Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 210-536-9 | CAS number: 617-89-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Guidance on Safe Use
Administrative data
First-aid measures
Eye contact
Get medical attention immediately. Call a poison center or physician. Immediately flush eyes with plenty of water,
occasionally lifting the upper and lower eyelids.
Check for and remove any contact lenses. Continue to rinse for at least 10 minutes.
Chemical burns must be treated promptly by a physician.
Inhalation
Get medical attention immediately. Call a poison center or physician. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open airway.
Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire,
symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.
Skin contact
Get medical attention immediately. Call a poison center or physician.
Wash with plenty of soap and water. Remove contaminated clothing and shoes.
Wash contaminated clothing thoroughly with water before removing it, or wear gloves.
Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly
by a physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion
Get medical attention immediately. Call a poison center or physician. Wash out mouth with water.
Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If material has been swallowed and the exposed person is conscious, give small quantities of water to drink.
Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel.
If vomiting occurs, the head should be kept low so that vomit does not enter the lungs.
Chemical burns must be treated promptly by a physician. Never give anything by mouth to an unconscious person.
If unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Protection of first-aiders
No action shall be taken involving any personal risk or without suitable training.
If it is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly
with water before removing it, or wear gloves.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media Use dry chemical, CO2, water spray (fog) or foam
Unsuitable extinguishing media Do not use water jet.
Special hazards arising from the substance or mixture
Hazards from the substance or mixture
Flammable liquid and vapour. In a fire or if heated, a pressure increase will occur
and the container may burst, with the risk of a subsequent explosion.
The vapour/gas is heavier than air and will spread along the ground.
Vapours may accumulate in low or confined areas or travel a considerable distance to a source of
ignition and flash back. Runoff to sewer may create fire or explosion hazard.
Hazardous combustion products
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
nitrogen oxides
Ammonia
Advice for firefighters
Special precautions for fire-fighters
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
Special protective equipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves)
conforming to European standard EN 469 will provide a basic level of protection for
chemical incidents.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Do not breathe vapour or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders
If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
Environmental precautions
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Methods and materials for containment and cleaning up
Small spill
Stop leak if without risk. Move containers from spill area. Dilute with water and mop
up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Use spark-proof tools
and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Large spill
Stop leak if without risk. Move containers from spill area. Approach the release
from upwind. Prevent entry into sewers, water courses, basements or confined
areas. Wash spillages into an effluent treatment plant or proceed as follows.
Contain and collect spillage with non-combustible, absorbent material e.g. sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations (see section 13). Use spark-proof tools and explosionproof
equipment. Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilt product.
Note: see section 1 for emergency contact information and section 13 for waste
disposal.
Handling and storage
Precautions for safe handling
Protective measures
Put on appropriate personal protective equipment (see Section 8). Do not get in
eyes or on skin or clothing. Do not breathe vapour or mist. Do not ingest. Use only
with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Do not enter storage areas and confined spaces unless adequately
ventilated. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Store and use away from
heat, sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use only non-sparking tools.
Take precautionary measures against electrostatic discharges. Keep away from
acids. Empty containers retain product residue and can be hazardous. Do not reuse
container.
Advice on general occupational hygiene
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.
Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. Store in a segregated and approved
area. Store in original container protected from direct sunlight in a dry, cool and wellventilated
area, away from incompatible materials (see section 10) and food and
drink. Store locked up. Eliminate all ignition sources. Separate from acids.
Separate from oxidizing materials. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabelled containers. Use
appropriate containment to avoid environmental contamination.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN2526
Shipping information
- Proper shipping name and description:
- FURFURYLAMINE
- Chemical name:
- FURFURYLAMINE
- Language:
- English
- Labels:
- flammable and corrosive
Special provisions / remarks
- Special provisions:
- Hazard identification
number
38
Limited quantity
5 L
Tunnel code
(D/E)
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN2526
Shipping information
- Proper shipping name and description:
- FURFURYLAMINE
- Chemical name:
- FURFURYLAMINE
- Language:
- English
- Labels:
- flammable and corrosive
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN2526
Shipping information
- Proper shipping name and description:
- FURFURYLAMINE
- Chemical name:
- FURFURYLAMINE
- Labels:
- flammable and corrosive
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN2526
Shipping information
- Proper shipping name and description:
- Furfurylamine
- Chemical name:
- Furfurylamine
- Labels:
- flammable and corrosive
Special provisions / remarks
- Remarks:
- Passenger and Cargo Aircraft
Quantity limitation: 5 L
Packaging instructions: 354
Cargo Aircraft Only
Quantity limitation: 60 L
Packaging instructions: 365
Limited Quantities -
Passenger Aircraft
Quantity limitation: 1 L
Packaging instructions: Y342
SpecialProvisionsopen allclose all
Exposure controls / personal protection
1. Technical protection measures
Use only with adequate ventilation. Use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapour or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
2. Organisational protection measures
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
3. Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
4. Feet protection
Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
5. Body protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. Recommended: Corrosion-resistant chemical
equipment.
6. Eye protection
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. Recommended: face shield
7. Respiratory protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator. Recommended: organic vapour
filter (Type A
Stability and reactivity
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
The product is stable
Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur
Conditions to avoid
Keep away from heat. Avoid all possible sources of ignition (spark or flame). Do not
pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat or
sources of ignition. Do not allow vapor to accumulate in low or confine
Incompatible materials
Reactive or incompatible with the following materials: oxidizing materials and acids.
Reactive or incompatible with the following materials: Aluminium. Copper.
Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
Disposal considerations
Waste treatment methods
Product
Methods of disposal
The generation of waste should be avoided or minimised wherever possible.
Significant quantities of waste product residues should not be disposed of via the
foul sewer but processed in a suitable effluent treatment plant. Dispose of surplus
and non-recyclable products via a licensed waste disposal contractor. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements.
Hazardous waste
Yes.
Waste material code (Flanders): 015, 034
European waste catalogue (EWC)
Waste code Waste designation
07 01 04* other organic solvents, washing liquids and mother liquors
Packaging
Methods of disposal
The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
European waste catalogue (EWC)
15 01 10* packaging containing residues of or contaminated by dangerous substances
Special precautions
This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapor from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.