Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-652-0 | CAS number: 943986-70-7
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_physical-and-chemical-properties.png)
Appearance / physical state / colour
Administrative data
- Endpoint:
- appearance / physical state / colour
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 20/12/2018
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
Cross-reference
- Reason / purpose for cross-reference:
- reference to other study
Reference
- Endpoint:
- particle size distribution (granulometry)
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 20/12/2018 - 14/02/2019
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Reason / purpose for cross-reference:
- reference to other study
- Qualifier:
- according to guideline
- Guideline:
- ISO 13320 (Particle size analysis - Laser diffraction methods)
- Version / remarks:
- 2009
- Qualifier:
- according to guideline
- Guideline:
- other: CIPAC MT 187 (Particle size analysis by laser diffraction)
- Version / remarks:
- Handbook K, 2007
- Principles of method if other than guideline:
- According to REACH Article 13(3) tests on substances shall be conducted in accordance with the test methods laid down in a Commission Regulation or in accordance with other international test methods recognised by the Commission or the Agency as being appropriate. No particle size distribution test method is laid down in regulation (EC) No 440/2008. OECD 110 TG ‘Particle Size Distribution/FibreLength and Diameter Distributions’ dates from 1981 and describes two methods in detail; both methods have restrictions and are not applicable to the entire size range. ECHA’s Guidance on information requirements and Chemical Safety Assessment-Chapter R.7a stipulates that many methods are available for particle size measurements but none of them is applicable to the entire size range. The guidance mentions Laser scattering/diffraction as a method for particles of all kind and makes reference to ISO 13320:2009.
According to Guidance document EUR 20268 (2002), the laser diffraction technique is applicable to particles of respirable and inhalable size. The MMAD can be calculated when density is known. - GLP compliance:
- yes (incl. QA statement)
- Type of method:
- Laser scattering/diffraction
- Type of particle tested:
- primary particle
- Type of distribution:
- volumetric distribution
- Specific details on test material used for the study:
- Relative density: 1.09 (see Cross-reference)
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
The sample was observed to contain agglomerations and lumps of > 3500 μm. Test material was therefore manually sieved (3500 µm). Result:
66% by weight had a particle size of > 3500 μm.
34% by weight had a particle size of < 3500 μm; this fraction was used for laser diffraction analysis. - Mass median aerodynamic diameter:
- 439 µm
- Geometric standard deviation:
- 2.105
- Remarks on result:
- other: MMAD and GSD above are both the average of 5 runs. GSD was calculated from d50/d15.78. The St.dev. in the table below is the population standard deviation [µm].
- Key result
- Percentile:
- D10
- Mean:
- 146 µm
- St. dev.:
- 1.86
- Key result
- Percentile:
- D50
- Mean:
- 420 µm
- St. dev.:
- 6.33
- Key result
- Percentile:
- D90
- Mean:
- 799 µm
- St. dev.:
- 19.8
- No.:
- #1
- Size:
- < 10 µm
- Distribution:
- 0 other: vol%
- Conclusions:
- Manual sieve analysis showed that 66% (w/w) of the substance had a particle size of > 3500 μm and 34% (w/w) a particle size of < 3500 μm.
Laser diffraction results for the substance fraction < 3500 µm:
D10= 146 µm, D50= 420 µm and D90= 799 µm. The MMAD was calculated to be 439 µm. - Executive summary:
The particle size distribution of the substance was performed in a GLP study according to ISO 13320 and CIPAC MT 187. The sample was observed to contain lumps and clusters. Manual sieve analysis was therefore performed: 66% (w/w) of the substance had a particle size of > 3500 μm and 34% (w/w) had a particle size of < 3500 μm. The laser diffraction analysis was conducted on the sample fraction < 3500 μm using the dry powder module. Each result is the average of five runs. Result for the fraction < 3500 µm:
D10= 146 µm, D50= 420 µm and D90= 799 µm. The MMAD was calculated to be 439 µm.
Coefficient of variation for D50 is < 3%; D10 and D90 are < 5%. These values are within the acceptable limits mentioned in the ISO 13320 standard.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2019
Materials and methods
Test guideline
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- Appearance was determined by visual observation.
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Reaction mass of (S)-2-[(R)-2-Oxo-4-propyl-1-pyrrolidinyl]butyramide and (S)-2-[(S)-2-Oxo-4-propyl-1-pyrrolidinyl]butyramide
- Cas Number:
- 943986-70-7
- Molecular formula:
- C11H20N2O2
- IUPAC Name:
- Reaction mass of (S)-2-[(R)-2-Oxo-4-propyl-1-pyrrolidinyl]butyramide and (S)-2-[(S)-2-Oxo-4-propyl-1-pyrrolidinyl]butyramide
- Test material form:
- solid
- Details on test material:
- - Appearance: Off-white solid
- Storage condition of test material: At room temperature protected from light
Constituent 1
Results and discussion
- Physical state at 20°C and 1013 hPa:
- solid
Form / colour / odour
- Key result
- Form:
- solid
- Colour:
- off-white
- Odour:
- other: not determined
- Substance type:
- organic
Applicant's summary and conclusion
- Conclusions:
- The substance is an off-white solid.
- Executive summary:
The substance was observed to be an off-white solid.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)