Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
auto-ignition temperature (liquids)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
26 December - 27 December 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
The study was conducted according to an internationally recognised method, and under GLP. The test substance is adequately characterised. Therefore full validation applies.
Qualifier:
according to guideline
Guideline:
EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
Version / remarks:
2008
Deviations:
no
Qualifier:
according to guideline
Guideline:
DIN EN 14522, Method P (Determination of the auto ignition temperature of gases and vapours)
Version / remarks:
2005
Deviations:
no
Principles of method if other than guideline:
Not applicable
GLP compliance:
yes
Remarks:
Inspected on 4,5 and 6 July 2016/ Signed on 10 January 2017
Key result
Auto-ignition temperature:
442 °C
Atm. press.:
>= 958 - <= 977 hPa

Three trials were conducted. In the first one, the preselected auto-ignition temperature was set to 150°C but no ignition occurred and the test stopped automatically.

In the second one, the preselected auto-ignition temperature was set to 350°C but no ignition occurred and the test stopped automatically.

In the third one, the preselected auto-ignition temperature was set to 550°C. The auto-ignition of the substance was tested in varying amount of substance (between 2 and 11 droplets) and temperature (between 447 and 459°C).

Finally, three determinations were performed and then, three lowest auto-ignition temperatures were recorded as 449°C, 454°C and 452°C respectively using 5, 5 and 8 droplets.

 

As these temperatures did not differ by more than 2%, these results were considered as valid and the lowest value (449°C) was retained. As described in DIN EN 14522:2005, the final auto-ignition temperature was obtained in reducing the retained value by the absolute deviation calculated using the reproducibility value (1.5% relative).

 

This value was rounded to the nearest 1 °C and a final auto-ignition temperature of 442°C was obtained.

 

Moreover, the apparatus control was performed less than 6 months before the test (control between 18 October 2017 and 20 October 2017 and measurements dated on 26 to 27 December 2017). The lowest auto-ignition temperature measured for each reference substance did not differ by more than 1.5% from the reference value.

 

Therefore, the results of this study were considered as valid.

Conclusions:
The auto-ignition temperature of test item was determined to be 442°C (lowest value of three determinations).
This parameter/method is not relevant for classification, however the information is useful regarding potential additional fire hazard. No particular hazard is anticipated in normal conditions of storage.
Executive summary:

The study was performed in order to determine the auto-ignition temperature of test item according to EU A.15 guideline.

The auto-ignition temperature of test item was determined to be 442°C (lowest value of three determinations). This value was determined using approximately 5 drops of test substance between 958 and 977 hPa.

Description of key information

The auto-ignition temperature of test item was determined to be 442°C between 958 and 977 hPa. (lowest value of three determinations)

No particular hazard is anticipated in normal conditions of storage.

Key value for chemical safety assessment

Autoflammability / Self-ignition temperature at 101 325 Pa:
442 °C

Additional information

A fully reliable experimental study, conducted according to EU A.15 guideline is available.

It is considered as a key study, and the result is retained as key data.

This parameter is not relevant for classification, however the information is useful regarding process safety and potential additional fire hazard.