Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 406-940-1 | CAS number: 126019-82-7 DP 211
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Administrative data
First-aid measures
Eye contact:
Immediately wash eyes with plenty of running water for at least 15 minimum. Remove contact lenses after the initial 1-2 minutes and continue
flushing for several additional minutes. Occasionally lift the upper and lower eyelids. Seek medical advice if irritation develops and persists.
Skin contact:
Wash affected skin area with plenty of water and soap for at least 15 minutes while removing contaminated clothing and shoes. Seek medical advice if irritation develops and persists.
Ingestion:
Seek medical advice if the victim feels unwell. Wash out mouth with plenty of water and give 2-4 cupfuls of water or milk to drink. Never give anythingby mouth to an unconscious person. Do not induce vomiting.
Inhalation:
Remove the victim from exposure into fresh air if adverse effects (e.g. dizziness, drowsiness or respiratory irritation) occur. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical advice if cough or other symptoms appear.
Fire-fighting measures
Suitable extinguishing media:
Water fog or fine spray, dry chemical fire, carbon dioxide extinguishers and foam; alcohol resistant foam (ACT type) are preferred; general purpose synthetic foams (including AFFF) or protein foams may function, but will be less effective.
Unsuitable extinguishing media:
Direct water stream.
Exposure hazards (combustion products):
During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/ or
irritating.
Combustion products may include and are not limited to:
Carbon monoxide, carbon dioxide and nitrogen oxide
Unusual Fire and Explosion Hazards:
Container may rupture from gas generation in a fire situation. Violent steam generation or eruption may occur upon application of direct water
stream to hot liquids. Vapours are heavier than air and may travel a long distance and accumulate in low lying areas.Ignition and/or flash back may
occur. Flammable mixtures may exist within the vapour space of containers at room temperature. Flammable concentrations of vapour can
accumulate at temperatures above flash point.
Special protective equipment for firefighters:
Wear positive-pressure self-contained breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers,boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance.
Special methods/instructions:
Keep people away. Isolate fire and deny unnecessary entry. Stay up wind. Keep out of low areas where gases (fumes) can accumulate. Water may not be effective in extinguishing fire. Use water spray to cool fire exposed containers and fire affected zone until fire is out and danger of reignition has passed. Fight fire from protected location or safe distance. Consider the use of unmanned hose holders or monitor nozzles. Immediately withdraw all
personnel from the area in case of rising sound from venting safety device or discoloration of the container. Burning liquids may be extinguished by dilution with water. Do not use direct water stream. May spread fire. Eliminate ignition sources. Move container from fire area if this is possible
without hazard. Burning liquids may be moved by flushing with water to protect personnel and minimize property damage.
Accidental release measures
Personal precautions:
Wear appropriate personal protective equipment (see section 8) during cleaning. Avoid contact with eyes and skin. Avoid inhalation. No smoking in
the area. Eliminate all sources of ignition in vicinity of spill or released vapour to avoid fire or explosion. Check area with combustible gas detector before re-entering area.
Environmental precautions:
Prevent the material from entering surface water or sanitary sewer system. Do not discharge directly to a water source. If accidental spillage or
washings enter drains or watercourses contact local Environment Agency.
Methods for cleaning up:
Pick up with absorbent material. Sweep up absorbed substance, place in suitable and properly labelled waste containers for later disposal. Residual
trace can be wiped away. Prevent entry into sewers and waterways. For large spills: Contain spilled material if possible. Ground and bond all
containers and handling equipment. Pump with explosion-proof equipment. If available,use foam to smother or suppress.
Handling and storage
Personal precautions:
Wear personal protective equipment (see section 8). Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing
vapour. No smoking, open flames or sources of ignition in handling and storage area.
Technical measures/Precautions:
Provide good ventilation (local exhaust) of the working area, safety showers and eye wash station near the workplace. Avoid release to the
environment. Ground/Bond container and receiving equipment. Use explosion-proof electrical equipment. Use only non-sparking tools. Keep
product away from heat, sparks, flame and other sources of ignition. Avoid exposure the sunlight, UV light or fluorescent light.
Technical measures/ Storage conditions:
Flammable mixtures may exist within the vapour space of containers at room temperature. Keep in the original container. Keep container tightly
closed in a cool, dry, well-ventilated place. Keep product away from heat, sparks, flame and other sources of ignition and out of direct sunlight and
away from incompatible materials.
Incompatible products:
Strong oxidizing agents, bases and aqueous acids.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 3082
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 3082
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl) phosphorothioate)
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 3082
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Technical measures:
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapour or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Organisational measures:
Organize regular exposure monitoring to check that exposure levels of operators stay beyond the Exposure Limit. Sampling and analysis should be carried out according to accepted methods.
Respiratory protection:
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. For emergency conditions, use an
approve positive-pressure self-contained breathing apparatus. Use the following CE approved air-purifying respirator: Organic vapor cartridge, t
ype A (boiling point >65 ºC) Recommended: NIOSH-approved respirator with minimum APF 10.
Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard EN374 should be worn at all times when handling chemical products.
Recommended: Butyl rubber, ethyl vinyl alcohol laminate ("EVAL"), natural rubber ("latex"), neoprene, nitrile/butadiene rubber ("nitrile" or "NBR"),
polyvinyl chloride ("PVC" or "vinyl") and viton.
Eye protection:
Safety eyewear complying with an approved standard should be used. Recommended: Safety goggles should be consistent with EN 166 or equivalent.
Skin and body protection:
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved bya specialist before handling this product. Recommended: Wear chemival-resistant protective clothing.
Stability and reactivity
Chemical Stability:
Stable under original conditions.
Conditions to be avoided:
Static discharges. Keep product away from heat, sparks, flame and other sources of ignition. Avoid direct sunlight and UV light.
Materials to avoid: Strong oxidizing agents, bases and strong acids.
Hazardous polymerization: Will not occur.
Hazardous decomposition products:
Thermal decomposition and burning may produce carbon monoxide, sulphur oxides(SOX ), phosphorus oxides (e.g. P2O5), and other toxic gases
and vapors.
Disposal considerations
Waste from residues:
Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste.
For used, contaminated and residual materials additional evaluations may be required. Do not dump into any sewers, on the ground, or into any
body of water.
Container:
Containers should be cleaned by appropriate method and then re-used or disposed by landfill or incineration as appropriate, in accordance with
local and national regulations. Do not remove label until container is thoroughly cleaned.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.