Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 271-708-7 | CAS number: 68604-99-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- January-July 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 835.2120 (Hydrolysis of Parent and Degradates as a Function of pH at 25°C)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: 0101891886
- Expiration date of the lot/batch: 14 September 2018 (retest date)
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: At room temperature
- Stability under test conditions: stable
- Solubility and stability of the test substance in the solvent/vehicle: Not indicated - Radiolabelling:
- not specified
- Analytical monitoring:
- yes
- Buffers:
- Buffer Solutions:
Acetate buffer pH 4, 0.01 M: Solution of 16.7% 0.01 M sodium acetate in water and 83.3% 0.01 M acetic acid in water. Buffer contained 0.0009% (w/v) sodium azide.
Phosphate buffer pH 7, 0.01 M: Solution of 0.01 M potassium di-hydrogen-phosphate in water adjusted to pH 7 using 1N sodium hydroxide. Buffer contained 0.0009% (w/v) sodium azide.
Borate buffer pH 9, 0.01 M: Solution of 0.01 M boric acid in water and 0.01 M potassium chloride in water adjusted to pH 9 using 1N sodium hydroxide. Buffer contained 0.0009% (w/v) sodium azide. - Details on test conditions:
- The rate of hydrolysis of the test item as a function of pH was determined at pH values normally found in the environment (pH 4-9).
Preliminary test:
The buffer solutions were filter-sterilised through a 0.2 µm FP 30/0.2 CA-S filter (Whatman, Dassel, Germany) and transferred into a sterile vessel. To exclude oxygen, nitrogen gas was purged through the solution for 5 minutes. The test item was spiked to the solutions at a target concentration of 10 mg/L using a spiking solution in acetonitrile. For each sampling time, duplicate sterile vessels under vacuum were filled with 6 mL test solution and placed in the dark in a temperature controlled environment at 50.1°C 0.1°C.
The spiking volume was ≤ 1% of the sample volume. Nominal concentrations were not corrected for the spiking volume.
The concentration of the test item in the test samples was determined immediately after preparation (t=0) and after 5 days. The samples taken at t=5 days were cooled to room temperature using running tap water.
Analysis was performed on subsamples of 900 µL. The samples were diluted in a 9:1 (v:v) ratio with acetonitrile. The samples were 10-fold further diluted with 10/90 (v/v) acetonitrile / buffer pH4, 7 or 9 to obtain concentration levels within the calibrated range. Blank buffer solutions containing a similar content of blank spiking solution were diluted in a 9:1 (v:v) ratio with acetonitrile and analyzed.
The pH of each of the test solutions (except for the blanks) was determined at each sampling time.
Main study:
Test samples were prepared and treated similarly as during the preliminary test. The concentrations of the test item were determined immediately after preparation (t=0) and at several sampling points after t=0.
Blank buffer solutions were treated similarly as the test samples and analyzed at t=0.
The pH of each of the test solutions (except for the blanks) was determined at least at the beginning and at the end of the test.
The study was performed at the following temperatures.
pH Temperature I Temperature II Temperature III
pH 4 19.9°C 0.2°C 49.7°C 0.9°C Study stopped, test item is stable
pH 7 19.9°C 0.2°C 50.1°C 0.5°C 60.6°C 0.2°C
pH 9 19.6°C 0.5°C 50.0°C 0.1°C 60.5°C 0.1°C
Chemicals and Reagents used in the test:
Chemical / Reagent: Supplier
Water: Tap water purified by a Milli-Q water purification system (Millipore, Bedford, MA, USA)
Acetonitrile: Biosolve, Valkenswaard, The Netherlands
Formic acid: Biosolve.
Sodium acetate: Merck, Darmstadt, Germany
Acetic acid, 100%: Merck
Potassium di-hydrogenphosphate: Merck
Boric acid: Merck
Potassium chloride: Merck
Sodium hydroxide, 1N: Merck
Sodium azide: Merck
All chemicals and reagents were of analytical grade, unless specified otherwise. - Duration:
- 14 d
- pH:
- 4
- Temp.:
- 20 °C
- Initial conc. measured:
- 10.6 mg/L
- Duration:
- 12 d
- pH:
- 4
- Temp.:
- 50 °C
- Initial conc. measured:
- 10.2 mg/L
- Duration:
- 18 d
- pH:
- 7
- Temp.:
- 20 °C
- Initial conc. measured:
- 10.4 mg/L
- Duration:
- 16 d
- pH:
- 7
- Temp.:
- 50 °C
- Initial conc. measured:
- 10 mg/L
- Duration:
- 18 d
- pH:
- 9
- Temp.:
- 20 °C
- Initial conc. measured:
- 10 mg/L
- Duration:
- 10 d
- pH:
- 9
- Temp.:
- 25 °C
- Initial conc. measured:
- 10 mg/L
- Duration:
- 17 h
- pH:
- 9
- Temp.:
- 50 °C
- Initial conc. measured:
- 10.4 mg/L
- Duration:
- 6 h
- pH:
- 0
- Temp.:
- 60 °C
- Initial conc. measured:
- 10 mg/L
- Positive controls:
- not specified
- Negative controls:
- not specified
- Preliminary study:
- At each pH, calibration curves at m/z 151.0 and at m/z 391.3 were constructed using six concentration levels. For each level, duplicate responses were used. Linear regression analysis was performed using the least squares method with a 1/concentration2 weighting factor. If necessary, one or two data points were excluded from the curve since the back calculated accuracy was > 15% from the nominal concentration or a deviation was observed in the response factor. The coefficient of correlation (r) was > 0.99 for each curve.
Details of the results are found in tables 20-23 in the section "other inforamtion includign tables" - Test performance:
- At each pH, calibration curves at m/z 391.3 were constructed using six concentration levels. For each level, duplicate responses were used. Linear or quadratic regression analysis was performed using the least squares method with a 1/concentration2 weighting factor. If necessary, one, two or three data points were excluded from the curve since the back calculated accuracy was > 15% from the nominal concentration or a deviation was observed in the response factor. The coefficient of correlation (r) was > 0.99 for each curve.
Details of the results are found in tables 24-35 in the section "other inforamtion includign tables" - Transformation products:
- not measured
- Key result
- pH:
- 4
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Type:
- (pseudo-)first order (= half-life)
- Key result
- pH:
- 7
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Type:
- (pseudo-)first order (= half-life)
- Key result
- pH:
- 9
- Temp.:
- 20 °C
- DT50:
- 18 d
- Type:
- (pseudo-)first order (= half-life)
- Key result
- pH:
- 9
- Temp.:
- 25 °C
- DT50:
- 10 d
- Type:
- (pseudo-)first order (= half-life)
- Key result
- pH:
- 9
- Temp.:
- 50 °C
- DT50:
- 17 h
- Type:
- (pseudo-)first order (= half-life)
- Key result
- pH:
- 9
- Temp.:
- 60 °C
- DT50:
- 5.7 h
- Type:
- (pseudo-)first order (= half-life)
- Details on results:
- Details of the results are found in tables 20-34 in the section "other inforamtion includign tables". As follows a description of the behaviour of the substance at the measured pHs:
pH 4
The analytical results of the main study at pH 4 are given in Table 24 to Table 26.
A small response at the retention time of the test item was detected in the chromatograms of the blank buffer solutions. This was probably caused by carry-over since a similar or higher response was observed in the analytical blank.
The mean recoveries of the test item containing buffer solutions at t=0 fell not within the criterion range of 90-110. Since hydrolysis is determined as relative to initial, this had no impact in the study
All logarithms of the relative concentrations were correlated with time using linear regression analysis. Figure 13 illustrates the regression curves. A degree of hydrolysis of < 10% was observed after 337 hours at pH 4, 20°C and after 288 hours at pH4, 50°C. It demonstrated that the half-life time of the test item at 25°C is > 1 year. According to the guideline, no further tests were required.
pH 7
The analytical results of the main study are given in Table 27 to Table 29.
A small response at the retention time of the test item was detected in one of the chromatograms of the blank buffer solutions. This was probably caused by carry-over since a similar or higher response was observed in the analytical blank. In all other chromatograms, no test item was detected.
The mean recoveries of the test item containing buffer solutions at t=0 fell within the criterion range of 90-110%. It demonstrated that the analytical method was adequate to support the hydrolysis study on the test item.
All logarithms of the relative concentrations were correlated with time using linear regression analysis. Figure 14 illustrates the regression curves. A degree of hydrolysis of < 10% was observed after 432 hours at pH 7, 20°C and after 384 hours at pH7, 50°C. It demonstrated that the half-life time of the test item at 25°C is > 1 year. According to the guideline, no further tests were required.
pH 9
The analytical results of the main study are given in Table 30 to Table 33.
A small response at the retention time of the test item was detected in one of the chromatograms of the blank buffer solutions. This was probably caused by carry-over since a similar or higher response was observed in the analytical blank. In all other chromatograms, no test item was detected.
The mean recoveries of the test item containing buffer solutions at t=0 were in the range of 102 -111%. It demonstrated that the analytical method was adequate to support the hydrolysis study on the test item.
For testing of pseudo-first order kinetics the mean logarithms of the relative concentrations between 10% and 90% were plotted against time. At all temperatures linear relationships were obtained.
The half-life times of the test item were determined according to the model for pseudo-first order reactions. All logarithms of the relative concentrations were correlated with time using linear regression analysis. Figure 15 illustrates the regression curves and Table 34 shows the statistical parameters. - Validity criteria fulfilled:
- yes
- Conclusions:
- The preliminary test (Tier 1) and main study (Tier 2) were performed for the determination of the rate of hydrolysis of Fatty acids, C18-unsatd., phosphates at pH values normally found in the environment (pH 4-9).
At pH 4 and pH 7 a degree of hydrolysis of < 10% was observed after 5 days at 50°C. According to the guideline, performance of the main study (Tier 2) was not required.
At pH 9, a degree of hydrolysis of ≥ 10% was observed after 5 days at 50°C and the main study was performed to determine the half-life time of the test item.
The half-life times (t(1/2)) of the test item were as follows:
pH 4 at 25 degrees celsisus: t(1/2) > 1 year
pH 25 at 25 degrees celsius: t(1/2) > 1 year
pH 9 at the following temperatures:
20 degrees celsius: t(1/2) 18 days
25 degrees celsius: t(1/2) 10 days
50 degrees celsius: t(1/2) 17 hours
60 degrees celsius: t(1/2) 5.7 hours - Executive summary:
The stability of Fatty acirds, C18 -unsatd., phosphates to hydrolysis at pH 4, 7 and 9 was tested on a preliminary study at 20, 25,50 and 60ºC (Ciric, J., 2018). The study was conducted according to OECD 111 andt the EEC C.7 guideline, "abiotic degradation: hydrolysis as a function of pH".
The preliminary test (Tier 1) and main study (Tier 2) were performed for the determination of the rate of hydrolysis of Fatty acids, C18-unsatd., phosphates at pH values normally found in the environment (pH 4-9).
At pH 4 and pH 7 a degree of hydrolysis of < 10% was observed after 5 days at 50°C. According to the guideline, performance of the main study (Tier 2) was not required.
At pH 9, a degree of hydrolysis of ≥ 10% was observed after 5 days at 50°C and the main study was performed to determine the half-life time of the test item.
The half-life times (t(1/2)) of the test item were as follows:
pH 4 at 25 degrees celsisus: t(1/2) > 1 year
pH 7 at 25 degrees celsius: t(1/2) > 1 year
pH 9 at the following temperatures:
20 degrees celsius: t(1/2) 18 days
25 degrees celsius: t(1/2) 10 days
50 degrees celsius: t(1/2) 17 hours
60 degrees celsius: t(1/2) 5.7 hours
Reference
Table 20
Preliminary Test: Hydrolysis of the Test Item at pH 4, pH 7 and pH 9m/z151.0
pH code |
Sampling time |
Analyzed concentration |
Degree of hydrolysis |
pH |
|
Individual |
Mean |
||||
pH 4 |
0 hours |
10.6 |
|
|
4.1 |
|
|
10.3 |
|
|
4.1 |
|
5 days |
10.4 |
0.73 |
-0.53 |
4.2 |
|
|
10.6 |
-1.8 |
|
4.2 |
pH 7 |
0 hours |
10.2 |
|
|
7.0 |
|
|
10.3 |
|
|
7.0 |
|
5 days |
10.2 |
0.32 |
-1.1 |
7.1 |
|
|
10.5 |
-2.6 |
|
7.1 |
pH 9 |
0 hours |
10.4 |
|
|
9.1 |
|
|
10.5 |
|
|
9.1 |
|
5 days |
10.2 |
2.2 |
1.7 |
9.0 |
|
|
10.3 |
1.2 |
|
9.1 |
Table 21
Preliminary Test: Hydrolysis of the Test Item at pH 4, pH 7 and pH 9m/z391.3
pH code |
Sampling time |
Analyzed concentration |
Degree of hydrolysis |
pH |
|
Individual |
Mean |
||||
pH 4 |
0 hours |
8.70 |
|
|
4.1 |
|
|
8.98 |
|
|
4.1 |
|
5 days |
5.73 |
35 |
38 |
4.2 |
|
|
5.20 |
41 |
|
4.2 |
pH 7 |
0 hours |
10.1 |
|
|
7.0 |
|
|
10.8 |
|
|
7.0 |
|
5 days |
8.93 |
14 |
12 |
7.1 |
|
|
9.47 |
9.3 |
|
7.1 |
pH 9 |
0 hours |
12.7 |
|
|
9.1 |
|
|
10.7 |
|
|
9.1 |
|
5 days |
0.0771 |
99 |
99 |
9.0 |
|
|
0.0771 |
99 |
|
9.1 |
1Estimated value, calculated by the extrapolation of the calibration curve.
Table 22
Preliminary Test: Recoveriesm/z151.0
pH code |
Nominal concentration |
Analyzed concentration |
Recovery |
|
Individual |
Mean |
|||
pH 4 |
10.0 |
10.6 |
106 |
104 |
|
10.0 |
10.3 |
103 |
|
pH 7 |
10.0 |
10.2 |
102 |
103 |
|
10.0 |
10.3 |
103 |
|
pH 9 |
10.0 |
10.4 |
104 |
105 |
|
10.0 |
10.5 |
105 |
|
Table 23
Preliminary Test: Recoveriesm/z391.3
pH code |
Nominal concentration |
Analyzed concentration |
Recovery |
|
Individual |
Mean |
|||
pH 4 |
10.0 |
8.70 |
87 |
88 |
|
10.0 |
8.98 |
90 |
|
pH 7 |
10.0 |
10.1 |
101 |
104 |
|
10.0 |
10.8 |
108 |
|
pH 9 |
10.0 |
12.7 |
127 |
117 |
|
10.0 |
10.7 |
107 |
|
Table 24
Main Test pH 4: Hydrolysis of the Test Item at 20°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
9.19 |
96 |
1.98 |
4.0 |
0.00 |
9.86 |
104 |
2.02 |
4.0 |
48.73 |
7.69 |
81 |
1.91 |
4.0 |
48.73 |
6.72 |
71 |
1.85 |
4.0 |
93.22 |
7.88 |
83 |
1.92 |
4.0 |
93.22 |
6.95 |
73 |
1.86 |
4.0 |
168.62 |
10.6 |
111 |
2.05 |
- |
168.62 |
8.84 |
93 |
1.97 |
- |
240.78 |
13.4 |
141 |
2.15 |
4.0 |
240.78 |
10.1 |
106 |
2.03 |
4.0 |
336.60 |
11.3 |
119 |
2.07 |
4.0 |
336.60 |
10.8 |
114 |
2.06 |
4.0 |
Table 25
Main Test at pH 4: Hydrolysis of the Test Item at 50°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
5.66 |
89 |
1.95 |
4.0 |
0.00 |
7.01 |
111 |
2.04 |
4.0 |
45.70 |
7.86 |
124 |
2.09 |
4.0 |
45.70 |
8.22 |
130 |
2.11 |
4.0 |
120.62 |
7.91 |
125 |
2.10 |
- |
120.62 |
8.54 |
135 |
2.13 |
- |
192.72 |
9.59 |
151 |
2.18 |
4.0 |
192.72 |
11.1 |
175 |
2.24 |
4.0 |
288.12 |
8.14 |
129 |
2.11 |
4.0 |
288.12 |
9.33 |
147 |
2.17 |
4.0 |
Table 26
Main Test pH 4: Recoveries
Temperature |
Nominal concentration |
Analyzed concentration |
Recovery |
|
Individual |
Mean |
|||
20 |
10.0 |
9.19 |
92 |
95 |
|
10.0 |
9.86 |
99 |
|
50 |
10.0 |
5.66 |
57 |
63 |
|
10.0 |
7.01 |
70 |
|
Table 27
Main Test pH 7: Hydrolysis of the Test Item at 20°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
10.3 |
99 |
1.99 |
7.0 |
0.00 |
10.6 |
101 |
2.01 |
7.0 |
48.40 |
9.65 |
92 |
1.97 |
7.0 |
48.40 |
11.1 |
106 |
2.03 |
7.0 |
92.88 |
5.25 |
50 |
1.70 |
7.0 |
92.88 |
10.6 |
101 |
2.01 |
7.0 |
240.45 |
12.6 |
120 |
2.08 |
7.0 |
240.45 |
12.3 |
118 |
2.07 |
7.0 |
432.83 |
11.8 |
113 |
2.05 |
7.0 |
432.83 |
13.7 |
131 |
2.12 |
7.0 |
Table 28
Main Test pH 7: Hydrolysis of the Test Item at 50°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
9.65 |
95 |
1.98 |
7.0 |
0.00 |
10.7 |
105 |
2.02 |
7.0 |
45.33 |
7.10 |
70 |
1.84 |
7.0 |
45.33 |
9.59 |
94 |
1.97 |
7.0 |
192.35 |
9.57 |
94 |
1.97 |
7.0 |
192.35 |
9.59 |
94 |
1.97 |
7.0 |
384.63 |
9.11 |
90 |
1.95 |
7.0 |
384.63 |
9.51 |
93 |
1.97 |
7.0 |
Table 29
Main Test pH 7: Recoveries
Temperature |
Nominal concentration |
Analyzed concentration |
Recovery |
|
Individual |
Mean |
|||
20 |
10.0 |
10.3 |
103 |
105 |
|
10.0 |
10.6 |
106 |
|
50 |
10.0 |
9.65 |
97 |
102 |
|
10.0 |
10.7 |
107 |
|
Table 30
Main Test pH 9: Hydrolysis of the Test Item at 20°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
10.3 |
99 |
1.99 |
9.0 |
0.00 |
10.6 |
101 |
2.01 |
9.0 |
48.00 |
8.75 |
84 |
1.92 |
9.0 |
48.00 |
9.61 |
92 |
1.96 |
9.0 |
92.48 |
8.93 |
86 |
1.93 |
9.0 |
92.48 |
9.21 |
88 |
1.95 |
9.0 |
240.05 |
7.90 |
76 |
1.88 |
9.0 |
240.05 |
8.71 |
83 |
1.92 |
9.0 |
335.87 |
6.60 |
63 |
1.80 |
9.0 |
335.87 |
7.16 |
69 |
1.84 |
9.0 |
432.43 |
6.20 |
59 |
1.77 |
9.0 |
432.43 |
6.82 |
65 |
1.81 |
9.0 |
503.42 |
5.18 |
50 |
1.70 |
9.0 |
503.42 |
5.18 |
50 |
1.70 |
9.0 |
595.18 |
4.53 |
43 |
1.64 |
9.0 |
595.18 |
4.69 |
45 |
1.65 |
9.0 |
693.88 |
2.86 |
27 |
1.44 |
9.0 |
693.88 |
3.25 |
31 |
1.49 |
9.0 |
741.38 |
2.99 |
29 |
1.46 |
9.0 |
741.38 |
3.41 |
33 |
1.51 |
9.0 |
Table 31
Main Test at pH 9: Hydrolysis of the Test Item at 50°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
9.93 |
97 |
1.99 |
9.0 |
0.00 |
10.6 |
103 |
2.01 |
9.0 |
2.05 |
8.95 |
87 |
1.94 |
9.0 |
2.05 |
9.88 |
96 |
1.98 |
9.0 |
3.08 |
9.25 |
90 |
1.96 |
9.0 |
3.08 |
9.88 |
96 |
1.98 |
9.0 |
20.77 |
4.14 |
40 |
1.61 |
9.0 |
20.77 |
4.55 |
44 |
1.65 |
9.0 |
23.10 |
3.71 |
36 |
1.56 |
9.0 |
23.10 |
3.75 |
37 |
1.56 |
9.0 |
25.25 |
2.92 |
28 |
1.45 |
9.0 |
25.25 |
3.49 |
34 |
1.53 |
9.0 |
26.22 |
3.27 |
32 |
1.50 |
9.0 |
26.22 |
3.46 |
34 |
1.53 |
9.0 |
26.88 |
3.32 |
32 |
1.51 |
9.0 |
26.88 |
3.46 |
34 |
1.53 |
9.0 |
44.98 |
1.60 |
16 |
1.19 |
9.0 |
44.98 |
1.45 |
14 |
1.15 |
9.0 |
52.47 |
1.00 |
10 |
0.99 |
9.0 |
52.47 |
1.03 |
10 |
1.00 |
9.0 |
93.02 |
0.231 |
2.2 |
0.35 |
9.0 |
93.02 |
0.221 |
2.2 |
0.33 |
9.0 |
1Estimated value, calculated by the extrapolation of the calibration curve.
Table 32
Main Test at pH 7: Hydrolysis of the Test Item at 60°Cm/z391.3
Sampling time
|
Analyzed concentration [mg/L] |
Relative concentration |
Logarithm relative |
pH |
0.00 |
11.2 |
101 |
2.00 |
9.0 |
0.00 |
11.0 |
99 |
2.00 |
9.0 |
1.87 |
7.98 |
72 |
1.86 |
9.0 |
1.87 |
8.51 |
77 |
1.88 |
9.0 |
2.33 |
7.61 |
69 |
1.84 |
9.0 |
2.33 |
8.18 |
74 |
1.87 |
9.0 |
2.95 |
7.59 |
68 |
1.83 |
9.0 |
2.95 |
8.05 |
73 |
1.86 |
9.0 |
3.90 |
6.55 |
59 |
1.77 |
9.0 |
3.90 |
6.84 |
62 |
1.79 |
9.0 |
4.67 |
5.90 |
53 |
1.73 |
9.0 |
4.67 |
6.25 |
56 |
1.75 |
9.0 |
5.22 |
5.68 |
51 |
1.71 |
9.0 |
5.22 |
5.67 |
51 |
1.71 |
9.0 |
5.65 |
5.42 |
49 |
1.69 |
9.0 |
5.65 |
5.80 |
52 |
1.72 |
9.0 |
23.75 |
0.567 |
5.1 |
0.71 |
9.0 |
23.75 |
0.610 |
5.5 |
0.74 |
9.0 |
31.23 |
0.251 |
2.3 |
0.36 |
9.0 |
31.23 |
0.261 |
2.3 |
0.37 |
9.0 |
1Estimated value, calculated by the extrapolation of the calibration curve.
Table 33
Main Test pH 9: Recoveries
Temperature |
Nominal concentration |
Analyzed concentration |
Recovery |
|
Individual |
Mean |
|||
20 |
10.0 |
10.3 |
103 |
104 |
|
10.0 |
10.6 |
106 |
|
50 |
10.0 |
9.93 |
99 |
102 |
|
10.0 |
10.6 |
106 |
|
60 |
10.0 |
11.2 |
112 |
111 |
|
10.0 |
11.0 |
110 |
|
Table 34
Main Test pH 9: Statistical Parameters Regression Curves
Temperature |
Slope |
Intercept |
Coefficient of correlation |
20 |
-6.87´10-4 |
2.02 |
0.96 |
50 |
-1.81´10-2 |
1.99 |
0.998 |
60 |
-5.24´10-2 |
1.99 |
0.9995 |
Table 35
Main Test pH 9: Rate Constants (kobs) and Half-life Time
(t½)
Temperature |
kobs |
t½ |
20 |
1.58´10-3 |
18 days |
25 |
2.86´10-3 |
10 days |
50 |
4.17´10-2 |
17 hours |
60 |
1.21´10-1 |
5.7 hours |
Description of key information
The stability of Fatty acirds, C18 -unsatd., phosphates to hydrolysis at pH 4, 7 and 9 was tested on a preliminary study at 20, 25,50 and 60ºC (Ciric, J., 2018). The study was conducted according to OECD 111 andt the EEC C.7 guideline, "abiotic degradation: hydrolysis as a function of pH".
The preliminary test (Tier 1) and main study (Tier 2) were performed for the determination of the rate of hydrolysis of Fatty acids, C18-unsatd., phosphates at pH values normally found in the environment (pH 4-9).
At pH 4 and pH 7 a degree of hydrolysis of < 10% was observed after 5 days at 50°C. According to the guideline, performance of the main study (Tier 2) was not required.
At pH 9, a degree of hydrolysis of ≥ 10% was observed after 5 days at 50°C and the main study was performed to determine the half-life time of the test item.
The half-life times (t(1/2)) of the test item were as follows:
pH 4 at 25 degrees celsisus: t(1/2) > 1 year
pH 7 at 25 degrees celsius: t(1/2) > 1 year
pH 9 at the following temperatures:
20 degrees celsius: t(1/2) 18 days
25 degrees celsius: t(1/2) 10 days
50 degrees celsius: t(1/2) 17 hours
60 degrees celsius: t(1/2) 5.7 hours
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 1 yr
- at the temperature of:
- 20 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.