:
- TEST SYSTEM
- Type: open
- Material, size, headspace, fill volume: All glass
- Aeration: During exposure with clean, oil-free air
- No. of vessels per concentration (replicates): 5
- No. of vessels per control (replicates): 6 (blanks)
- Biomass loading rate: 1.45 g/l suspended solids in final test mixture
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Tap-water purified by reverse osmosis (Milli-RO)
EFFECT PARAMETERS MEASURED:
The respiration rate from each vessel, in mg O2/l/hr, was calculated from the linear part of the respiration curve, which was generally between 2 and 7 mg O2/l.
TEST CONCENTRATIONS
- Test concentrations: full test, 10, 32, 100, 320 and 1000 mg/l (loading rates)
The final test was a standard test that did not include a nitrification inhibitor or abiotic conditions.
Range finding study
- Test concentrations: 10, 100 and 1000 mg/l (3 replicates for the highest loading rate, 1 for lower loading rates, 2 replicates of blank control, 1 abiotic control and 1 highest loading rate with nitrification inhibitor)
- Results used to determine the conditions for the definitive study:
* The combined limit/range-finding test showed -1, 19 and an average of 59% inhibition of the respiration rate at a loading rate of 10, 100 and 1000 mg/l, respectively. Therefore, the expected NOEC was below a loading rate of 100 mg/l and the expected EC50 between a loading rate of 100 and 1000 mg/l.
* There was no significant oxygen uptake from abiotic processes and the results at 1000 mg/l with a nitrification inhibitor showed that the heterotrophic inhibition of the respiration rate was slightly lower than the total inhibition. Therefore, N-allylthiourea was not used in the final test. - Reference substance (positive control):
- yes
- Remarks:
- 3,5-dichlorophenol
- Duration:
- 3 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Remarks:
- (loading rate)
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Duration:
- 3 h
- Dose descriptor:
- EC10
- Effect conc.:
- 23 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Remarks:
- (loading rate)
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: (4.2-130 mg/l 95% CL)
- Duration:
- 3 h
- Dose descriptor:
- other: EC20
- Effect conc.:
- 53 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Remarks:
- (loading rate)
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: (10-270 mg/l 95% CL)
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- 640 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Remarks:
- (loading rate)
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: estimated value
- Duration:
- 3 h
- Dose descriptor:
- other: EC80
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Remarks:
- (loading rate)
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Details on results:
- No statistically significant inhibition of the respiration rate of the sludge was recorded at a loading rate of 10 mg / litre (Bonferroni t-Test: α=0.05). At higher loading rates the inhibitory effect of S-10793 on aerobic waste water (activated sludge) bacteria increased with increasing loading rate, ranging from an average of 13% inhibition at a loading rate of 32 mg/l to an average of 61% at a loading rate of 1000 mg/l.
Oxygen consumption (average values) - % Inhibition relative to the control value
Controls : 48 mg O2/l h - -
10 mg/l : 46 mg O2/l h - 5
32 mg/l : 42 mg O2/l h - 13*
100 mg/l : 39 mg O2/l h - 19*
320 mg/l : 29 mg O2/l h - 39*
1000 mg/l : 19 mg O2/l h - 61*
* Statistically significant (Bonferroni t-Test: alpha 0.05) - Results with reference substance (positive control):
- The EC50 of 3,5-dichlorophenol was 5.3 and 4.6 mg/l, in the range-finding and final test respectively. (within the accepted range of 2 to 25 mg/l for total respiration)
- Reported statistics and error estimates:
- ECx
The percentage inhibition was plotted against the logarithm of the loading rates. The EC50, and if possible the EC10, EC20 and EC80 for the test substance, were determined using linear regression analysis. If available, the 95% confidence limits of the EC values were given.
NOEC estimation
The NOEC was based on statistical analysis of the data. Data obtained for the test concentrations TA.M. Boelter, H.L. Bergman. - Validity criteria fulfilled:
- yes
- Conclusions:
- Under the conditions of this present test S-10793 was not toxic to waste water (activated sludge) bacteria at or below a loading rate of 10 mg/l (NOEC).
The EC10 was at a loading rate of 23 mg/l (95% confidence interval: 4.2 - 130 mg/l).
The EC20 was at a loading rate of 53 mg/l (95% confidence interval: 10 - 270 mg/l).
The EC50 was estimated to be at a loading rate of 640 mg/l.
The EC80 was above the highest loading rate tested (> 1000 mg/l). - Executive summary:
The influence of the test matrial on the respiration rate of activated sludge was investigated after a contact time of 3 hours following OECD TG 209 and under GLP conditions.
The final test was performed based on the result of a preceding combined limit/range-finding test. Five loading rates, ranging from 10 to 1000 mg/l, increasing with a factor 3.2 were tested. Five replicates per loading rate and six replicates for an untreated control group were tested.
No statistically significant inhibition of the respiration rate of the sludge was recorded at a loading rate of 10 mg/l. At higher loading rates the inhibitory effect of the test material on aerobic waste water (activated sludge) bacteria increased with increasing loading rate, ranging from an average of 13% inhibition at a loading rate of 32 mg/l to an average of 61% at a loading rate of 1000 mg/l.
The batch of activated sludge was checked for sensitivity by testing the reference substance 3,5 -dichlorophenol, which showed normal sensitivity.
Reference
Description of key information
Under the conditions of this study, the test material was not toxic to waste water (activated sludge) bacteria at or below a loading rate of 10 mg/l (NOEC).
Key value for chemical safety assessment
- EC10 or NOEC for microorganisms:
- 10 mg/L
Additional information
The influence of the test matrial on the respiration rate of activated sludge was investigated after a contact time of 3 hours following OECD TG 209 and under GLP conditions.
The final test was performed based on the result of a preceding combined limit/range-finding test. Five loading rates, ranging from 10 to 1000 mg/l, increasing with a factor 3.2 were tested. Five replicates per loading rate and six replicates for an untreated control group were tested.
No statistically significant inhibition of the respiration rate of the sludge was recorded at a loading rate of 10 mg/l. At higher loading rates the inhibitory effect of the test material on aerobic waste water (activated sludge) bacteria increased with increasing loading rate, ranging from an average of 13% inhibition at a loading rate of 32 mg/l to an average of 61% at a loading rate of 1000 mg/l.
The batch of activated sludge was checked for sensitivity by testing the reference substance 3,5 -dichlorophenol, which showed normal sensitivity.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)