Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 407-560-9 | CAS number: 107934-68-9 CAF
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 3-4 Mar 1991
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- Also according to GLP.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.4 (Vapour Pressure)
- GLP compliance:
- yes
- Type of method:
- effusion method: vapour pressure balance
- Temp.:
- 25 °C
- Vapour pressure:
- 0 Pa
- Remarks on result:
- other: The statistical errors indicated represent an error range of about 23 %
- Conclusions:
- The vapour pressure of the test item was 3.458 x 10-7 Pa at 25°C.
- Executive summary:
The vapour pressure of test item was determined according to the EC A.4 method in compliance with GLP.
The test material has been determined to have a vapour pressure of 3.458 x 10-7 Pa at 25°C using the vapour pressure balance effusion method.
Reference
Results:
During initial pumpdown the observed vapour pressure of the sample at ambient temperature fell from around 2x10-2 Pascals using the rotary pump only to below the observable threshold (<5x10-4 Pascals) when the diffusion pump was used. On warming to 91 °C a vapour pressure of 7.8x10-4 Pascals was observed representing a rate of pumping of sample of around 0.1 μg per hour. The sample was then further pumped overnight at 100 -105 °C before Run 1 was performed and over this period the vapour pressure fell to below the detection limit. After Run 1 the sample was found to have remained intact after the measurements and consequently the vapour pressure determination is considered appropriate to the bulk of the substance. The vapour pressure at 25 °C obtained via extrapolation of the indicated vapour pressure reationship was 3.458x10-7 Pa.
Log Vp (Pa) = (-3719.373 / Temp (K)) + 0.6014
Description of key information
3.458E-07 Pa at 25 °C
Key value for chemical safety assessment
- Vapour pressure:
- 0 Pa
- at the temperature of:
- 25 °C
Additional information
The vapour pressure of the substance was determined at 25 °C according to EEC Method A.4 (1984). The effusion method (vapour pressure balance) was applied.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
