Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 815-961-9 | CAS number: 1374760-95-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From July 10th 2017 to January 22nd 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- OECD guideline 209 was followed
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
- Version / remarks:
- OECD 209 for Testing of Chemicals (2010)
- Deviations:
- not specified
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- GLP certificate of Noack laboratorien GmbH : inspection between June 7th and 10th and on July 13th 2016.
- Specific details on test material used for the study:
- - Storage condition of test material:
Storage in closed, preferably full containers, away from heat sources and protected from extreme variations in temperature.
- Analytical monitoring:
- no
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: The reference item concentration was diluted out of a stock solution.
- Controls: Triplicates of the control without test item were included at the beginning and at the end of the test. - Test organisms (species):
- activated sludge
- Details on inoculum:
- - Name and location of sewage treatment plant where inoculum was collected:
Municipal sewage treatment plant of 31137 Hildesheim, Germany
- Preparation of inoculum for exposure: A fresh sample of activated sludge taken from the sewage plant Hildesheim was used for the test procedure. It was washed twice and adjusted with chlorine free tap water if necessary to a dry sludge concentration of 3.0 g/L ± 10 %.
- The sludge was used within 24 h after sampling.
- Pretreatment: The sludge was washed twice with chlorine free tap water and adjusted to a dry sludge concentration of 3.0 g/L ± 10 %. The sludge was used within 24 h after sampling.
- Dry sludge concentration : 3.16 g/L, corresponding to 1.58 g/L in the test vessel - Test type:
- static
- Water media type:
- other: Demineralised water
- Limit test:
- no
- Total exposure duration:
- 3 h
- Test temperature:
- 19.9 °C
- pH:
- pH-value of the activated sludge : 7.83, pH-value of the synthetic waste water: 7.28
- Dissolved oxygen:
- Kept above 60-70 %
- Nominal and measured concentrations:
- Nominal concentrations : 10 - 32 - 100 - 320 - 1000 mg/L were weighed out on object slides and were transferred to laboratory bottles.
- Details on test conditions:
- TEST SYSTEM
- Test vessel: 1000 mL laboratory bottles, ISO 4796
- Aeration: Shaking of the laboratory bottles at 150 rpm to keep the dissolved oxygen concentration above 60 - 70 % saturation and to maintain the sludge flakes in suspension.
- No. of vessels per concentration (replicates): 5 replicates
- No. of vessels per control (replicates): 3 replicates
- Sludge concentration (weight of dry solids per volume): 3.16 g/L
- Nutrients provided for bacteria: Synthetic waste water according to OECD Guideline 209
- Nitrification inhibitor used (delete if not applicable): none
OTHER TEST CONDITIONS
- Adjustment of pH: No
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) : inhibition of respiration
TEST CONCENTRATIONS
- Spacing factor for test concentrations: The definitive study was carried out with 5 concentrations within the range 10 - 1000 mg/L test item in a geometrical series and with a dilution factor of 3.2.
- Range finding study : A preliminary test (non GLP) was carried out with the concentrations of the test substance of 10 – 100 - 1000 mg/L with two replicates each.
- Test item concentrations (definitive test) : 10 - 32 - 100 - 320 - 1000 mg/L.
- Results used to determine the conditions for the definitive study: the inhibitions registered in the preliminary test were:
5 and 7 % for 10 mg test item/L
6 and 7 % for 100 mg test item/L
9 and 13 % for 1000 mg test item/L - Reference substance (positive control):
- yes
- Remarks:
- In order to check the activity of the test system and the test conditions a reference test was carried out with copper (II) sulphate pentahydrate as reference item and the reference toxicity was determined.
- Key result
- Duration:
- 3 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Duration:
- 3 h
- Dose descriptor:
- EC10
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Results with reference substance (positive control):
- The EC50-value for the reference item was 102 mg/L.
- Reported statistics and error estimates:
- When running a One Way Analysis of Variance a normality test and an Equal Variance test were done first. P-value for both tests was 0.05. The alpha-value (acceptable probability of incorrectly concluding that there is a difference) is alpha=0.05.
- Validity criteria fulfilled:
- yes
- Conclusions:
- The NOEC of the test substance is 1000 mg/L. The EC10 is > 1000 mg/L and the EC50 is > 1000 mg/L.
- Executive summary:
A respiration inhibition test with activated sludge according to OECD Guideline No. 209 was carried out with the test substance.
The test was carried out under static conditions with the test item concentrations 10 - 32 - 100 - 320 - 1000 mg/L. The respiration rates of the control, reference and test item replicates were measured after a contact time of three hours, and the inhibitory effects of the test and reference item were determined in comparison to the control respiration rates. In order to check the activity of the test system and the test conditions a reference test was carried out with copper (II) sulphate pentahydrate as reference item and the reference toxicity was determined. The EC50-value for the reference item was 102 mg/L. The NOEC of the test substance is 1000 mg/L. The EC10 is > 1000 mg/L and the EC50 is > 1000 mg/L.
Reference
Table 6.1.7/1: Oxygen uptake rates and specific respiration rates of the control replicates
|
Repl. |
Oxygen |
Oxygen Uptake Rate R |
Specific Respiration Rate Rs |
|
|
[mg O2/L] |
[mg O2/(L×h)] |
[mg O2/g×h] |
Control |
1 |
7.67 |
31.9 |
20.2 |
2 |
7.81 |
32.7 |
20.7 |
|
3 |
7.43 |
29.9 |
18.9 |
|
4 |
7.29 |
31.4 |
19.9 |
|
5 |
7.30 |
31.0 |
19.6 |
|
6 |
7.21 |
28.9 |
18.3 |
|
|
Mean value |
31.0 |
19.6 |
|
Standard deviation |
1.26 |
|
||
CV [%] |
4.1 |
(*) determined at start of the measurement
Repl. = Replicate
CV = Coefficient of variation
Table 6.1.7/2: Oxygen uptake rates and inhibition of the respiration of the test item concentrations
Test Item Concentration |
Repl. |
Oxygen |
Oxygen Uptake Rate R |
Inhibition |
Mean Inhibition |
[mg/L] |
|
[mg O2/L] |
[mg O2/(L×h)] |
[%] |
[%] |
10 |
1 |
5.81 |
30.8 |
1 |
8 |
2 |
6.01 |
30.2 |
3 |
||
3 |
5.69 |
28.6 |
8 |
||
4 |
6.84 |
28.7 |
7 |
||
5 |
5.16 |
24.5 |
21 |
||
32 |
1 |
6.08 |
30.3 |
2 |
6 |
2 |
6.10 |
31.0 |
0 |
||
3 |
5.79 |
28.8 |
7 |
||
4 |
6.97 |
29.1 |
6 |
||
5 |
5.22 |
26.5 |
15 |
||
100 |
1 |
5.81 |
30.8 |
1 |
8 |
2 |
5.96 |
30.9 |
0 |
||
3 |
6.17 |
28.9 |
7 |
||
4 |
11.9 |
25.4 |
18 |
||
5 |
5.72 |
25.9 |
16 |
||
320 |
1 |
6.39 |
30.2 |
3 |
9 |
2 |
6.42 |
29.8 |
4 |
||
3 |
6.07 |
27.4 |
12 |
||
4 |
6.55 |
29.8 |
4 |
||
5 |
5.32 |
24.9 |
20 |
||
1000 |
1 |
5.54 |
28.9 |
7 |
10 |
2 |
5.58 |
28.9 |
7 |
||
3 |
5.04 |
27.8 |
10 |
||
4 |
6.03 |
29.4 |
5 |
||
5 |
6.97 |
25.1 |
19 |
(*) determined at start of the measurement
Repl. = Replicate
Table 6.1.7/3: EC-Values with Confidence Interval of the test substance
|
EC-values |
Confidence interval |
NOEC* |
1000 |
̶ |
EC10 |
> 1000 |
– |
EC20 |
> 1000 |
– |
EC50 |
> 1000 |
– |
EC80 |
> 1000 |
- |
*) No statistically significant inhibition (P=0.211), ANOVA, Dunnett`s Method
Table 6.1.7/4: Oxygen Uptake Rates and Inhibition of the Respiration of the Reference Item Concentrations
Reference Item Concentration |
Repl. |
Oxygen |
Oxygen Uptake Rate R |
Inhibition |
Mean Inhibition |
[mg/L] |
|
[mg O2/L] |
[mg O2/(L×h)] |
[%] |
[%] |
58 |
1 |
7.68 |
23.8 |
23 |
27 |
2 |
8.07 |
22.9 |
26 |
||
3 |
7.55 |
21.5 |
31 |
||
100 |
1 |
8.17 |
17.5 |
44 |
46 |
2 |
8.19 |
17.3 |
44 |
||
3 |
7.66 |
15.6 |
50 |
||
180 |
1 |
8.77 |
7.6 |
75 |
77 |
2 |
8.59 |
7.4 |
76 |
||
3 |
8.24 |
6.5 |
79 |
(*) determined at start of the measurement
Repl. = Replicate
Description of key information
OECD Guideline 209, GLP, key study, validity 1:
3h-NOEC = 1000 mg/L
Key value for chemical safety assessment
- EC10 or NOEC for microorganisms:
- 1 000 mg/L
Additional information
A respiration inhibition test with activated sludge according to OECD Guideline No. 209 was carried out with the registered substance.
The test was carried out under static conditions with the test item concentrations 10 - 32 - 100 - 320 - 1000 mg/L. The respiration rates of the control, reference and test item replicates were measured after a contact time of three hours, and the inhibitory effects of the test and reference item were determined in comparison to the control respiration rates. In order to check the activity of the test system and the test conditions a reference test was carried out with copper (II) sulphate pentahydrate as reference item and the reference toxicity was determined. The EC50-value for the reference item was 102 mg/L.The NOEC of the test substance is 1000 mg/L. The EC10 is > 1000 mg/L and the EC50 is > 1000 mg/L.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.