Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 270-365-0 | CAS number: 68425-65-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water: screening tests
Administrative data
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 7 August 2012 to 5 September 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP compliant, guideline study, available as an unpublished report.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 013
- Report date:
- 2013
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.4-C (Determination of the "Ready" Biodegradability - Carbon Dioxide Evolution Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 835.3110 (Ready Biodegradability)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Aluminum, benzoate C16-18-fatty acids complexes
- EC Number:
- 303-385-6
- EC Name:
- Aluminum, benzoate C16-18-fatty acids complexes
- Cas Number:
- 94166-87-7
- Molecular formula:
- C23H37AlO5, C25H41AlO5
- IUPAC Name:
- Aluminum, benzoate C16-18-fatty acids complexes
- Test material form:
- other: Solid
- Details on test material:
- - Physical state: Pale Yellow Solid
- Purity: Not applicable - UVCB
- Substance identity: Aluminum, benzoate C16-18-fatty acids complexes
- Batch number: 11074091 + Benzoic acid
- Carbon Content: 65.1%
- Analysis code: A118/99
- Date received: 07 June 2012
- Expiration date: 01 July 2013
- Storage of test material: Room temperature in the dark
Constituent 1
- Specific details on test material used for the study:
- The substance is the Source of the read-across.
Study design
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge, domestic, non-adapted
- Details on inoculum:
- - Source of inoculum: Aeration stage of sewage treatment plant which treats predominantly domestic sewage.
- Storage conditions: Continuously aerated at 21°C
- Storage length: Used on day of collection
- Preparation of inoculum for exposure: Washed twice by settlement and resuspension in mineral medium to remove any excessive amounts of dissolved organic carbon (DOC) that may be present. Test vessels containing 2400 mL mineral medium and 22.5 mL inoculum were aerated with CO2 free air overnight prior to the addition of the test and reference items. The volume in all vessels was finally adjusted to 3 litres.
- Concentration of sludge: 4.0 g suspended solids/L prior to use.. - Duration of test (contact time):
- 28 d
Initial test substance concentrationopen allclose all
- Initial conc.:
- 10 mg/L
- Based on:
- other: Total carbon content
- Initial conc.:
- 15.4 mg/L
- Based on:
- test mat.
Parameter followed for biodegradation estimation
- Parameter followed for biodegradation estimation:
- CO2 evolution
- Details on study design:
- TEST CONDITIONS
- Composition of medium:OECD guideline mineral medium containing KH2PO4 (0.0850g/L), K2HPO4 (0.2175 g/L), Na2HPO4.2H2O ().3340 g/L), NH4Cl (0.005 g/L), CaCl2 (0.0255 g/L), MgSO4.7H2O (0.0225 g/L) and FeCl3 (0.00025 g/L).
- Test temperature: 21°C
- pH: 7.6 to 7.7
_ pH adjustment: If necessary, the pH was adjusted to 7.4 ± 0.2 using dilute hydrochloric acid or sodium hydroxide solution prior to aeration of the mineral medium
- Aeration of dilution water: Test vessels were sealed and CO2-free air was bubbled through the solutions at rates of 30 to 100 mL/minute/vessel and stirred continuously with a magnetic stirrer. CO2-free air was produced by passing compressed air through a glass column containing self-indicating lime soda.
- Suspended solids concentration: 30 mg/L
- Continuous darkness: yes
TEST SYSTEM
- Culturing apparatus: 5L test culture vessel
- Number of culture flasks/concentration: Two for test item, inoculate control and reference item. One for toxicity control (test item plus reference item).
- Method used to create aerobic conditions: Continuous aeration with C02-free air.
- Measuring equipment: inorganic carbon (IC) and total carbon (TC) channels of TOC analyser.
- Details of trap for CO2: Two 500 mL Dreschel bottles containing 350 mL of 0.05 M NaOH solutions with purified degassed water.
SAMPLING
- Sampling: 2 mL samples were taken from the first CO2 absorber vessels on days 0, 2, 6, 8, 10, 14, 21, 28 and 29 and analysed for CO2 immediately using IC channel of TOC analyser. Second absorber vessels were sampled on days 0 and 29.
CONTROL AND BLANK SYSTEM
- Inoculum blank: Inoculated mineral medium.
- Procedure control: Reference item (sodium benzoate) in inoculate medium to give a final concentration of 10 mg carbon/L.
- Toxicity control: Test item plus reference item in inoculated mineral medium to give a final concentration of 20 mg carbon/L.
Reference substance
- Reference substance:
- benzoic acid, sodium salt
Results and discussion
- Preliminary study:
- Not applicable
- Test performance:
- The results of the inorganic carbon analysis of samples from the first absorber vessels on day 29 showed a decrease in all replicate vessels, which was considered to be due to sampling/analytical variation. Inorganic carbon analysis of samples from the second absorber vessels on day 29 showed no significant carry-over of CO2.
% Degradation
- Parameter:
- % degradation (CO2 evolution)
- Value:
- 79
- Sampling time:
- 28 d
- Details on results:
- The test item satisfied the 10-day window validation criterion, whereby 60% degradation must be obtained within 10 days of the degradation exceeding 10%. The test item is therefore considered to be readily biodegradable under the strict terms and conditions of OECD Guideline No. 301B.
The toxicity control attained 64% degradation after 14 days and 87% degradation after 28 days thereby confirming the test item was not toxic to the sewage treatment micro-organisms used in the test.
BOD5 / COD results
- Results with reference substance:
- The reference substance (sodium benzoate) attained 82% degradation after 14 days and 92% degradation after 28 days thereby confirming the suitability of the inoculum and test conditions.
Any other information on results incl. tables
Table 1. Percentage Biodegradation Values
Day
|
Percentage Biodegradation |
||
Test item |
Sodium Benzoate Procedure Control |
Test Item plus Sodium Benzoate Toxicity Control |
|
0 |
0 |
0 |
0 |
2 |
21 |
56 |
36 |
6 |
28 |
68 |
46 |
8 |
40 |
70 |
53 |
10 |
52 |
80 |
51 |
14 |
64 |
82 |
64 |
21 |
61 |
83 |
69 |
28 |
75 |
90 |
79 |
29* |
79 |
92 |
87 |
* Day 29 values corrected to include any carry-over of CO2detected in Absorber 2
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Remarks:
- The total CO2 evolution in the inoculum control was < 40 mg/L (actual 27.36 mg/L). The IC content of the test item in the mineral medium at test start was < 5% (actual 2%). The difference in CO2 production at test end between replicates was < 20%.
- Interpretation of results:
- readily biodegradable
- Conclusions:
- Aluminum, benzoate C16-18-fatty acids complexes reached 79% degradation after 28 days, meeting the 10 day window, and therefore is considered to be readily biodegradable.
- Executive summary:
Aluminum, benzoate C16-18-fatty acids complexes reached 79% degradation after 28 days, meeting the 10 day window, and therefore is considered to be readily biodegradable. The ready biodegradability of the test item was determined in a GLP-compliant CO2 evolution test following OECD guideline 301B (Harlan 2012). The study is considered reliable and relevant for use for this endpoint. Aluminum, benzoate C16-18-fatty acids complexes is not considered to be inhibitory to sewage treatment micro-organisms.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)