Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-401-5 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Appearance / physical state / colour:
On the basis of physical observation and using the sense of smell, the Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was found to be a maroon colored lustrous liquid organic compound.
Melting point/ Freezing point:
The Freezing point of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was determined using freezing temperature method. No freezing was observed up to -9.69 °C.
Boiling point:
The mean of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was115.5°C at 975.5 hPa.
Density:
The mean density of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was found to be 1.1145 g/cm³ at 20°C and 975.9 hPa.
Particle size distribution (Granulometry):
In accordance with column 2 of Annex VII of the REAcH regulation this end point was considered for waiver since the chemical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate is a liquid and is expected to be marketed or used in a non solid or granular form.
Vapour pressure:
The estimated vapour pressure of the Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate at 25deg C was 1.08E-010 Pa.
Partition coefficient:
The partition Coefficient n-octanol/water of test chemiical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was determined by the Reverse Phase High Performance Liquid Chromatographic method according to OECD Guideline No. 117 for testing of Chemicals. The reference substances were chosen according to estimated Pow range of the test substance and generalized calibration graph was prepared. The reference substances were Phenol, Benzene, 2-Nitrophenol, Nitrobenzene, Diphenylamine, Dodecanoic acid, having Pow value ranging from 1.5 to 4.2. The Log Pow value of test chemical was determined to be 1.898 dimensionless at 25°C.This value indicates that the substance is hydrophilic in nature.
Water solubility:
The water solubility for the test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was found to be 216592 mg/L at 25°C.
Surface tension:
Based on the prediction done by ACD labs, the surface tension for chemical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was predicted to be 48.4 ± 5.0 dyne/cm.
Flash point:
The mean flash point of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was 141.3°C at 975.3hPa.
Autoflammability:
Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate is not auto-flammable.
Flammability:
Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus was considered as non-flammable.
Explosiveness:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.
Oxidising properties:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with oxidizing properties and hence the classification procedure does not need to be applied.
pH:
The pH of 1% w/v solution of the test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was 3.48 at 26.6 °C.
Viscosity:
Kinematic viscosity (experimental) of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate at 20°C and 40 °C was 41.3972 mm²/sec and 37.7910 mm²/s, respectively.
Dynamic viscosity (calculated) of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate at 20°C and 40 °C was 46.1371 mPa.S and 42.1180 mPa.S, respectively.
Additional information
Appearance / physical state / colour:
On the basis of physical observation and using the sense of smell, the Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was found to be a maroon colored lustrous liquid organic compound.
Melting point/ Freezing point:
The Freezing point determination of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was done using crushed ice and salt. No freezing was observed up to -9.69°C. Hence, the freezing point was inferred to be less than -9.69 °C at 976.2 hPa.
Boiling point:
The boiling point determination of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was done following OECD Guideline 103 and according to the method of Siwoloboff. The test was conducted in
replicates and mean was found to be 115.5°C at 975.5 hPa.
Density:
The density of test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was determined following OECD Guideline 109 and according toIS 4730 : 1994 (Reaffirmed 2010) – Method for Determination
of Density of Liquids (First Revision) using glass pyknometer. The mean density of test item was found to be 1.1145 g/cm³ at 20°C and 975.9 hPa.
Particle size distribution (Granulometry):
In accordance with column 2 of Annex VII of the REAcH regulation this end point was considered for waiver since the chemical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate is a liquid and is expected to be marketed or used in a non solid or granular form.
Vapour pressure:
Modified Grain method (Mean of Antoine and Modified Grain methods) was used to estimate the vapour pressure of the
Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate using MPBPVP v1.43 of EPI SUITE.
The estimated vapour pressure of the Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate at 25deg C was 1.08E-010 Pa.
Partition coefficient:
The partition Coefficient n-octanol/water of test chemiical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was determined by the Reverse Phase High Performance Liquid Chromatographic method according to OECD Guideline No. 117 for testing of Chemicals. The reference substances were chosen according to estimated Pow range of the test substance and generalized calibration graph was prepared. The reference substances were Phenol, Benzene, 2-Nitrophenol, Nitrobenzene, Diphenylamine, Dodecanoic acid, having Pow value ranging from 1.5 to 4.2. The Log Pow value of test chemical was determined to be 1.898 dimensionless at 25°C.This value indicates that the substance is hydrophilic in nature.
Water solubility:
The water solubility determination of test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate (CAS No. 41272-40-6) was done as per the OECD guideline 105 by spectrophotometric analytical method as per OECD 101. The solubility of ( Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate in water was found to be 216592 mg/L at 25°C.
Hence on the basis of experimental value the given chemical is considered to be very soluble in water.
Surface tension:
Based on the prediction done by ACD labs Software (v12.1.0.50375), the surface tension for chemical Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was predicted to be48.4 ± 5.0dyne/cm.
Flash point:
The flash point determination of Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was done following closed cup method using Pensky-Martens flash point apparatus. The test was conducted in replicates and mean flash point was found to be 141.3°C at 975.3hPa.
Autoflammability:
Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that [4-[α-[4-(dimethylamino)phenyl]benzylidene]cyclohexa-2,5-dien-1 -ylidene]dimethylammonium acetate is not auto-flammable.
Flammability:
Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus was considered as non-flammable.
Explosiveness:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.
Oxidising properties:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with oxidizing properties and hence the classification procedure does not need to be applied.
pH:
The pH determination of test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate(CAS No 41272-40-6) was done following OECD guideline 122. pH of 1% w/v solution was measured with the help of pH meter and it was observed to be 3.48 at 26.6 °C
Viscosity:
The viscosity determination of Test item Reaction mass of Methanaminium, N-[4-[[4-(dimethylamino)phenyl]phenylmethylene]-2,5-cyclohexadien-1-ylidene]-N-methyl- & acetate was done as per the test guideline OECD 114 using Redwood Viscometer No. 1. Kinematic viscosity (experimental) of Test item at 20°C and 40 °C is 41.3972 mm²/sec and 37.7910 mm²/s, respectively. Dynamic viscosity (calculated) of Test item at 20°C and 40°C was 46.1371 mPa.S and 42.1180 mPa.S, respectively.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.